What are the tire models for the Q3?

1 Answers
DeLucy
07/29/25 11:26am
Audi Q3 tire model is 235/55R17. The first number 235 represents the tire width of 235MM, 55 indicates the tire section aspect ratio is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 17 represents the rim diameter of 17 inches. The Audi Q3 has a top speed of 230km/h, accelerates from 0 to 100km/h in 2.6 seconds, and has a fuel consumption of 7.2L per 100km. In addition to the model, the tire also has the following common data marked on it: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings are: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification that matches the tire. For practical use, such as 'Standard rim 5.00F'.
Was this review help?
9
0
Share
More Forum Discussions

What does it mean when a 4S shop has the car but not the certificate of conformity?

4S shop having the car but not the certificate of conformity is a typical case where the after-sales department has mortgaged the certificate with the bank. Below are specific explanations about the vehicle certificate of conformity: 1. Meaning: The certificate of conformity is another important document for a car and is essential for vehicle registration. Only cars with a certificate of conformity meet the national requirements for motor vehicle equipment quality and related standards. 2. Regulation: After a vehicle is sold, the consumer pays, and the dealer delivers the car, forming a de facto sales contract. If the dealer delivers the vehicle without the certificate of conformity, preventing the consumer from registering the vehicle or obtaining insurance, it constitutes incomplete fulfillment of the contract.
6
5
Share

Which way to turn the steering wheel when the rear of the car drifts to the left?

When the rear of the car drifts to the left, you should turn the steering wheel to the left. Here is some additional information about car steering wheels: Method of operating the steering wheel: If you imagine the steering wheel as a clock face, the correct hand position should be with the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. Working principle: Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Reason for not controlling the rear wheels: Controlling the rear wheels with the steering wheel is very unstable, especially the stability of single rear-wheel steering is extremely poor, making it difficult to control at high speeds.
5
0
Share

Which factory produces the Lutailai tires?

Lutailai tires are produced by Shandong Yongsheng, an established tire manufacturer founded in 1986. Lutailai tires use Bridgestone rubber compound, which is of excellent quality. More details are as follows: Tire definition: Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. Typically installed on metal rims, they support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. Usage conditions: Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during use. Therefore, they must possess high load-bearing capacity, traction performance, and shock absorption. Additionally, they require high wear resistance, flex resistance, and low rolling resistance with minimal heat generation. Automotive tires can be categorized into passenger car tires and truck tires based on their application.
10
0
Share

What to Do When a Vehicle Battery Leaks?

Vehicle battery leakage can be handled as follows: 1. Check if the battery casing is cracked, identify the acid leakage spot, and use plastic welding to repair it; 2. Remove the panel and inspect the safety valve for any signs of leakage. If found, the safety valve needs to be repaired or replaced; 3. Pressurize and inflate in water to check for bubbles. If bubbles appear, it indicates leakage; if not, it means the battery is normal. A car battery, also known as a storage battery, works by converting chemical energy into electrical energy. Batteries are categorized into conventional lead-acid batteries, dry-charged batteries, and maintenance-free batteries. Typically, the term 'battery' refers to lead-acid batteries. The normal service life of a car battery ranges from 1 to 8 years, depending largely on the vehicle's condition.
15
5
Share

What are the reasons for the high fuel consumption of the BMW X1?

BMW X1 high fuel consumption reasons are as follows: 1. Incorrect driving techniques: Drivers who prefer sudden acceleration, frequently brake, or have poor driving anticipation will definitely consume more fuel. Those who never exceed 2500 RPM while driving tend to be more fuel-efficient. 2. Vehicle condition: Neglecting vehicle maintenance, such as underinflated tires, uncleaned throttle valves, and dirty air filters with excessive carbon buildup, can lead to higher fuel consumption. Some drivers don't even know how to add water when the engine is low on coolant. New cars that haven't been properly broken in or vehicles over 10 years old with significant wear and tear are also relatively more fuel-consuming. 3. Road conditions: Driving on wide, open roads is certainly more fuel-efficient than driving on rural dirt roads. Frequent highway driving is also more fuel-efficient compared to frequent city driving.
9
5
Share

Is Chebu Three-Way Catalytic Cleaner Effective?

Three-way cleaner is useful. Here is the relevant introduction: Three-way catalyst: The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system. Regular cleaning of the three-way catalytic converter not only helps improve the performance of the vehicle engine but also reduces frequent alarms from the exhaust system oxygen sensor. It is particularly suitable for closed-loop fuel injection vehicles. Vehicles with good driving habits can be cleaned every 10,000 to 20,000 kilometers. Principle: When a car operates at low temperatures for a long time, the three-way catalytic converter cannot activate, and the carbon smoke discharged by the engine will adhere to the surface of the catalyst, preventing contact with CO and HC. Over time, this can clog the pores of the carrier, affecting its conversion efficiency. Moreover, if the exhaust emission is not smooth, the engine's power cannot be fully utilized, which is why many cars cannot accelerate at high speeds.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.