···
Log in / Register

What are the tips for using the S gear in Volkswagen Lavida?

3 Answers
StAlina
07/29/25 6:48pm
Volkswagen Lavida S gear usage tips are: 1. When the car needs to overtake or climb a slope, you can shift into this gear. The S gear can increase the engine load, delay the shifting action, and obtain greater power in a short time, making it easier to overtake or climb a slope; 2. In S gear, the car's RPM is higher, the fuel injection volume of the engine injector will also increase, and fuel consumption will rise. This gear should not be used during vehicle startup, cruise control, or coasting; 3. If driving in very congested road sections, engine carbon deposits will increase, and the S gear can be used appropriately. The Volkswagen Lavida (LAVIDA) is Shanghai Volkswagen's first independently developed A-class car, with model dimensions of 4605mm in length, 1765mm in width, and 1460mm in height.
Was this review help?
15
2
Share
Thompson
08/14/25 12:23pm
When driving my Volkswagen Lavida, the most exhilarating moments using the S-gear sport mode are during overtaking or climbing steep slopes. It delays gear shifts, allowing the engine to rev higher, delivering more aggressive power output and a particularly punchy acceleration feel. Once on the highway when I wanted to overtake, I switched to S-gear, and the response was noticeably quicker than in D-gear, instantly boosting speed. However, avoid prolonged use as it can increase fuel consumption and engine wear—I typically switch back to D-gear after just a few minutes. Additionally, on wet, rainy, or muddy roads, S-gear provides more stable power, reducing wheel spin. It’s also handy for occasional quick starts at traffic lights. This feature is great for sudden needs but isn’t recommended for beginners to experiment with recklessly to avoid losing control. Remember, the S-gear button in the Volkswagen Lavida is next to the gear lever—just a light flick. Once you get used to it, driving becomes more thrilling. Overall, it’s a practical assist, not an everyday mode. Overuse wastes fuel, so smart switching is key.
Was this review help?
20
0
Share
Expand All
DelCollin
10/14/25 8:17am
When driving the Volkswagen Lavida, I find the S mode helps with fuel efficiency to some extent. In slow-moving traffic, switching to S mode makes the engine more responsive, avoiding jerks from frequent gear shifts and providing smoother acceleration when briefly speeding up, which reduces overall energy consumption. For instance, on congested city ring roads, using S mode for quick lane changes ensures steady power output and minimizes sudden braking. However, the key is not to overuse it—switch back to D mode after a few minutes, as S mode increases RPM and fuel consumption, especially harmful for long-distance driving. I once tested continuous S mode for 20 minutes, and fuel consumption rose from 7L to 9L per 100km. Additionally, based on automatic transmission habits, stick to D mode on flat roads and only engage S mode for sudden power bursts. A reminder for beginners: Excessive S mode usage can damage the transmission. Regular vehicle checks ensure safety and cost savings.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How Often Should Internal Engine Cleaning Be Performed?

Engine internal cleaning is generally recommended every six months. Below is relevant information about internal cleaning: Drip Bottle Cleaning Method: Currently, the engine cleaning method adopted by 4S shops is commonly known as the "drip bottle" non-disassembly approach. During cleaning, you only need to inject the cleaning agent into the engine and then use a circulation machine to remove carbon deposits and other debris. This method not only effectively eliminates gum, sludge, deposits, and other contaminants inside the engine but also thoroughly cleans the components of the engine lubrication system, preventing damage from acidic substances and metal shavings. Most importantly, it ensures the optimal performance of the lubricating oil and reduces secondary contamination of new lubricating oil. This is because the engine operates in a high-temperature and high-pressure environment, where engine oil and gasoline inevitably generate carbon deposits and gum over time. Prolonged accumulation of these harmful substances can impair oil fluidity and engine combustion conditions, accelerating engine wear. Generally, engine internal cleaning should be performed every 20,000 kilometers as follows: You can use an engine cleaning agent by pouring it into the oil filler port, running the engine for about 5 minutes, and then draining the oil. If the engine is particularly dirty, first drain the oil, add diesel fuel, disconnect the high-voltage line, and use the starter motor to circulate the mixture for about 2 minutes (avoid exceeding this time to prevent damage to the engine oil seals). Alternatively, you can visit an auto detailing shop for professional cleaning, though labor costs may be higher.
3
3
Share

How much fuel does one bar on the Honda Vezel fuel gauge represent?

One bar on the Honda Vezel fuel gauge represents 2 to 3 liters of fuel. Related information about vehicle fuel consumption is as follows: Methods to reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed; apply gentle acceleration and braking, and brake early; maintain tire pressure at the manufacturer-recommended level, and regularly organize the trunk. Precautions for fuel consumption: Plan your route before driving, check traffic conditions, and try to avoid roads prone to congestion; maintain a steady speed while driving; unstable driving speeds can increase fuel consumption by approximately 6% in suburban areas and 2% in urban areas; avoid carrying unnecessary items in the car to reduce vehicle weight.
5
2
Share

Is the Prado the same as the BaDao?

Prado is the BaDao, which is a mid-to-large-sized SUV. Its body dimensions are: length 4840mm, width 1885mm, height 1890mm, wheelbase 2790mm, front track 1585mm, rear track 1585mm, fuel tank capacity 87L, and body weight 2285kg. The Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280PS, maximum torque of 365Nm, and maximum power of 206kW, paired with a 6-speed automatic transmission.
15
1
Share

What is the method to modify a car's odometer?

The method to modify a car's odometer is: 1. Unplug the odometer sensor connector under the car's hood; 2. Insert the output plug of the mileage adjuster into the sensor's signal port; 3. Plug the mileage adjuster into the cigarette lighter; 4. Turn the car key to start the dashboard and adjust the settings on the mileage adjuster; 5. Adjust the speed as needed. The function of the car odometer is to record the total kilometers driven since the car left the factory. Its working principle is based on knowing the diameter of the car's wheels. By calculating the circumference of the wheel, the number of rotations needed to cover one kilometer can be determined. The odometer automatically records the number of wheel rotations and divides it by the rotations corresponding to one kilometer to obtain the total mileage.
7
3
Share

What transmission does the ix25 use?

ix25 uses a 6-speed manual transmission and a CVT transmission. Taking the 2020 manual fashion ix25 as an example, its body length, width and height are: 4300mm, 1790mm, 1620mm, the wheelbase is 2610mm, the fuel tank capacity is 50l, and the body weight is 1150kg. The 2020 manual fashion ix25 is a MacPherson independent suspension, the rear suspension is a torsion beam non-independent suspension, equipped with a 1.5t naturally aspirated engine, the maximum horsepower is 115ps, the maximum power is 84.4kw, the maximum torque is 143.8nm, matched with a 6-speed manual transmission.
16
2
Share

What is the low ash engine oil designation?

Low ash engine oil is designated as API SP grade. The functions and usage precautions of engine oil are as follows: Functions of engine oil: Separate the relatively sliding parts to reduce wear, bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine; circulate carbon deposits, sludge, and worn metal particles on engine parts back to the oil tank, and flush away dirt generated on the working surfaces of parts through the flow of lubricating oil. Precautions for using engine oil: The selection of engine oil should be based on the requirements of the engine, and the oil should match the engine. Multi-grade oil should be selected as it has advantages such as fuel economy, long service life, and high efficiency, providing better protection for the engine; when refueling, the oil quantity should be slightly lower than the scale on the dipstick, and do not overfill.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.