What are the tire specifications and models for the Hyundai Elantra?

2 Answers
McAurora
07/28/25 9:37pm
There are two tire specifications for the Hyundai Elantra: the 195/65R15 tires equipped on the 2020 Hyundai Elantra 1.6L automatic GL Yue Mu version, and the 205/55R16 tires equipped on the 2020 Hyundai Elantra 1.6L automatic DLX Yue Xin version. In the 195/65R15 specification, the first number 195 represents the tire width of 195MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 represents the rim diameter of 15 inches. The letter "R" in the middle stands for radial tire. In the 205/55R16 specification, the first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 represents the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. The Hyundai Elantra uses Hankook OPTIMO tires, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and check to ensure the jack is at a right angle to the ground. Remove the hub cap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning. Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and completely remove the nuts. Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten the nuts by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the following common data is also marked on the tire: Tire carcass ply material: indicated by Chinese pinyin, such as M-cotton ply, R-rayon ply, N-nylon ply, G-steel ply, ZG-steel radial ply tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.02F".
Was this review help?
20
2
Share
DeBenjamin
08/12/25 2:14am
I've been driving a Hyundai Elantra for several years, and the standard tire size is usually 205/55R16, which is quite common. This size is suitable for daily driving, offering comfort and fuel efficiency, but the actual size may vary depending on the model year. For example, post-2018 models sometimes use 215/50R17. When choosing tires, I usually consider road conditions. All-season tires are fine for city driving, but for rough rural roads, more durable types are necessary. For maintenance, don't forget to regularly check tire pressure and tread wear to avoid affecting fuel consumption and safety. The original tires are often Hankook or Giti, and when replacing, stick to the same size to avoid affecting handling. In short, knowing your tire specifications can help you drive with more peace of mind.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What are the new regulations for the second subject of the driving test in Guangdong?

The new regulations for the second subject of the driving test in Guangdong are as follows: 1. Small automatic transmission vehicles: The test content for small automatic transmission vehicles has been adjusted, with the "slope fixed-point parking and starting" item being removed from the second subject test. The number of test items has been reduced from 5 to 4, making it more aligned with actual driving requirements and reducing the test burden on candidates. 2. Test appointment time: The test appointment time has been adjusted. For applicants applying for a small automatic transmission vehicle driving license, the interval between the first subject test pass and the third subject test appointment has been reduced from 30 days to 20 days. For those upgrading to a large or medium-sized passenger or truck driving license, the interval has been reduced from 40 days to 30 days, thereby reducing waiting time for the test.
1
1
Share

Why Doesn't the Steering Wheel Return to the Center Position?

Analysis and solutions for why the steering wheel does not return to the center position are as follows: 1. Cause Analysis: In 99% of cars, the steering wheel automatically turns back toward the straight position after making a turn. This is not a design feature of the steering wheel but occurs because the tires tend to move in the direction of least resistance as the car continues forward, which is the straight direction. This causes the steering wheel to "automatically" return to the center. Some vehicles have tires that are too small, resulting in minimal contact area with the ground, which reduces the tendency for the tires to return to the straight position. 2. Solution: Adjust the wheel alignment: Generally, when a vehicle exhibits a steering wheel that does not return to the center, the first solution to consider is adjusting the wheel alignment. Wheel alignment refers to the relative position relationship between the wheels and the chassis (wheels, steering knuckles, front axle, etc.). If the wheel alignment parameters change, it can lead to issues such as the steering wheel not returning to the center, heavy steering, steering pull, and tire wear.
10
5
Share

What is the reason for the continuous illumination of the yellow engine symbol light?

Engine fault yellow light continuously illuminated indicates that there is a fault in the car's engine. The specific reasons are as follows: 1. There may be an issue with the gasoline combustion or excessive engine carbon buildup causing poor combustion conditions, which could result in the yellow light staying on. In this case, it is necessary to promptly inspect the engine and take the vehicle to a repair shop for maintenance. 2. The engine's oxygen sensor is malfunctioning, causing the engine fault yellow light to illuminate. This situation does not affect the normal operation of the car; simply replace the oxygen sensor at a convenient time. 3. Problems such as clogged fuel injectors or carbon buildup in the intake valves trigger the fault light alarm. This may be due to dust entering the engine or poor fuel quality causing engine faults, leading to the yellow light coming on.
18
0
Share

Can I renew my driver's license if it expired two days ago?

You can renew your driver's license even if it expired two days ago. However, driving with an expired license will result in a fine. According to Article 95 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If a motor vehicle driver commits any of the following acts, the traffic management department of the public security organ shall impose a fine; if the motor vehicle driver's license is seized, detained, or temporarily suspended, and the driver obtains a replacement license by concealment or deception; if the driver's physical condition changes and is no longer suitable for driving a motor vehicle but continues to drive; if the driver fails to participate in the required review and continues to drive; if any of the circumstances specified in the first or second item of the first paragraph occurs, the traffic management department of the public security organ shall revoke the motor vehicle driver's license. Methods to renew a driver's license: The motor vehicle driver can apply for renewal at the vehicle management office where the license was originally issued by submitting the required materials. The vehicle management office will process the renewal within one working day upon approval. Renew through the "Traffic Management 12123" APP. Download the app, select "Service Center" → "Expired License Renewal Service" → fill in the required information. The new license is usually delivered by mail. Visit a designated postal service point with "Police-Medical-Post" services to renew the license. The entire process, including registration, medical examination, and license production, takes only half an hour. Currently, this service is available in only a few cities, such as Hangzhou. Penalties for driving with an expired license: Driving with an expired license is treated as driving without a license. If the license has been expired for less than one year, the driver can renew it at any time, but driving during this period will result in a 200 CNY fine. If the license has been expired for more than one year but less than three years, the traffic management department will cancel it. The driver must retake and pass the theory test (Subject 1) to restore the license. Driving during this period will result in a fine ranging from 200 CNY to 2000 CNY. If the license has been expired for more than three years, it will be permanently canceled. The driver must retake all driving tests to obtain a new license. Driving without a valid license will result in a 2000 CNY fine and up to 15 days of administrative detention.
5
1
Share

What is the appropriate oil temperature for a car?

Between 90°C and 110°C. The normal oil temperature of an engine falls within this range, although local temperatures may be slightly higher, but generally do not exceed the normal coolant temperature. If the car is driven at high speeds, the temperature will also be relatively higher. Reasons for excessive temperature: If the vehicle is driven at high speeds, the oil temperature may reach around 110°C. However, it typically does not exceed 120°C. If the oil temperature consistently trends above 120°C, then there is a problem. Reasons for temperature rise: The rise in oil temperature is due to scale or dirt in the radiator increasing the resistance to coolant flow, or a loose water pump belt reducing the coolant flow rate.
5
1
Share

Why is there no sound when locking the X-Trail?

If there is no sound when locking the X-Trail, it may be because the doors are not properly closed or the trunk is not fully shut. It could also be due to poor wire contact or a broken circuit, or the horn itself might be water-damaged or defective. It is recommended to have it checked at a repair shop. If you want to set the locking to silent mode, you can press both the unlock and lock buttons on the remote control simultaneously for more than three seconds to switch between the two modes. Things to note when locking the vehicle: 1. After locking: Develop a good habit of pulling the door handle again to confirm that the doors are indeed locked. If the doors are not properly locked or are interfered with by electromagnetic waves, items inside the car may be stolen; 2. Continuous sound after locking: Some vehicles may produce a continuous sound from the front, but there is no need to worry as it will automatically stop within a few minutes. That is the sound of the fan rotating.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.