···
Log in / Register

What are the tips for the manual transmission subject one exam?

6Answers
MacAniyah
07/29/2025, 07:43:58 PM

Tips for the manual transmission subject one exam: True or False Questions: In true or false questions, those containing "quickly," "emergency braking," or "sharp turn" are all incorrect. Multiple Choice Questions: In multiple choice questions, those containing "slow down and yield," "stop and yield," "bear civil liability," "slow down and avoid," "stop and avoid," "hold the steering wheel with both hands," "use engine braking to slow down," or "gear snatching" are all correct. Additionally, those with "confirm safety" are correct, while those with "does not belong to" are incorrect. Highway: The minimum speed on the highway is 60 km/h, and the maximum does not exceed 120 km/h. If there are two lanes in the same direction, the speed range for the right lane is 60-100 km/h, and the left lane is 100-120 km/h. If there are three lanes in the same direction, the speed range for the far-right lane is 60-90 km/h, the middle lane is 90-110 km/h, and the far-left lane is 110-120 km/h. Overtaking must always be done from the left.

Was this review help?
117
Share
LeBentley
08/15/2025, 10:58:47 PM

It took me three attempts to realize the trick to passing the written driving test: practice makes perfect! I slacked off and just skimmed through the material the first two times, which led to failure. The third time, I buckled down and used the driving test app to go through all 1,600 questions three times. Every time I got a question wrong, I took a screenshot and reviewed my mistakes at night. I also found traffic hand signals surprisingly easy to remember—if the officer extends their left arm, it means slow down and prepare to turn left. On exam day, I instantly recognized over 20 identical questions and aced them, scoring 98 in the end. Remember, relentless practice plus a mistake log beats any shortcut.

Was this review help?
17
Share
Expand All
LukeMarie
10/18/2025, 11:45:47 PM

Having trained hundreds of students, I suggest you first understand the regulations before practicing questions. The subject one question bank is divided into sections like traffic signs, hand signals, and light usage. Remember the red-circle prohibition signs clearly, and don't confuse the yellow-triangle warning signs. The police hand signals are most frequently tested: an extended arm indicates direction, and a single-handed swing means yield. For light questions, remember to turn on front and rear fog lights plus hazard lights in foggy weather. I require students to do categorized practice, using mnemonics for key points like 'speeding over 50% deducts 12 points,' and only sign up after scoring 95 or above three times in a row in mock exams.

Was this review help?
17
Share
Expand All
LaKai
12/01/2025, 11:21:38 PM

As someone who passed the test by cramming with 'Driving School YDT' for two days, here are my tips: For graphic questions, focus on colors and shapes—blue background with white arrows indicate directional signs, red circles with bars are prohibition signs. For numerical questions, remember the key points: 30 km/h in urban areas without a central line, 50 km/h on roads with a central line. In foggy conditions with visibility under 50 meters, speed should not exceed 20 km/h. The app's favorite feature is super handy—I marked 200 tricky questions with stars and reviewed them repeatedly. Simulate the exam three times a day, and you can consistently score 90 within three days.

Was this review help?
6
Share
Expand All
TaliaLee
01/22/2026, 12:45:19 AM

Having just passed the subject one test last week, I realized the focus was on signs and gestures: a red circle with a diagonal slash indicates a prohibition sign, and a police officer raising one hand means stop. For lighting operations, the frequently tested scenario is turning on both front and rear fog lights along with hazard lights in foggy conditions. For penalty point questions, I used the categorization method—covering the license plate directly results in 12 points, while running a red light is 6 points. During the exam, don’t panic; leave the uncertain questions for last, as the 150-second time limit is more than enough. During practice, I often confused 'no parking' with 'no entry,' but later I specifically took photos of roadside signs to compare and memorize them, which helped me distinguish them clearly.

Was this review help?
14
Share
Expand All
LoganLynn
04/18/2026, 12:42:22 AM

As a working professional, I studied for the written driving test during my subway commute and passed the first exam. I used an app for targeted practice during my commute: Mondays for road signs, Tuesdays for hand signals, tackling one module each day. The most challenging part was distinguishing similar signs: the 'No Entry' sign with a red circle and horizontal bar versus the 'No Thoroughfare' sign with a solid red circle. I listened to traffic regulation audio while cooking to reinforce my memory. In the last three days, I did three mock tests daily, maintaining a score of 95. Before entering the exam room, I took deep breaths and read questions slowly. For traffic police hand signal questions, I mentally reviewed the reference images I had taken on my phone.

Was this review help?
10
Share
Expand All
More Q&A

What Causes the Engine Warning Light to Illuminate in a Jaguar XEL?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or signal interruption occurs, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockages can all result in poor combustion. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Air intake issues may lead to engine pipe blockages, potentially causing the warning light to activate. A dirty or uncleaned air filter can restrict proper airflow. Exhaust system faults: Exhaust problems can trigger the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage this component. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or doesn't properly communicate with the engine control unit, it may prevent normal engine operation while illuminating the warning light. When the engine warning light appears, follow these steps: First check if the engine operates normally - observe for vibrations, black smoke, etc. If present, avoid restarting the engine. Note: Never restart if the light is red. If the engine starts normally, turn off the vehicle for 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The system will perform a self-check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to retrieve trouble codes and perform targeted repairs.
116
Share

Is There Any Impact from Switching from 95 Octane to 92 Octane Fuel Long-Term?

