What are the tips for Subject 2?

1 Answers
VanNoah
07/30/25 5:43am
Subject 2 operation tips: 1) Use first gear and idle speed throughout the process, do not step on the accelerator to speed up, drive steadily and slowly. 2) If you cannot see the rear wheel in the side mirror during parallel parking, you can stick your head out or tilt your head to look at the side mirror. 3) Pay attention to the slope starting point if you are not confident. When starting on the slope, be sure to hold the clutch steady and balance the throttle and clutch to avoid stalling or rolling back. 4) Before entering the right-angle turn, you can slow down or stop to straighten the wheels or align the body, staying as close to the right side line as possible. 5) Do not turn the steering wheel too sharply during curve driving, try to take a wide circle after entering the curve. 6) Use first gear and reverse gear at idle speed throughout the reversing into the garage, aim at your reference points, control the key points and timing, and know how to make minor adjustments when deviations are found in the side mirror.
Was this review help?
20
5
Share
More Forum Discussions

What Does a Car First Maintenance Card Look Like?

The first maintenance card is located inside the maintenance manual, and you just need to bring the maintenance manual for the first service. Below are specific details about car first maintenance: 1. First Maintenance Content: During the first maintenance, the main items include changing the engine oil, oil filter, and cleaning the air filter; checking whether the levels of various fluids are normal; inspecting the generator belt and wiper blades for any damage; checking tire pressure for normal levels and looking for signs of uneven wear, bulges, or damage; examining the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; and verifying that all switches and lights in the car are functioning properly. 2. Purpose of First Maintenance: The first maintenance ensures the vehicle's optimal performance; enhances driving safety; reduces engine noise; and extends the vehicle's lifespan.
9
4
Share

What is Half-Clutch Speed Control?

Half-clutch speed control refers to the technique of pressing the clutch pedal when deceleration is needed, allowing the vehicle to move forward by inertia. The method for half-clutch speed control is: 1. Apply the brakes; 2. After the speed decreases, press the clutch; 3. The clutch should be pressed after the brakes but before the brakes are fully engaged. Half-clutch is an unstable connection state of the clutch, where the driver gradually reduces the pressure on the clutch pedal, causing the driving plate and driven plate to slip while rotating. Symptoms of half-clutch operation include: 1. A noticeable resistance against the clutch pedal; 2. Slight vehicle vibration and engine noise; 3. A tendency for slight forward lurching and a drop in tachometer readings.
9
0
Share

What are the trunk dimensions of the Envision?

The trunk width of the Envision is 1030mm, the height is 740mm, the regular depth is 810mm, and the maximum depth is 1710mm. Below are specific details about the Envision: 1. Model: The Envision is the Chinese name for the Buick ENVISION. As a next-generation strategic model from General Motors, it stands out among many joint-venture mid-size SUVs. 2. Variants: There are 7 variants available, including 3 with a 1.5T engine and 4 with a 2.0T engine. All 2.0T models come equipped with a four-wheel drive system and are paired with either a manual or an automatic transmission. 3. Spacious Cargo Capacity: The trunk has a regular volume of 356 liters, which can expand to a maximum of 1372 liters when the rear seats are folded down, allowing for easy storage of large items.
6
5
Share

Why Choose Lavida Over Bora?

Because compared to Bora, Lavida has a more fashionable appearance, more comfortable interior space, and richer configurations. Here are some extended details: 1. Taking the Lavida 1.6L Automatic Comfort Edition and Bora 1.6L Automatic Comfort Edition as examples, Lavida is equipped with a keyless start system, multifunction steering wheel, front parking radar, cornering lights, and other abundant features. With almost the same price, Lavida offers a significantly higher cost-performance ratio than Bora, making it a more worthy choice. 2. In the early days of its launch in the Chinese market, Bora indeed brought a new trend to the Chinese automotive market and was even hailed as the 'performance god car.' However, with the changes of the times and market development, especially after the launch of the Lavida model, which is also from SAIC Volkswagen, Bora began to decline.
13
4
Share

How to Check the Fuel Level on a Motorcycle?

Motorcycles typically have a fuel gauge located on the handlebar, marked with a fuel pump symbol. When the motorcycle is off, the fuel gauge needle usually rests at the bottom, making it easy to identify. Upon starting, observe the position of the needle to determine the fuel level. Additional information about motorcycles includes: 1. Definition: A motorcycle is a two or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel control. It is lightweight, agile, and fast, widely used for patrol, passenger and cargo transport, and as sports equipment. Broadly, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. 2. Basic Components: A motorcycle consists of five main parts: the engine, transmission system, running gear, steering and braking systems, and electrical instrumentation. This includes the overall structure and names of various components.
6
0
Share

What causes abnormal tire pressure in the Volkswagen Sagitar?

The reasons for abnormal tire pressure in the Volkswagen Sagitar are: abnormal tire pressure, unreset tire pressure monitoring, or damaged tire pressure sensors. Abnormal tire pressure: Generally, an alarm will trigger when the pressure is below 1.8 bar or exceeds 3.0 bar. In this case, tire inspection and pressure adjustment are required. Unreset tire pressure monitoring: If the tire pressure monitoring system is not reset after inflating the tires, it will continue to display the previous data, causing the tire pressure warning light to illuminate. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will also illuminate. In case of sensor damage, the only solution is to replace it with a new one.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.