···
Log in / Register

What are the tips for the B2 Subject 2 driving test?

4 Answers
LaReid
09/06/25 8:25am

The following are the sixteen tips related to the B2 Subject 2 driving test: 1. Hill start and stop: After hearing the voice prompt for "hill start and stop," drive the vehicle to the designated spot on the slope and stop. After stopping, the distance between the right front and rear wheels of the vehicle and the road edge line (white line) should not exceed 30 cm, and the vehicle should not press against the road edge line (white line). The frontmost part of the vehicle should be within the yellow line on the road. After 3 seconds, you can start and continue the test until the computer voice prompt "ding-dong" indicates the successful completion of this test item. Key points and tips: Rolling backward after starting and stalling during startup are the most common issues in this item, mainly due to the driver's lack of proficiency in coordinating the clutch, parking brake, and accelerator pedal. 2. Parallel parking: Drive the vehicle in front of the parking space. After hearing the voice prompt "parallel parking," begin the parallel parking test. After reversing into the parking space and stopping, wait for about 5 seconds until the voice prompt "ding-dong" signals the start of the next test item. Key points and tips: Stalling during forward or reverse movement and pressing against the line are the most common issues in this item. 3. Bumpy road driving: Drive the vehicle in a low gear. After hearing the voice prompt "ding-dong, bumpy road driving," the bumpy road test item begins. The voice prompt "ding-dong" indicates the end of this item and the start of the next one. Key points and tips: This item tests the driver's ability to coordinate the brake, clutch, and gear to ensure smooth deceleration and acceleration of the vehicle.

Was this review help?
8
3
Share
LeDaniel
09/18/25 7:57am

When I was practicing for the driving test's Subject 2, I spent quite some time on it, and I believe the most important thing is memorizing the reference points. These points are visual markers on the car, such as the position of the rear bumper and the corner of the parking space when reversing into a bay. By aligning these with the side mirrors and turning the steering wheel correctly, you can avoid crossing the lines. Speed control should be steady, and don’t release the clutch too quickly during semi-engagement, especially when starting on a slope, as stalling is common—practice more to get the feel. Simulate real test scenarios during training, familiarize yourself with the sequence of each task, and memorize the reference points for parallel parking and right-angle turns. Stay relaxed mentally, treat it like a regular practice session, and don’t panic over minor mistakes—just keep going. Seat adjustment is crucial, as height affects the accuracy of your reference points. Don’t forget to adjust the mirrors and fasten your seatbelt, and use turn signals in advance for extra points. In short, practice makes perfect—just half an hour of daily practice for a week will get you comfortable.

Was this review help?
12
1
Share
Expand All
DelEloise
11/01/25 8:25am

I was extremely nervous before taking the Subject 2 driving test, but later realized that mindset determines success or failure. Take a few deep breaths to calm down, don't think about the examiner watching, just focus on your own operations. During practice, emphasize mastering reverse parking and parallel parking - be precise with reference points. I took photos of reference points with my phone for review. For hill starts, practice clutch control and balance between throttle and brake - don't stomp on them. Maintain steady speed; going too fast may cause you to miss reference points and lose points. Mock tests were very helpful in familiarizing me with the exam environment and reducing unfamiliarity. During the actual test, pay attention to small details like seat belts and turn signals. If you make a mistake, don't dwell on it - focus on the next item without stopping. Get proper rest to stay alert, bring your documents and arrive early to reduce stress. Don't worry about others, be confident and you'll definitely pass.

Was this review help?
10
4
Share
Expand All
JuliaLee
12/15/25 8:33am

The key to Subject 2 is reference points, speed control, and mental adjustment. Memorize the reference positions for each item, such as turning the wheel back when the car's rear is parallel during reverse parking. Maintain a steady speed by controlling the clutch—avoid sudden acceleration or deceleration. Practice consistently to build muscle memory, dedicating at least an hour daily to repeating each maneuver. Mentally, don’t fear mistakes; treat them as learning opportunities. Adjust seat height and mirrors for clear visibility. Get used to activating turn signals in advance. Master the steps for reverse parking, parallel parking, and curve driving to avoid confusion. Simulate the test environment several times to ease nerves. Pay attention to details for full marks, stay relaxed, and pass in one go.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

Where Can I Buy Car Windshield Washer Fluid?

Car windshield washer fluid is available at supermarkets, gas stations, 4S stores, car beauty shops, or auto parts markets. Below is a detailed introduction to car windshield washer fluid: 1. Cleaning performance. Windshield washer fluid is formulated with a variety of surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Antifreeze performance. It can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. 3. Anti-fog performance. A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear view. 4. Anti-static performance. After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate surface charges, providing anti-static properties. 5. Lubrication performance. With higher viscosity, it can act as a lubricant, reducing friction between the wiper and the glass to prevent scratches.
14
2
Share

Why does the engine idle normally but misfire at high speed?

