What are the tire specifications for the Jeep Compass?
2 Answers
The Jeep Compass comes with two tire specifications: 225/60R17 and 225/55R18. In 225/60R17, the first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 17 denotes the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. In 225/55R18, the first number 225 represents the tire width of 225MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 18 denotes the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. The tires used on the Jeep Compass are from the brand Nexen (NEXEN), with the tread pattern NPRIZRH7, featuring five-spoke star-shaped rims. All models come with a non-full-size spare tire. If you wish to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring it touches the metal part of the frame. Raise the jack until it supports the car, ensuring the jack is positioned under the vehicle and at a right angle to the ground. Remove the hubcap, loosen the nuts counterclockwise, but do not fully remove them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures the nuts turn, not the tire. Continue turning the nuts counterclockwise until they are loose, repeating this for all lug nuts, then remove them completely. Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts, tightening them by hand until all nuts are snug. The tire replacement is now complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
The tire specifications of the Jeep Compass typically vary depending on the configuration, but the most common standard sizes are 225/60 R17 or 225/55 R18. Here, 225 represents the tire width in millimeters, 60 or 55 is the aspect ratio indicating the sidewall height proportion, and R17 or R18 refers to the rim diameter. As an owner who has driven this vehicle for years, I find this size design well-suited for urban driving and light off-roading, as it strikes a balance between comfort and grip. I would recommend regularly checking the tire pressure to maintain it between 32-35 PSI to optimize fuel efficiency and extend tire life. For harsh terrains, opting for all-terrain tires would enhance durability, but ensure the new tires match the factory specifications to avoid compromising steering stability. Replace tires early when tread wear occurs, and use professional equipment to measure depth to prevent blowout risks. Overall, the Jeep Compass benefits from its well-considered tire setup, but maintenance is a crucial part of daily driving—neglecting it may increase accident risks.