What are the tips for the Subject 2 driving test?

2 Answers
LawsonLynn
07/29/25 6:38am
Driving test Subject 2 tips from 58 Auto: Keep the speed slow, stay calm, etc. Below are the tips for the Subject 2 driving test: 1. Slow speed: Maintaining a slow speed is the most fundamental rule for Subject 2 practice. Ensure the vehicle doesn't stall while keeping the speed as slow as possible—the slower, the better. A slow speed allows ample time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, always adjust the rearview mirrors properly. This is especially crucial for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to accurately identify and observe these points to ensure precision. 4. Pay attention to the four corners of the car: The front corner is prone to crossing the outer line during reverse parking, while the rear corner may cross the side lines of the parking space. The front corner is likely to go out of bounds during curve driving and right-angle turns. For parallel parking, the front corner may cross the outer line or the left front corner of the parking space, and the right rear corner may cross the right parking space line. Therefore, always monitor the four corners relative to the outer lines.
Was this review help?
17
3
Share
Mackenzie
08/12/25 10:02am
When I took the driving test (Subject 2) for the first time, I found it quite challenging. For reverse parking into the garage, you need to align the reference points accurately—practice multiple times to develop a feel for it. The key to hill starts lies in coordinating the clutch and throttle—gently press the accelerator when the clutch is released to the point where the car vibrates. For parallel parking, steer quickly and precisely to avoid crossing the lines. When making a 90-degree turn, remember to turn the steering wheel in advance and enter only when the car body is properly aligned. I realized that familiarizing yourself with the test route beforehand is crucial—memorize reference points during practice, such as the position of line corners in the rearview mirror when reversing into the garage. Keep your body relaxed, avoid stiffness, adjust the seat to a comfortable position, and ensure the rearview mirrors offer a clear view. On the test day, have a proper breakfast—don’t operate the car on an empty stomach. Stay calm and treat it like a regular practice session.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What is the process of vehicle inspection?

The process of vehicle inspection is: 1. Prepare the required materials for vehicle inspection, such as the vehicle license, ID cards and copies of the owner and the agent. 2. Conduct an exterior inspection of the vehicle upon arrival at the inspection site. 3. Pay the inspection fee and input the information. 4. Conduct the online inspection. 5. Perform a final review. 6. After passing the review, the relevant personnel will issue the annual inspection sticker to the owner. The inspection cycle varies depending on the vehicle type: 1. For small and mini non-operational passenger vehicles, inspect every 2 years within the first 6 years, annually after exceeding 6 years, and every 6 months after exceeding 15 years. 2. For operational passenger vehicles, inspect annually within the first 5 years and every 6 months after exceeding 5 years. 3. For trucks and large and medium-sized non-operational passenger vehicles, inspect annually within the first 10 years.
19
2
Share

How to Determine the Position of the Right Front of the Car While Driving?

How to determine the position of the right front of the car while driving is as follows: 1. Front parking. When the line of sight cannot see the part where the obstacle touches the ground, the distance between the front of the car and the obstacle is about 50 cm to 80 cm. 2. Reverse parking. If there are other vehicles parked around, if there is one similar in length to your vehicle, aligning the front door handles of the adjacent vehicle is generally fine; otherwise, adjust and stop appropriately by comparison. When there are no other vehicles around for reference, first use the interior rearview mirror. When the trunk line in the rearview mirror exceeds the contact point of the obstacle with the ground, the car is about 1 m to 1.3 m away from the obstacle. Then adjust the distance appropriately.
3
3
Share

How to Deal with the Illuminated ABS Light?

When the ABS light is illuminated, it indicates a fault in the ABS system (usually a damaged sensor), which prevents it from functioning normally. However, it does not affect normal braking, and you can continue driving. Here are the solutions and additional information: 1. Schedule a visit to a 4S shop or a professional auto repair shop for maintenance. It's important to note that in extreme conditions (such as high-speed driving or icy roads), sudden braking may cause the wheels to lock up. 2. Lock-up refers to a situation where, during braking, the tires stop rotating completely after a single brake application. This can easily lead to loss of vehicle control and cause traffic accidents or other hazards. The Anti-lock Braking System, abbreviated as ABS, functions by automatically controlling the braking force during vehicle braking to prevent wheel lock-up, keeping the wheels in a state of rolling and sliding (with a slip ratio of about 20%), ensuring maximum traction between the tires and the road surface.
18
2
Share

What are the reasons for the rapid consumption of coolant in the new Changan CS75?

The reasons for the rapid consumption of coolant in the new Changan CS75 are as follows: 1. Reason one: Radiator damage, poor sealing of the upper and lower water chambers leading to coolant leakage; 2. Reason two: Overflow tank, water pump joint surface, and loose connections in the cooling system pipes causing coolant leakage; Rubber-metal pipe joints frequently exposed to high temperatures may age due to thermal expansion and contraction, leading to small gaps through which coolant can leak. 3. Reason three: Damage to the cylinder head gasket, excessive flatness deviation or warping of the joint surface between the cylinder head and cylinder block, and loose cylinder head fastening bolts, allowing high-temperature and high-pressure gas from the cylinder to enter the cooling system, resulting in rapid coolant consumption.
10
2
Share

Can the Three-Way Catalytic Converter Be Repaired?

If the three-way catalytic converter is damaged, such as broken or deformed, it cannot be repaired and must be replaced directly. If it is only clogged, its performance can be restored by cleaning, but if the clogging is severe, replacement is still necessary. More relevant information is as follows: 1. The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system. It converts harmful gases such as CO, HC, and NOx emitted by automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 2. When high-temperature automobile exhaust passes through the purification device, the purifying agent in the three-way catalytic converter enhances the activity of CO, HC, and NOx, promoting certain oxidation-reduction chemical reactions. Among them, CO is oxidized at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds are oxidized into water (H2O) and carbon dioxide at high temperatures; and NOx is reduced into nitrogen and oxygen. The three harmful gases are transformed into harmless gases, thereby purifying the automobile exhaust.
5
3
Share

Where is the interior unlock button located in the BMW 730?

The interior unlock button of the BMW 730 is located in the center position between the two air vents on the car's central control panel. The BMW 730 belongs to the BMW 7 Series. Below is a detailed introduction about the BMW 7 Series: 1. Overview: The BMW 7 Series is BMW's top-tier luxury sedan series, featuring a 4-door sedan body style and front-engine, rear-wheel drive configuration. The BMW 7 Series is the flagship model of BMW automobiles, exclusively produced in Germany, and replaced the previous-generation BMW New Six in 1977. 2. Other specifications: The vehicle dimensions are 5212mm*1902mm*1478mm, with a fuel tank capacity of 82L. It has a standard seating capacity of 5. The top speed is 245km/h, and the seats are made of genuine leather. The acceleration time ranges from 4.6 to 8.3 seconds (0-100km/h), and it features ventilated disc brakes.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.