What are the tire size specifications for the Haval H6?
2 Answers
The Haval H6 has five tire size specifications: 225/65R17, 225/60R18, 225/55R19, 235/60R18, and 235/55R19. In 225/65R17, the first number 225 represents the tire width of 225MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 17 represents the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. In 225/60R18, the first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. In 225/55R19, the first number 225 represents the tire width of 225MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 19 represents the rim diameter of 19 inches. The letter "R" in the middle stands for radial tire. In 235/60R18, the first number 235 represents the tire width of 235MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 18 represents the rim diameter of 18 inches. The letter "R" in the middle stands for radial tire. In 235/55R19, the first number 235 represents the tire width of 235MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 19 represents the rim diameter of 19 inches. The letter "R" in the middle stands for radial tire. The Haval H6 tires are from the brand Hankook and feature a multi-spoke cyclone black wheel design. The spare tire specification is non-full size. If you want to replace the tires yourself, follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire you want to replace, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully loosen them; just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and completely remove them. Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are hidden. At this point, the tire replacement is complete. In addition to the model, the tires are marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
The Haval H6 has quite a variety of tire size specifications, depending on the specific model. I've driven several H6 variants and recall that the standard version typically uses 225/65 R17 or 215/65 R16 tires, with a 225mm tread width, 65% aspect ratio, and 17-inch rims. The sport version might be equipped with 235/60 R18 or even larger tires – for instance, the 235 indicates wider tires that provide better stability. When replacing tires, it's crucial to match the original factory size; improper modifications could affect speedometer accuracy and fuel consumption. I've also noticed that manual transmission base models occasionally use 215-width tires for better fuel efficiency, though with slightly reduced handling. Regular checks of tire wear and pressure are essential for safer highway driving.
