What are the toll-free holidays on highways?

2 Answers
LaOwen
07/29/25 4:32am
Highway toll-free holidays include: the seven-day Spring Festival holiday, the three-day Qingming Festival holiday, the three-day Labor Day holiday, and the seven-day National Day holiday. For ordinary toll roads, the time is determined when the vehicle passes through the toll lane of the toll station, while for highways, the time is determined when the vehicle exits the toll lane at the exit. Highways are high-grade roads, which refer to roads with more than four lanes, separated two-way traffic, fully controlled entrances and exits, and all interchanges. In addition, many countries also refer to direct trunk roads with partially controlled entrances and exits and not all interchanges as highways. The advantages of highways include: 1. High speed; 2. Large traffic capacity; 3. Safe driving; 4. Reduced transportation costs; 5. Reduced energy consumption.
Was this review help?
9
5
Share
MacValerie
08/12/25 8:14am
I've been driving for over a decade. The toll-free holidays on highways mainly include the Spring Festival, Tomb-Sweeping Day, Labor Day, and National Day. The Spring Festival has the longest free period, usually a seven-day holiday, which makes returning to my hometown super convenient, though the roads get extremely congested, so I have to leave early. Tomb-Sweeping Day and Labor Day typically offer one day of free tolls, perfect for short trips to the suburbs to save some money. National Day provides seven days of free tolls, allowing families to save a lot on toll fees when driving to tourist spots. However, it's important to note that the free tolls only apply to passenger vehicles with seven seats or fewer; larger vehicles still have to pay. During holidays, traffic is heavy, so I recommend bringing snacks and water in case of traffic jams and hunger on the road—safety first, after all.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What Causes Car Windows to Fog Up in Summer?

Reasons for car window fogging: 1. Temperature difference between inside and outside the car: Due to the temperature difference between the inside and outside of the car, windows are prone to fogging. The reason is that the window glass, being in contact with the outside, has a lower temperature, causing water vapor inside the car to condense on the glass and form fog. 2. Window temperature below the dew point: When the air humidity is constant, if the window temperature is lower than the dew point, condensation is likely to form on the surface of the window, resulting in the common fogging phenomenon on the windshield. 3. Temperature difference between the two sides of the window: If the temperatures on both sides of the window are different, the surface water vapor pressure on the cooler side will be lower than the surrounding environment's vapor pressure, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in the usual fogging.
1
3
Share

How to activate Bluetooth in a 2012 Audi Q5?

Turn on the Bluetooth on your phone and the car's Bluetooth system, then connect successfully. Here is some related information about the Audi Q5: 1. Exterior: The FAW Audi Q5 features a distinctive large grille front face design, with an overall stylish and attractive appearance. The smooth and flowing body lines have received mostly positive feedback from users. 2. Interior: The domestic Q5 has a reasonably laid out and simple interior, rich and practical configurations, and a strong technological feel. The cabin workmanship is delicate with good material quality. 3. Performance: Equipped with a 2.0TFSI four-cylinder in-line engine and a 7-speed Stronic dual-clutch transmission, it delivers ample power output, smooth gear shifts, and quick acceleration. Users have praised its strong sense of push-back (thrust) during acceleration.
14
1
Share

What Causes Abnormal Engine Oil Level?

Abnormal engine oil level is caused by insufficient oil volume or excessively high oil level, leading to elevated oil temperature; malfunction of the oil pump; or clogging of the oil filter. Below are detailed explanations: 1. Oil volume issue: Insufficient oil volume or excessively high oil level results in elevated oil temperature. It is essential to maintain the proper oil volume for engine operation, with the oil level ideally between the upper and lower marks on the dipstick—neither too high nor too low. 2. Oil pump malfunction: If the oil pump malfunctions and delivers insufficient oil, it causes inadequate oil pressure and poor cooling. The solution is to closely monitor the oil pressure gauge to ensure the oil pump operates normally. If the oil pump fails, it is advisable to seek professional repair services rather than attempting DIY disassembly if inexperienced. 3. Clogged oil filter: When the oil filter is clogged, oil bypasses through the relief valve directly into the main oil passage. Contaminants in the oil can accelerate engine wear. The solution is to regularly clean the oil filter, replace the filter element, and ensure its proper functioning.
6
1
Share

What is the difference between 0W20 and 0W40?

The differences between 0W20 and 0W40 are as follows: 1. Base viscosity differs: 0W40 oil has a higher viscosity than 0W20 oil, meaning that at the same temperature, 0W40 oil has much poorer fluidity compared to 0W20. 2. High-temperature shear resistance differs: 0W40 oil is superior to 0W20 oil, providing a stronger and thicker oil film. 0W-40 oil offers better high-temperature protection, as higher kinematic viscosity in oil results in better high-temperature shear resistance. The higher the high-temperature shear resistance of the oil, the better the stability of the oil film and the engine protection capability. If the oil film is torn due to insufficient strength during high-speed engine operation, it can lead to wear. Below is relevant content introduction: Oil selection: Since oil significantly affects the performance and lifespan of the engine, it is essential to strictly follow the vehicle's user manual to select oil of the same series, service grade, and viscosity grade.
10
1
Share

How Long Does It Take to Change the Transmission Oil for a Fit?

Under normal circumstances, changing the transmission oil for a Fit takes about half an hour. Below are the methods for changing the transmission oil for a Fit: 1. There are two methods for changing transmission oil: one is gravity replacement, and the other is using a circulation machine. It is recommended to use the circulation machine method because it can clean the transmission, whereas gravity replacement only replaces the oil without cleaning the transmission. 2. The gravity oil replacement method generally involves lifting and securing the vehicle, finding a suitable container to hold the transmission oil, locating the transmission oil pan, and using tools to unscrew the drain plug, allowing the transmission oil to flow out. If adding ATF oil, there is usually a filling port. 3. The circulation machine replacement method uses specialized transmission cleaning equipment. During the operation of the transmission, the old oil is thoroughly circulated and completely drained before adding new transmission oil, achieving a replacement rate of over 90% and ensuring a good oil change effect.
6
1
Share

What is the difference between double wishbone and multi-link suspension?

Here are the differences between double wishbone and multi-link suspension: 1. Different composition: The multi-link independent suspension consists of links, shock absorbers, and damping springs. The double wishbone independent suspension is composed of upper and lower unequal-length V-shaped or A-shaped control arms and a pillar-type hydraulic shock absorber, with the upper control arm usually shorter than the lower one. 2. Different characteristics: The multi-link suspension not only ensures a certain level of comfort but also minimizes body tilt to the greatest extent possible. The double wishbone independent suspension is characterized by high lateral stiffness, excellent anti-roll performance, strong grip, and clear road feedback. 3. Different drawbacks: The disadvantages of the double wishbone independent suspension include high manufacturing costs and complex suspension positioning parameter settings. Additionally, the complexity of maintenance and servicing is high. The drawbacks of the multi-link independent suspension are its relatively complex structure, significantly higher material costs, R&D testing costs, and manufacturing costs compared to other types of suspensions, as well as its large space occupation.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.