···
Log in / Register

What are the tips for winter tire maintenance?

4 Answers
LaMichael
07/30/25 2:20am

Tips for winter tire maintenance include: 1. Use an appropriate tire pressure gauge to check the tires frequently under cold conditions, at least once a month; 2. Maintain the tire pressure at the recommended level, as the vehicle's placard provides the suggested tire pressure levels. Keeping the proper tire pressure is an important way to extend tire life and durability; 3. Regularly visit a 4S shop for professional inspections to understand the tire wear and performance status, so any issues can be detected promptly; 4. After the vehicle is parked, wait for the tires to cool down before inflating them. Pay attention to cleanliness during inflation, and ensure the air being filled does not contain moisture or oil to prevent rubber deterioration and damage inside the tire; 5. If high tire temperature or pressure is noticed during normal driving, avoid splashing water and simply park in a shaded area.

Was this review help?
15
1
Share
BrandonLee
08/15/25 8:27am

I think the most important aspect of winter tire maintenance is maintaining proper tire pressure, as cold weather can cause it to drop. Insufficient tire pressure reduces traction and increases the risk of skidding. During routine checks, you can use a tire pressure gauge to measure it—vehicle manuals usually provide recommended values, and checking once a month is generally sufficient. Tread depth is also crucial; I always keep an eye out for excessive wear since shallow treads can lead to poor braking on snow or ice. Additionally, frequent winter driving can cause tires to freeze and deform, so avoid parking on snow piles or in standing water. Applying a rubber protectant to the surface helps prevent cracking. If temperatures drop well below freezing, I consider switching to winter-specific or all-season tires, which are more durable. Regular tire rotation to ensure even wear is also important—I rotate them every 5,000 kilometers. These small tips help reduce accident risks and ensure safer family trips.

Was this review help?
19
0
Share
Expand All
CorbinRose
10/21/25 5:45am

To save money on car maintenance, I have some winter tire care tips to share. First, adjust the tire pressure correctly—cold weather causes pressure to drop, and low pressure leads to faster tire wear and higher fuel consumption. I regularly check it with a portable pressure gauge to ensure it stays within the recommended range. Don’t skip inspecting tread depth; replace tires early if they’re excessively worn to avoid costly blowouts. Storage is crucial: clean tires thoroughly before parking to remove mud and dirt, then use stands to prevent deformation and oxidation, covering them with cloth to block dust. Rotating tire positions also extends their lifespan—I do it myself every quarter. When choosing winter tires, mid-range brands offer sufficient durability without the high cost. These simple maintenance steps have saved me a lot, and my tires last 3-5 years without issues.

Was this review help?
5
0
Share
Expand All
GageFitz
12/04/25 6:13am

As a daily driver, I focus on key points for winter tire maintenance. Always check tire pressure when cold, a simple tool test will do. Tread depth must be sufficient to prevent slipping on snow. Inspect for wear before driving, address cracks promptly. Store in a dry, cool place, avoid sunlight or damp areas. Regular rotation helps ensure even wear. Simple habits ensure safety and convenience.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

How long does it take for a car battery to fully charge after starting?

If the battery is in good condition, driving for about 20 minutes after starting can fully charge the battery. Here is some relevant information about car batteries: 1. Introduction: A car battery refers to a rechargeable battery that can be reused after discharging. Types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries. In a lead-acid battery, the positive electrode is lead dioxide, the negative electrode is lead, and the electrolyte is a dilute sulfuric acid solution. During discharge (use), the positive and negative electrodes react with sulfuric acid to form lead sulfate. When the concentration of the sulfuric acid solution drops to a certain level, the battery must be recharged. Using an external power source for charging can restore the electrodes and solution to their original state, allowing the battery to be reused after charging. 2. Classification: Ordinary batteries, dry-charged batteries, and maintenance-free batteries.
4
4
Share

Does enabling hidden car features affect the vehicle?

Enabling hidden car features not only increases fuel consumption but also reduces engine lifespan. Below are relevant details about enabling hidden car features: 1. Definition: Enabling hidden features refers to ECU remapping, also known as ECU upgrading, which involves rewriting programs and optimizing parameter settings to achieve effects such as increased horsepower, enhanced torque, or reduced fuel consumption. 2. Consequences: During the warranty period, authorized dealerships (4S shops) will not provide warranty coverage; additionally, vehicles with modified engine control units may experience significantly reduced resale value and accelerated aging. If the modification is performed to enhance power output, it will not only increase fuel consumption but also shorten the engine's service life.
20
4
Share

What is the passing score for C1 driving test subject 2?