The reasons for normal engine idle but misfire at high speed are as follows: 1. Excessive spark plug electrode gap; 2. Improper adjustment of distributor contact gap; 3. Weak contact arm spring; 4. Faulty ignition coil or capacitor. The solutions for engine misfire at high speed are as follows: 1. Open the distributor cover and check the distributor gap, which should be 0.35-0.45 mm. Otherwise, adjust the contact gap. 2. Check the spring tension of the contacts. Use a spring scale to lift the contacts to the normal gap, and the reading on the spring scale indicates the spring tension. The normal value should be 500-700 grams. If a spring scale is not available, replace a set of contacts. 3. Remove the spark plug and observe the spark plug gap. The normal value should be 0.6-0.8 mm. If a specialized measuring feeler gauge is not available, a hacksaw blade with a thickness of 0.7 mm can be used for testing. This type of fault can be easily detected using an oscilloscope in a professional repair shop.
20
1
Share

Where should the temporary license plate be affixed on the car?

Temporary license plates should be affixed as follows: 1. One should be placed on the lower left or right corner of the front windshield inside the car; 2. The other should be placed on the lower left corner of the rear windshield inside the car. Below is relevant information about affixing items on motor vehicles: 1. Motor vehicle license plates should be hung at designated positions on the front and rear of the vehicle, maintaining clarity and completeness. Heavy-duty and medium-duty trucks and their trailers, as well as tractors and their trailers, should have enlarged license plate numbers painted on the rear of the body or cargo compartment, with the characters upright and clearly visible. 2. The motor vehicle inspection compliance mark and insurance mark should be affixed to the upper right corner of the front windshield. 3. Any painting, affixing of marks, or body advertisements on motor vehicles must not affect safe driving.
14
2
Share

What to Do About Rattling Noises from the Car Dashboard?

Solutions for rattling noises from the car dashboard are as follows: 1. First, drive slowly and listen carefully to identify the source of the noise. Check for any foreign objects in the dashboard gaps or surrounding areas, such as panels or padding. If the noise persists after cleaning, it is likely due to loose components from frequent use or improper installation during modifications. 2. If screws were not tightened properly during audio system modifications, gaps between panels can be filled with silicone. Also, check if the plastic ducts connected to the air vent adjustment mechanism have cracked due to thermal changes. Additionally, the air ducts connected to the vents on either side of the CD player, located inside the dashboard, can also be sources of noise. 3. Tighten all potentially loose parts thoroughly and clean the dashboard. If the noise comes from the seams around the air vents, use a flathead screwdriver to remove the screws, take out the vents, and secure them with foam double-sided tape. After reattaching, shake the panel to ensure it is properly fixed.
12
1
Share

What happens when a car runs out of oil?

When a car runs out of oil, the lubrication effect becomes very poor, and the lack of lubrication can cause the engine to seize. The less oil there is, the more severe the consequences. Hazards of running out of oil: Running out of oil is highly detrimental to the car. When driving with insufficient oil, gasoline cannot cover the oil pump, preventing it from being effectively cooled. This can shorten the oil pump's lifespan, and in severe cases, may directly damage the oil pump. Function of engine oil: The main function of engine oil is to provide proper lubrication for the engine's pistons, bearings, and other components, preventing high-temperature and high-pressure gases in the combustion chamber from leaking into the crankcase through the gap between the piston and cylinder.
15
3
Share

How Many Kilometers Before a Major Maintenance is Needed?

Generally, vehicles require a major maintenance service after traveling 30,000 kilometers. The major maintenance items include the following: 1. Replace engine oil, oil filter, fuel filter, and air filter; 2. Inspect the braking system for any oil leaks and check if the brake pads are within the specified thickness; 3. Check the wear condition of the engine belt and adjust the belt tension if necessary; 4. Inspect the transmission, drive shaft, and universal joint boot for oil leaks or damage; 5. Check the tread depth, tire pressure, and wear condition of the tires, and perform a wheel alignment if necessary; 6. Inspect the throttle body and idle valve for excessive dirt and clean them if needed; 7. Check the condition of the spark plugs and replace them if necessary, along with a no-disassembly cleaning of the fuel injectors; 8. Inspect the power steering, braking system, and automatic transmission; 9. Test whether the braking force, gear shifting, and steering are functioning normally; 10. Lubricate all relevant parts of the vehicle.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.