What are the tips for self-selecting license plates on Traffic Management 12123?

2 Answers
SanLondon
07/25/25 1:14am
The tips for self-selecting license plates on Traffic Management 12123 are: first, prepare 20 preferred license plate numbers, then input them in groups of five in descending order of satisfaction. This way, if the desired license plate number is available, it can be selected. Choosing an internet self-selected number must be done carefully; do not randomly input numbers for searching. Rules for self-selecting numbers: Edit a license plate number yourself, then verify whether this number is available. If it is available, the system will immediately confirm it, and the selection process ends. If it is not available, it means the verification has failed. There are a total of 20 chances for verification failures. Time announcement: New number segments will be randomly added to the self-selection pool seven days after being placed in the random pool. This random time is not announced.
Was this review help?
6
3
Share
LeEmery
08/10/25 4:03pm
The first time I used the Traffic Management 12123 self-selection license plate feature, I was a bit confused, but later I summarized a few practical tips. Prepare 5 to 10 number combinations in your phone's memo in advance—nothing too complicated, like simple repeating numbers such as 112233, or easy-to-remember alphanumeric mixes like AA88. After opening the app, first check the rules section to understand the current number pool situation, avoiding trying prohibited numbers like 666 or 888, as they are often taken. When entering, don’t rush—try them one by one. If the first few are already taken, switch to your backups; don’t input them all at once. I found that choosing less popular combinations, like those with letters U or V, which are rarely used, increases success rates. If the operation fails, switch to random selection instead of wasting time. Be patient throughout the process—it usually takes about ten minutes to complete, and practice makes perfect. I also recommend using the app in areas with good signal to prevent lag or disconnection issues.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

Where is the Smart car's cabin air filter located?

The Smart car's cabin air filter is located inside the glove compartment on the front passenger side. Here's some information about cabin air filters: 1. When driving with air conditioning on, the system draws in outside air which contains various particles like dust, pollen, and soot. Without filtration, these particles would contaminate the AC system, reduce cooling performance, and potentially cause allergic reactions, lung damage, or irritation from ozone exposure - all of which affect driving safety. 2. There are two types of cabin filters: standard and activated carbon. The activated carbon version additionally absorbs odors effectively. 3. The recommended replacement interval is typically every 10,000 kilometers.
16
4
Share

How to Pair a Car Remote Key?

To pair a car remote key, you need to visit a 4S shop or a professional car lock company. The functions of the key remote are: 1. Long-press the lock button after turning off the engine to close the windows; 2. Press the horn button on the key to locate the vehicle; 3. Long-press the trunk unlock button to open it automatically; 4. Press the unlock button once to open only the driver's door, and press twice to open all four doors. Methods to maintain the car key: 1. Avoid placing it with metal objects frequently; 2. Do not store the spare key in the car door; 3. Prevent the smart key from falling or being impacted; 4. Keep the smart key away from high temperatures or liquids; 5. Avoid placing the key near electronic devices.
10
0
Share

What Causes Difficulty in Starting a Corolla?

The reasons for difficulty in starting a Corolla are: 1. Battery depletion; 2. Severe engine carbon buildup; 3. Restricted oil flow. The Corolla's body dimensions are: length 4635mm, width 1780mm, height 1435mm, wheelbase 2700mm, fuel tank capacity 50 liters, trunk capacity 470 liters, curb weight 1330kg, and the body structure is a 4-door, 5-seater sedan. The Corolla is equipped with a 1.2L turbocharged engine, with a maximum power of 85 kW, maximum power speed of 5200 to 5600 rpm, maximum torque of 185 Nm, and maximum torque speed of 1500 to 4000 rpm.
16
1
Share

What are the consequences of a timing belt breakage?

The consequences of a timing belt breakage are: it can cause the engine to have valve collision, requiring a major engine overhaul. The method for replacing the timing belt is: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the alternator belt and the alternator belt tensioner; 3. Loosen the crankshaft pulley bolt; 4. Open the engine hood and remove the water reservoir; 5. Remove the engine mounting bracket and the protective cover on the timing belt; 6. Unscrew the alternator mounting bolt and remove the alternator; 7. Remove the cylinder block mounting bracket and take off the crankshaft pulley; 8. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 9. Remove the timing belt and the timing tensioner to complete the replacement.
5
0
Share

What are the principles for handling emergency situations while driving?

The principles for handling emergency situations while driving are: 1. Apply braking to decelerate, ensuring the vehicle comes to a stop or moves at a low speed before a collision to minimize damage; 2. Firmly grip the steering wheel to avoid making large steering adjustments. Safety precautions for driving include: 1. Check fluid levels, tires, lights, and braking effectiveness before driving; 2. Maintain a sufficient safe distance from the vehicle ahead during driving; 3. Observe the status of vehicles ahead and behind before overtaking, and turn on the left turn signal, avoiding sudden steering during the overtaking process; 4. Avoid answering phone calls or engaging in playful behavior while driving; 5. Avoid throwing objects out of the window.
20
0
Share

Can You Turn Left When the U-turn Light is Green?

You can turn left when the U-turn light is green. The situations where U-turns are prohibited are as follows: U-turns are prohibited when there is a 'No U-turn' sign or a 'No Left Turn' sign: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. A U-turn is an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, you must cross the crosswalk before making the U-turn; you cannot make the U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even if you are in the leftmost lane, U-turns are not allowed if there is no sign permitting left turns. U-turns are prohibited in the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any signs, U-turns are only allowed in the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light and cross the stop line before making the U-turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and 12 demerit points. If you miss an exit on the highway, continue to the next exit and leave the highway; do not attempt an illegal U-turn.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.