Switching from 95 octane to 92 octane fuel long-term does have an impact. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption, but long-term use of the wrong gasoline grade can lead to the following effects: For vehicles designed for lower octane fuel, using higher octane fuel will not cause damage, but the increase in octane rating alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical experience being poorer performance. For vehicles designed for higher octane fuel, using lower octane fuel can cause engine knocking. Because the octane rating is significantly lower, the reduced ignition point causes premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane fuel, while those with a compression ratio between 10.0-11.5 should use 95 octane fuel. However, with the use of new technologies, the compression ratio alone cannot determine the required gasoline grade. High compression ratio engines can be tuned to use lower octane fuel because other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.
108
Share

What are the hidden functions of the 2011 Teana key?

The hidden functions of the 2011 Teana key include closing the windows after turning off the engine, finding the car in a parking lot, automatically opening the trunk, and remotely opening the windows. Relevant information about the Teana is as follows: 1. Exterior Design: The 2021 Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all models are equipped with 17-inch or larger wheels, LED headlights, and LED daytime running lights. Additionally, the model also launched the Phantom Edition package, which includes blackened rear emblems, chrome front grille trim, wheels, rear spoiler, Midnight personalized rear emblem, and other unique exterior accessories. 2. Interior Design: The 2021 Teana upgrade features piano-black door trim panels, wood-grain center console and gear lever box, and exquisite soft material wrapping to enhance the cabin's luxury feel. Moreover, the Phantom Edition package also includes luxury LED welcome pedals and exclusive floor mats. 3. Powertrain: The 2021 Teana offers a 2.0L naturally aspirated engine and a 2.0T turbocharged engine, paired with the new intelligent XTRONIC-CVT continuously variable transmission equivalent to an 8AT gear range. The 2.0T model is equipped with the VC-TURBO variable compression ratio turbocharged engine, which allows the engine compression ratio to intelligently and continuously switch between 8:1 (high performance) and 14:1 (high efficiency). The 2021 Teana can accelerate from 0 to 100 km/h in just 6.42 seconds, with a minimum fuel consumption of 6.6L per 100 km.
119
Share

Should the car be started when charging a phone inside?

Starting the car is necessary when charging a phone inside. Here are the precautions for starting a car: 1. Check the surroundings of the vehicle: Walk around the car to inspect its exterior and the environment, ensuring there are no obstacles in front or behind the car. Check the ground where the car is parked for any suspicious oil stains or water stains, verify if the front and rear light assemblies are damaged, and ensure the tire pressure is adequate. 2. Inspect the internal condition of the car: Check if the engine oil and coolant levels are sufficient, and if the front and rear lights, signal lights, and dashboard are functioning properly. The main focus is to examine the technical condition inside the car. Lift the engine hood, pull out the dipstick to check if the oil level is normal, and unscrew the radiator cap to verify if the water level is normal.
112
Share

What is the method to reset the maintenance light on Changan Suzuki?

Turn on the ignition switch, briefly press the right-side information display selection handle until the information display screen goes black and then stops. Press and hold the left-side mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button. The display area will show the oil lock. Release the button and press it five times consecutively within 2 seconds, completing the action within 3 seconds. The oil lock will turn off, indicating the operation is complete.
115
Share

Why does the car key not respond when locking the car?

If the car key does not respond when locking the car, it may be due to a malfunction of the remote lock or aging of the remote transmitter antenna in the vehicle, which prevents the remote key from working properly. Another possible cause is strong magnetic signal interference around the car. Here are some precautions for car keys: 1. Do not place it near electronic devices: Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. Frequently placing the smart car key together with a mobile phone can lead to malfunction, as the chip inside the smart key may sometimes be affected by the phone's frequency, temporarily disabling the remote function. Additionally, if the smart key receives high-intensity radio waves, it may excessively drain the battery. Therefore, avoid placing the smart key near electronic devices such as TVs or personal computers. 2. Avoid rough handling: Smart keys are most vulnerable to being dropped from a height. While the outer shell of most smart keys is sturdy, the internal circuitry is less resistant to impact and can easily be damaged by severe collisions. Furthermore, if water enters the smart car key, it can burn out the internal circuitry, also causing remote failure. If the smart car key gets wet, do not shake it vigorously, as this can cause water to spread to other critical circuits. Also, avoid using the remote to unlock the car immediately, as this may damage the circuit board. 3. Use the correct battery: The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency and distance of key usage. Replacing the battery of a smart car key requires caution, as any mistake can damage the circuit board inside the key. Before replacement, the owner should carefully review the battery replacement diagram. When disassembling the key, pay attention to the original positions of all components and try to use an original battery. During installation, ensure the correct orientation of the battery's positive and negative terminals to avoid incorrect placement. Additionally, be careful with the sealing ring at the bottom of the key to prevent damage during replacement, which could otherwise burn out the circuit board.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.