What are the tire specifications of the Volkswagen Santana?

1 Answers
VanAlex
07/30/25 4:11am
The tire specifications of the Volkswagen Santana are 175/70R14 and 175/70R15, equipped with Hankook OPTIMO K415 tires in the size of 185/60R15. The spare tire is a non-full-size tire with the specification of 175/70R14. The Santana is a compact car under the Volkswagen brand, featuring a 4-door, 5-seat sedan body structure. Its dimensions are 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. In terms of suspension, the Santana is equipped with a MacPherson strut independent suspension at the front and a compound torsion beam non-independent suspension at the rear.
Was this review help?
11
5
Share
More Forum Discussions

Where does the water from the car air conditioner drain out?

Car air conditioner water drains from the bottom of the evaporator through a hose connected to the chassis. Here are some tips for using the car air conditioner: 1. Ventilate before turning it on: After the car has been exposed to the sun for a long time, open the four doors and sunroof to allow air to circulate inside the car for 3 minutes. This quickly lowers the interior temperature, making the air conditioner more effective when turned on. 2. Use the recirculation mode wisely: The recirculation mode blocks hot air from outside, creating a closed space inside the car, allowing the air to circulate quickly under the air conditioner's effect for rapid cooling. Once the interior temperature has dropped, it is recommended to switch to the fresh air mode every 30 minutes to purify the air inside the car, then switch back to recirculation mode after 5 minutes. 3. Turn off the air conditioner in time: Turn off the air conditioner 5 minutes before parking to protect the engine and save fuel.
12
2
Share

Why is the car's air conditioning not cooling properly?

There are 4 main reasons why a car's air conditioning may not cool properly: 1. The issue might be with the refrigerant in the car's air conditioning system. 2. Sometimes, excessive impurities in the refrigerant or frozen oil can clog the filter screen, increasing cooling resistance and reducing the flow of refrigerant to the expansion valve, leading to poor cooling. 3. The desiccant in the dryer may become saturated, preventing further moisture filtration. The car's air conditioning system has a dryer whose main function is to absorb moisture from the refrigerant and prevent excessive moisture from reducing cooling efficiency. When the desiccant is saturated, it can no longer filter out moisture. 4. The compressor's drive belt may be too loose, or the condenser's heat dissipation capacity may have decreased, both of which can reduce the air conditioning's cooling performance. Here are some air conditioning maintenance tips: 1. Avoid using the air conditioning's internal circulation mode for extended periods; 2. Do not frequently adjust the direction of the air conditioning vents.
2
5
Share

What will be displayed on the instrument panel when the Mazda 3's brake light fails

When the Mazda 3's brake light fails, the instrument panel will display: a bracket with a circle in the middle, and a crossed-out lock inside the circle. Brake lights are generally installed at the rear of the vehicle. The main body color is red, which enhances the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle in front even in low visibility conditions, thereby preventing rear-end collisions. The following are the classifications of automotive lights: 1. Headlights. Combined headlights are located at the front of the car and mainly serve the purpose of illumination and signaling. The light emitted by the headlights can illuminate the road conditions in front of the vehicle, allowing the driver to drive safely at night. 2. Combined taillights. Combined taillights are located at the rear of the car and mainly serve the purpose of illumination and signaling. 3. Turn signals. Used to indicate to other road users that the vehicle is turning left or right. Regulations require them to be amber. 4. License plate lights. License plate lights are mainly used to illuminate the license plate, allowing people to identify the vehicle license plate at night.
9
0
Share

What to Do If Your Driver's License Has Been Deducted 12 Points for Two Years Without Attending the Required Course?

If your driver's license has been deducted 12 points for two years without attending the required course, your driver's license will be revoked, and you will need to retake the exams. Relevant information is as follows: If a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security organ will detain their motor vehicle driver's license. The motor vehicle driver must, within fifteen days, attend a seven-day course on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security organ where the driver's license was issued or where the violation occurred. After completing the course, the vehicle management office will conduct a test on road traffic safety laws, regulations, and related knowledge within twenty days. If the test is passed, the points will be cleared, and the motor vehicle driver's license will be returned; if the test is failed, the driver must continue attending the course and retake the test. Refusal to attend the course or take the test will result in the traffic management department of the public security organ announcing the suspension of the motor vehicle driver's license.
17
2
Share

How to Remove a Broken Spark Plug from the Cylinder?

Remove the cylinder head, and after confirming the damage, use pliers to extract the broken spark plug. Remove the cylinder head, use an impact wrench to drive out the broken spark plug from the engine. After removal, use professional tools to rethread the spark plug hole, then install a new spark plug. Criteria for judging spark plug damage: Damaged spark plugs may exhibit the following symptoms: difficulty starting, reduced power, excessive exhaust emissions, and increased fuel consumption. Steps for replacing a spark plug: Open the hood, lift the engine's plastic cover, and remove the high-voltage wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to tighten it further. Reinstall the high-voltage wires in the firing order, then snap the cover back into place.
5
5
Share

What are the impacts of driving through water on a car?

Driving through water can have several impacts on a vehicle: 1. Rusting of the car chassis; 2. Water ingress into the headlights; 3. Rusting of the brake pads; 4. Clogging of the air filter; 5. Damage to the vehicle's electronic equipment, etc. When driving through water, it is essential to carefully assess the water's depth, flow speed, and the nature of the waterbed, as well as the width of the entry and exit points and road conditions, to determine if it is safe to proceed. After driving through water, the following safety checks should be performed: 1. Park the vehicle in a wide and safe area, remove any waterproof coverings, check if the engine ignition system has been exposed to water, and use a dry cloth to wipe any damp electrical components to prevent short circuits or disconnections. 2. Inspect all gearboxes for water ingress, check for any debris clogging the radiator fins, assess tire damage, and ensure there are no aquatic plants tangled under the chassis. Clean the vehicle promptly. 3. Start the engine and let it idle for several minutes until it reaches normal operating temperature to dry off any water and moisture on the engine.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.