The passing score for the C1 driving license subject 2 test is 80 points. The C1 subject 2 test mainly consists of five items: reversing into a garage, parallel parking, curve driving, right-angle turning, and hill start and stop. For automatic transmission (C2) subject 2, the hill start and stop is not tested. A C1 driving license allows the holder to drive small and micro passenger vehicles. C1 driving test consists of four subjects, the other subjects are as follows: Subject 1: Mainly tests basic knowledge of road traffic; Subject 3: Mainly tests 16 driving skills including preparation before starting, starting, and driving straight; Subject 4: Mainly tests the requirements for safe and civilized driving operations, similar to subject 1, it is a theoretical test. Subject 2 test tips: During the subject 2 test, before driving, adjust the seat height, adjust the rearview mirror to ensure a wide field of vision, and fasten the seat belt. During the test, do not stop unless the voice prompt indicates failure. For parallel parking, remember to find the correct angle, turn the steering wheel quickly, react promptly, and coordinate with the car's speed. For hill start, remember to pull the handbrake, turn on the left turn signal when starting, release the handbrake, stabilize the clutch, and gradually release the clutch while stepping on the accelerator to avoid stalling or rolling back. For right-angle turning, find the reference point before turning and coordinate with the car's speed. For curve driving (S-curve), slow down and drive carefully. For reversing into a garage, control the speed, find the reference point, and make minor adjustments if the rearview mirror shows any deviation. Subject 2 deduction items: Reversing into a garage: Vehicle body out of line, deduct 100 points, judged as failure; failure to reverse into the garage, deduct 100 points, judged as failure; stopping midway, deduct 5 points each time; failure to complete the test within the specified time, deduct 100 points, judged as failure. Parallel parking: Vehicle body out of line after stopping in the garage, deduct 100 points, judged as failure; stopping midway, deduct 5 points each time; tires or vehicle body touching the curb line while driving, deduct 10 points; failure to complete the test within the specified time, deduct 100 points, judged as failure. Curve driving: Wheels touching the road edge line, judged as failure; stopping midway, judged as failure; driving gear not in second gear or above, deduct 5 points. Right-angle turning: Wheels touching the road edge line, judged as failure; stopping midway, deduct 5 points each time. Hill start and stop: After the vehicle stops, if the front bumper or motorcycle front axle is not aligned with the pole line and exceeds 50cm, judged as failure; exceeding the specified start time, judged as failure; after the vehicle stops, if the front bumper or motorcycle front axle is not aligned with the pole line but does not exceed 50cm, deduct 10 points; after the vehicle stops, if the body is more than 30cm but less than 50cm from the road edge line, deduct 10 points. Failure to tighten the parking brake after stopping, deduct 10 points. C1 driving test passing standards: Traffic laws and related knowledge – 90 points to pass. Field driving – 80 points to pass. Road driving – 80 points to pass. Safe and civilized driving knowledge – 90 points to pass.
15
3
Share

What Causes Insufficient Power in a Turbocharged Engine?

Insufficient power in a turbocharged engine may be caused by inadequate air tightness of the boost pump leading to air leakage, or leaks in the intake pipeline. Below is relevant information about turbocharged engines: 1. Working Principle: The full name of turbocharging is exhaust gas turbocharging, generally denoted by "T". Turbocharging is a device that uses high-speed gases from the exhaust pipe to drive the rotor's rotation, thereby increasing the airflow pressure in the intake pipe. Increasing the airflow pressure allows more air, meaning more oxygen, to enter the cylinder, resulting in more complete combustion and greater power. 2. Function of the Turbocharger: The turbocharger utilizes the speed of high-speed exhaust gases, enabling the turbocharger rotor to achieve very high rotational speeds, with maximum speeds even reaching around 150,000 rpm.
8
5
Share

Why Does a Car's Engine Sound Louder in Winter?

In winter, the engine often operates with a larger throttle opening to reach its optimal working temperature and power various equipment, which results in increased engine noise. Once the equipment is running normally and the engine reaches its standard temperature, the throttle opening reduces, leading to a decrease in noise. Models equipped with turbocharged engines tend to produce even louder noises during cold starts. Below is an introduction to engine operation: 1. Starting: After a car has been parked for an extended period, the engine oil flows back to the oil pan at the bottom of the engine. Therefore, when starting the engine after prolonged disuse (such as overnight), the upper part of the engine is initially without oil and lacks lubrication. It takes approximately 30 seconds after starting for the oil pump to circulate oil to critical lubrication points such as the pistons, connecting rods, and crankshaft. However, even if you start driving immediately after ignition, as long as you avoid aggressive acceleration and maintain low-speed operation, the effect is similar to idling. 2. Precautions: It is advisable to allow the vehicle to warm up sufficiently for 2-5 minutes while stationary, avoiding aggressive driving during this period to prevent engine damage. Once the coolant temperature rises to the normal range, both the engine speed and noise will naturally return to normal levels.
14
2
Share

How to Reverse into the Garage in Subject 2?

Here is the relevant introduction on how to reverse into the garage in Subject 2: 1. Keep an eye on the rearview mirrors: When reversing into the garage in Subject 2, always keep an eye on the left and right rearview mirrors. If you notice one side is wider, slightly turn the steering wheel in that direction to prevent the other side from crossing the line. Also, when initially determining the timing to fully turn the steering wheel, make sure to turn it decisively without hesitation. 2. Maintain distance: During the process of fully turning the steering wheel and reversing, the rear of the car gradually enters the garage. Just before entering, the wheels should maintain a distance of 30cm from the garage corner. Students should constantly observe through the rearview mirrors and make corrections if the distance is less than or greater than 30cm, otherwise, the line will definitely be crossed after entering the garage.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.