What are the tire specifications for the Toyota Yaris L?

2 Answers
ValerieFitz
07/25/25 3:32am
The tire specifications for the Toyota Yaris L are divided into 175/65R14 and 185/60R15. The first numbers 175 and 185 represent the tire width in millimeters (175mm and 185mm). The numbers 60 and 65 indicate the aspect ratio of the tire's cross-section (60% and 65%), meaning the height of the cross-section is 60% or 65% of the width. The numbers 14 and 15 represent the rim diameter in inches (14 inches and 15 inches). The letter "R" in the middle stands for radial tire. The Toyota Yaris L uses Bridgestone (ECOPIA) tires, equipped with aluminum alloy rims, and the spare tire is a non-full-size specification. If you want to replace the tires yourself, you can follow these steps: Retrieve the spare tire and jack. Place the jack under the vehicle frame near the tire you intend to replace, ensuring the jack contacts the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure the jack is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully remove the nuts; just loosen them enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires also have the following common markings: Tire cord material: Indicated by Chinese Pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
19
0
Share
DiReese
08/10/25 5:01pm
The specific tires for the Toyota Yaris depend on the model year. My car is a 2022 base model, which comes with Dunlop ENASAVE EC300+ tires in size 185/60 R15. The higher trim versions in our car owner group have 16-inch wheels with a tire width of 195. The recommended tire pressure is around 2.2Bar, as indicated on the label near the trunk threshold. I recently checked my neighbor's 2018 Yaris, which uses Bridgestone tires in size 175/65 R15. It's best to check the label on your door frame for the most accurate information. Avoid changing tire sizes randomly when replacing them, as it might cause issues during annual inspections.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Can I pass the annual inspection after installing additional lights?

Installing additional lights without major modifications can pass the annual inspection. Chinese regulations classify the annual inspection of vehicle lights into the following categories: 1. First is the appearance inspection, where the inspector visually checks the vehicle for any unauthorized modifications. As long as the modifications are not excessive, they are generally acceptable. 2. Next is the instrument inspection on the testing line, which mainly focuses on the following aspects of the lights: 1. The color temperature must not exceed 6000K. The testing equipment can only detect light sources with a color temperature below 6000K. 2. Light scattering: The Road Traffic Safety Law stipulates that "vehicle lighting must not affect other road users." 3. Insufficient brightness: During the inspection, the requirement for low-beam headlights is that they must not be less than 1200 lumens. There is only a lower limit for brightness, not an upper limit. This means no matter how bright your headlights are, as long as they do not scatter, it is acceptable.
20
0
Share

What to Do If You Are Caught Driving Without Your License?

If you are caught driving without your license, you can provide other valid identification documents or show a photo of your driver's license that you have taken in advance and saved on your phone. Here is more information about driver's licenses: 1. Introduction to Driver's Licenses: The People's Republic of China Motor Vehicle Driver's License, commonly referred to as a driver's license or 'driving permit,' is a mandatory document issued in accordance with the laws of the People's Republic of China for individuals who operate motor vehicles. The driver's license records the holder's ID number, name, gender, date of birth, permanent address, nationality, permitted vehicle type code, date of first issuance, validity period, and management records. It also includes the issuing authority's seal, file number, and the holder's photo. 2. Situations Requiring License Confiscation: (1) Drunk driving. (2) Exceeding the speed limit by 50%.
2
2
Share

Why Are Both Low and High Pressures in Car Air Conditioning High?

