What are the tips for the driving license subject 2 test?

1 Answers
Wyatt
07/30/25 12:49am
Driving test subject 2 tips 58 Keep the car speed as slow as possible, stay calm, etc. Slow speed: The speed must be slow, which is the most fundamental rule for practicing subject 2. Make sure the car doesn't stop, and try to keep the speed as slow as possible. The slower the speed, the more time you have to adjust each operation. Adjust the rearview mirrors: After getting in the car, be sure to adjust the rearview mirrors properly, which is particularly important for reversing into the garage and parallel parking. Master the three-point alignment method: The three points are the driver's eyes, the reference point on the car, and the reference point on the ground. During the operation of subject 2, you must accurately locate the points and observe them properly to ensure precision. Pay attention to the four corners of the car: Before reversing into the garage, the front corner is prone to sweeping the outer line, and the rear corner is prone to sweeping the side lines of the garage; during curve driving, the front corner is prone to crossing the line; during a right-angle turn, the front corner is prone to crossing the line; during parallel parking, the front corner is prone to sweeping the outer line or the left front corner of the garage, and the right rear corner is prone to sweeping the right garage line. Therefore, pay attention to the four corners and the outer lines.
Was this review help?
12
2
Share
More Forum Discussions

How to Replace the Air Filter on a Dongfeng Peugeot 308?

Open the engine hood and locate the air filter housing; gently release the two clips securing the cover; lift the air filter housing cover and remove the old air filter; install the new air filter, replace the cover, and fasten the clips to complete the process. Below is a detailed introduction to the function of the air filter: 1. The air filter, also known as the cabin air filter or pollen filter, serves to purify the air entering the vehicle cabin from the outside, improving air cleanliness. It typically filters out impurities in the air, such as tiny particles, pollen, bacteria, industrial exhaust, and dust. 2. The air filter prevents these substances from entering the air conditioning system, ensuring a good air environment for passengers, protecting their health, and preventing window fogging.
9
5
Share

When reversing, if you turn the steering wheel to the right, does the rear of the car also move to the right?

When reversing, turning the steering wheel to the right will cause the rear of the car to move to the right, and turning it to the left will cause the rear to move to the left. If moving forward, the opposite is true: turning the steering wheel to the left while moving forward will cause the rear to move to the right, and turning it to the right will cause the rear to move to the left. When parking in a parking lot, first estimate the width of the space, check for obstacles behind, whether there are cars parked on either side, and whether the length is suitable for your vehicle. If visibility is poor at night, step out to observe the exact position before reversing. Whenever possible, choose to reverse from the left side (if conditions permit). The left side makes it easier for the driver to observe. During the reversing process, first look behind, then pay attention to the side mirrors. The horizontal distance on the right side should be slightly larger than on the left. Pay attention to both the front and rear when reversing. When reversing into a parking space, this might happen: due to limited surrounding space, reversing while turning may lead to focusing only on the rear of the car and neglecting the front, causing the front side to scrape. This occurs because, during the turning process, the turning radius of the front wheels is larger than that of the rear wheels. As a result, the front of the car swings outward while reversing, leading to a scrape on the front side. Therefore, when reversing, always be mindful of both the front and rear.
5
5
Share

What to Do When the Key is Locked in the Car and How to Open the Trunk?

If your car key is locked inside the car, you can try the following methods: 1. Most cars have a button near the trunk area. As long as the distance between the car key and the trunk is within 1 meter, you can open the door. 2. If you have a spare key, you can use it to open the door. Alternatively, you can contact a professional locksmith. 3. Use a thin rope to unlock the car door's safety switch: Thread a thin rope through the gap of the car door, tie a retractable buckle at the front end, and when the buckle hooks onto the safety switch of the car lock, pull it upward forcefully to unlock the safety switch and open the door.
16
1
Share

Does the 10th-generation Civic have a horn sound when locking the car?

The 10th-generation Civic does have a horn sound when locking the car. Here are the relevant details: 1. To activate the locking horn sound: Use the remote key to enable the locking horn by simultaneously pressing the unlock and lock buttons for 3 seconds. Successful activation is indicated by flashing lights. 2. The horn must not be rigidly mounted; it should be fixed on a cushioned bracket, meaning a leaf spring or rubber pad should be installed between the horn and the mounting bracket. 3. Air horns are mainly used in heavy-duty trucks equipped with air brake systems, while electric horns are widely used in small and medium-sized vehicles due to their simple structure, compact size, lightweight, pleasant sound, and ease of maintenance.
11
5
Share

What do trip A and trip B on the dashboard mean?

The meanings of trip A and trip B on the dashboard are as follows: 1. Trip A and trip B on the dashboard represent the current trip mileage. 2. The trip on the car dashboard refers to the partial mileage, which can be used to record the kilometers traveled for each trip. The one on its left represents the total mileage of the vehicle. 3. Trip A/B specifically refers to the distance from point A to point B. In the trip A state, briefly pressing the cylindrical rod on the dashboard will switch to the trip B state. Pressing the rod briefly again will return to the initial state, which displays the total odometer reading.
10
5
Share

Why are ventilated discs not used for rear wheels?

The reasons why ventilated discs are not used for rear wheels are as follows: 1. The manufacturing cost and material requirements of ventilated discs are higher than those of ordinary brake discs. The braking force distribution for rear brakes is generally only half that of front brakes, and the heat generated by friction is much less compared to front discs. Considering cost and actual performance, manufacturers usually adopt a design with front ventilated discs and rear ordinary discs. 2. Ventilated discs are designed for better heat dissipation. Since the braking force on the rear wheels is smaller, the heat generated is also less compared to the front wheels. 3. The braking effect mainly relies on the front brake discs, while the rear brakes only play a supplementary role. Therefore, there is no need to use high-performance ventilated discs for the rear wheels.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.