What are the tire model specifications for the Kia K4?

What are the hidden features of the 2021 CR-V?

The hidden features of the 2021 CR-V are as follows: 1. Press the lock or unlock button on the remote control, and all doors and the tailgate will lock or unlock. If no door is opened within 30 seconds after unlocking with the remote transmitter, the doors will automatically relock. 2. When the doors are locked or unlocked, all exterior turn signals and two indicator lights on the dashboard will flash. 3. Insert and turn the key fully to lock the doors. Related information is as follows: 1. The 2021 CR-V is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 193, a maximum power of 142 kW, and a maximum torque of 243 Nm, paired with a 6-speed manual transmission. 2. The 2021 CR-V uses a MacPherson independent suspension for the front suspension and a multi-link independent suspension for the rear suspension.

7

4

Share

How to deal with water entering the car through an open window without causing standing water?

If water enters your car through an open window but does not accumulate, follow these steps: 1. First, remove any water inside the car and dry the wet areas. 2. Open the car doors for ventilation and spread moisture-absorbing beads inside the car to continue absorbing water. If these are unavailable, you can use newspaper or rice as substitutes. 3. If you have a wet/dry vacuum or a dryer, it’s even better, as they can quickly remove moisture from the car. 4. After the car has dried, test all electronic devices to ensure they are functioning properly. If any malfunction or short circuit is detected, promptly visit a 4S shop or auto repair shop for repairs. Important notes: 1. Wet seats may develop mold. Avoid using a hot air blower to dry them. If your car has seat heating, you can use this function to speed up evaporation. After air-drying, apply a leather polish cleaner. For sponge seats, you can remove the entire seat and air-dry the sponge inside. 2. Do not fully soak and scrub the car mats in water, as this can damage the adhesive between the different material layers inside the mats and may cause them to remain damp for a long time, affecting their performance and increasing interior humidity.

19

3

Share

What is the Key to Assessing Damage After a Vehicle is Flooded?

The key to assessing damage after a vehicle is flooded is whether a secondary start-up was attempted, because according to insurance regulations, if the engine is damaged due to a secondary start-up, the insurance company may refuse to cover the claim. Here is a detailed introduction to the insurance claim situation for water-damaged vehicles: If a vehicle is parked and gets flooded, the insurance company will fully compensate if the vehicle has comprehensive insurance. If a vehicle is flooded while driving, this involves whether the vehicle has flood insurance or comprehensive insurance. If insured, the insurance company will fully compensate. If a vehicle is flooded while driving and there is a secondary ignition after the engine stalls, it is not covered by insurance. If the vehicle does not have comprehensive insurance, the insurance company will not provide compensation, and the owner will need to pay for repairs after the vehicle is flooded.

5

4

Share

What are the three scenarios of half-turn reversal in right reverse parking?

"There are three scenarios where you don't need to straighten the wheel during a half-turn reversal in right reverse parking: when seeing the right corner of the garage entrance to straighten, and when the right rear wheel enters the garage. When reversing, you need to engage the reverse gear and slowly back up. When the lower edge of the left rearview mirror aligns with the control line, quickly turn the steering wheel fully to the right. The key to the half-turn reversal in reverse parking lies in observing the right rearview mirror. When the car body covers the middle dashed line in front of the garage, turn the steering wheel half a turn to the left. First scenario: No need to straighten, keep turning fully right to enter the garage, then straighten the wheel when the car body is aligned. Second scenario: After seeing the right corner of the garage entrance and straightening the wheel, maintain the direction until the right rear wheel enters the garage (i.e., the bumper enters the garage, which is considered entering as long as it's within the garage entrance), then quickly turn fully right and straighten the wheel when the car body is aligned. Third scenario: Similarly, maintain the direction until the right rear wheel enters the garage (i.e., the bumper enters the garage, which is considered entering as long as it's within the garage entrance), then quickly turn fully right and straighten the wheel when the car body is aligned."

9

5

Share

What is the total loss standard for water-damaged vehicles?

Water-damaged vehicles are deemed a total loss when the vehicle is completely destroyed and cannot be repaired, or the cost of repair reaches or exceeds the actual value of the vehicle. Below is relevant information about total loss of vehicles: Actual Total Loss: This refers to the vehicle being completely destroyed and beyond repair. Constructive Total Loss: Although the vehicle can still be repaired, the cost of repair reaches or exceeds the actual value of the vehicle, making the repair neither valuable nor necessary. Therefore, it can be treated as a total loss. 3. Total Loss Calculation Formula: Total Loss Amount = [New Vehicle Purchase Price at the Time of Incident - Market Price of Intact New Parts] × (1 - Depreciation Period × Depreciation Rate) - Residual Value.

4

0

Share

What Causes the Squealing Noise in a Newly Replaced Belt?

Newly replaced belts may produce a squealing noise due to the presence of metal, stones, or other impurities on the friction surface, or because the belt tension is inappropriate. Reasons for Replacement: To ensure the normal operation of the engine and extend its service life, reliable and regular maintenance is essential. For ordinary vehicles, the engine belt should be replaced after one and a half to two years of use. If the mileage reaches 60,000 kilometers, replacement is necessary. Hazards of Belt Breakage: If the belt breaks while driving, it poses a significant safety risk. In such cases, the owner cannot replace the belt themselves and must rely on a repair shop. Considering various factors, replacement is recommended when the total mileage reaches 80,000 kilometers. Solutions for Belt Noise: If the belt makes unusual noises, first check the assembly. The noise may be caused by friction between the timing belt and the timing cover. Loosening the screws on the timing cover by half a turn can help determine if the noise disappears. Additionally, inspect the condition of the generator belt. If the noise comes from the accessory belt, it might be due to the timing belt being adjusted too tightly. Removing the generator and air conditioning power steering belts can help identify if the issue lies with these belts.

1

4

Share

What are the tire model specifications for the Kia K4?

What are the hidden features of the 2021 CR-V?

How to deal with water entering the car through an open window without causing standing water?

What is the Key to Assessing Damage After a Vehicle is Flooded?

What are the three scenarios of half-turn reversal in right reverse parking?

What is the total loss standard for water-damaged vehicles?

What Causes the Squealing Noise in a Newly Replaced Belt?

Should Automatic Transmission Cars Shift to Neutral at Traffic Lights?

How to Start an Automatic Car?

What does the ECO indicator on the car mean?

What to Do If Driving License Renewal Is Overdue?