Reasons for both low and high pressures being high in car air conditioning: 1. Under normal operation of the air conditioning, the low pressure is around 3 bar, and the high pressure is around 15 bar. Note that this is when the air conditioning is functioning normally, meaning the cabin blower is set to the fourth speed, the radiator cooling fan is running at high speed, and the external condenser is dissipating heat effectively. 2. If your air conditioning system shows high low pressure and low high pressure during normal operation, it could be due to insufficient compressor displacement or a malfunctioning expansion valve. Here is some related information about car air conditioning: Brief Introduction to Refrigeration Principle: 1. After the user starts the car air conditioning system, the compressor operates, driving the refrigerant to circulate within the sealed air conditioning system. The compressor compresses the gaseous refrigerant into high-temperature, high-pressure refrigerant gas, which is then discharged from the compressor. It flows through the pipeline into the condenser, where it dissipates heat and cools down, condensing into high-temperature, high-pressure liquid refrigerant before flowing out. 2. The high-temperature, high-pressure liquid refrigerant enters the dryer reservoir through the pipeline. After being dried and filtered, it flows into the expansion valve for throttling, undergoing a drastic change in state and turning into low-temperature, low-pressure liquid refrigerant. This then enters the evaporator, where it absorbs heat from the air passing through the evaporator, lowering the air temperature and blowing out cold air, thereby producing a cooling effect. 3. The refrigerant itself evaporates into low-temperature, low-pressure gaseous refrigerant after absorbing heat. It is then sucked into the compressor through the pipeline, compressed, and enters the next cycle. As long as the compressor continues to operate, the refrigerant will circulate continuously within the air conditioning system, producing a cooling effect. When the compressor stops working, the refrigerant in the air conditioning system stops flowing, and no cooling effect is produced.
5
2
Share

What to Do When the Car Makes Abnormal Noises but Fails to Start?

Abnormal noises during car ignition may be due to a dead battery, empty fuel tank, or incorrect gear position. Below is relevant information about the car ignition system: 1. Definition of the car ignition system: It is designed for spark-ignition engines to function properly by supplying the spark plugs with sufficiently high-voltage electricity (approximately 15,000 to 30,000V) in the correct firing order for each cylinder, ensuring a strong spark to ignite the combustible mixture. 2. Classification of car ignition systems: (1) Conventional ignition system: The mechanical ignition system operates by the crankshaft driving the distributor shaft rotation, where the cam on the distributor shaft opens and closes the primary contacts of the ignition coil to generate high voltage. (2) Electronic ignition system.
20
2
Share

How Long After Car Window Tinting in Summer Can You Roll Down the Windows?

Introduction to the time for rolling down windows after car window tinting in summer: In summer, windows should not be rolled down for 3 days, while in winter when temperatures are lower, they should remain closed for 7 days. However, due to differences in installation techniques, the recommended time may vary. It is advised that car owners consult with the installation personnel after the tinting is completed to avoid any abnormalities during use. Here are some precautions after car window tinting: 1. Do not rush to wash the car immediately after tinting: Especially within the first three days after tinting, try to avoid washing the car. Washing the car prematurely may cause bubbles in the tint film, and in severe cases, the film may peel off. If the car body is dirty, it is recommended to clean it with a damp cloth, avoiding the use of sharp objects to prevent scratching the film. 2. Do not rush to roll down the windows: After the tinting is completed, do not roll down the windows prematurely. Doing so may cause the edges of the film to curl up, and for films that are not well-adhered, they may shift, affecting both the appearance and the lifespan of the film. In winter, it is generally recommended not to roll down the windows for seven days after tinting. 3. Repair bubbles in the film promptly: If bubbles are found in the car window film, they should be addressed immediately. However, do not attempt to fix them yourself; seek professional repair services to ensure the aesthetic and functional quality of the tint. Repairs should generally be done within 24 hours, as delays can affect the repair outcome and increase the difficulty of the process.
3
3
Share

What kind of car is Isuzu?

Isuzu is a Japanese automobile manufacturer. Here are some relevant introductions about Isuzu vehicles: 1. Brand advantages: Isuzu is a Japanese automobile manufacturing company headquartered in Tokyo, Japan, integrating manufacturing and assembly. It is renowned for producing commercial vehicles and diesel engines. 2. Origin of the models: In Showa 9 (1934), mass production of automobiles began according to the standard model of the Ministry of International Trade and Industry, and the brand was named 'Isuzu' after the Isuzu River near the Ise Grand Shrine. Since Showa 24, when the trademark and company name were unified, the company has consistently used the name 'Isuzu Motors Limited' to this day.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.