What are the tips for reversing a car?

2 Answers
LuciaDella
07/24/25 1:35am
Here are some techniques for reversing a car: Adjusting the position between the car body and the corner of the garage: When reversing for the first time, lean forward to look at the right rearview mirror to check the positional relationship between the car body and the corner of the garage in advance. Based on the view observed through the rearview mirror, predict whether the car body will be too close or too far from the corner of the garage if it continues at this angle, then steer to correct it. It is best to maintain a distance of 30 centimeters between the car body and the corner of the garage. Correcting the car body inside the garage: After the rear half of the car body enters the garage space, steer to adjust the position. Observe the left and right rearview mirrors to determine which side the front of the car is tilting toward and which side the rear is tilting toward, then steer toward the side the front is tilting to correct the car body. Finding the right stopping point: Judge when to stop by observing the relationship between the left rearview mirror and the boundary line. When the left rearview mirror covers the boundary line, immediately press the clutch to stop.
Was this review help?
13
3
Share
McEmiliano
08/10/25 9:15pm
When reversing, I believe the key is to take it slow and steady, controlling the speed as if a snail were crawling. I always check the rearview and side mirrors first to ensure there are no moving vehicles or people behind me, and I also turn my head to glance at the blind spots—sudden appearances of bicycles or children can be dangerous. The direction of the steering wheel is also crucial; to reverse left, turn the wheel right, and vice versa. Beginners often make the mistake of oversteering or turning too sharply, which can easily lead to the car scraping against obstacles. I recommend practicing in an empty parking lot a few times to get familiar with the car's dimensions and spatial awareness, so you don’t keep scraping when parking. If reversing at night, make sure the lights are fully on to illuminate the surroundings. With more practice, it’ll feel much smoother, reducing nervousness, saving fuel, and lowering the risk of sudden accidents. Remember: safety first, patience is key, and don’t rush or compete with others for space.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What to Do If the Driver's License Has Not Been Inspected?

Go to the vehicle management office to renew the license. If the driver's license has not been inspected for more than one year but less than two years, you need to retake the subject one exam and pass it before renewing the license. If the driver's license has not been inspected for more than two years, you must re-enroll in a driving school, pass all three subject exams, and obtain a new driver's license. Here are some precautions regarding the renewal of an expired driver's license: 1. The applicant should truthfully submit the required materials to the vehicle management office, declare the specified items honestly, and be responsible for the authenticity of the substantive content of the application materials; 2. The applicant should meet the application conditions specified in the regulations for the application and use of motor vehicle driver's licenses.
20
5
Share

When was the China III standard implemented?

China's Phase III motor vehicle pollutant emission standards were implemented on July 1, 2007. Below is more information about the emission standards: 1. Concept: Automobile emission standards refer to regulations on the content of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulates, soot). 2. China III emission standards: China's Phase III emission standards are equivalent to the Euro III emission standards, requiring HC emissions to be below 0.2g/km; CO emissions below 2.3g/km; and NOx emissions below 0.15g/km.
8
2
Share

What are the reasons why a car won't start after parking and stalling?

There are several reasons why a car won't start after parking and stalling: 1. Battery depletion: When the car battery is depleted, the car may not start after parking and stalling. There are many reasons for car battery depletion, such as lack of water in the battery, battery failure, or prolonged use of the air conditioning. 2. Low temperature: In cold winter weather, cars often fail to start after parking and stalling. This is because in low-temperature environments, the viscosity and rotation speed of the car's engine oil decrease, leading to reduced ignition energy in the battery and decreased molecular activity, making it difficult to form flammable gases. 3. Carbon buildup in the car: Carbon buildup in the car's engine can cause many problems, the most common being the car not starting after parking and stalling. There are many reasons for engine carbon buildup, such as excessive moisture in gasoline, poor fuel quality, and poor sealing of the valve seat ring.
3
4
Share

How Often Should Front and Rear Car Tires Be Replaced?

Car front and rear tire replacement cycles are as follows: 1. Replacement time depends on circumstances: With good driving habits, tires generally need replacement every 3-5 years or after 60,000-80,000 kilometers. In more severe road conditions, such as frequent driving on gravel roads or situations involving constant traffic jams, sudden braking, and sharp turns, the replacement interval will be shorter. 2. Tire aging time: The main material of tires is rubber, which undergoes natural aging. This primarily manifests as hardening of the tire and small cracks appearing on the sidewalls. Natural aging typically occurs within 4-5 years. Tires should be promptly replaced after 5 years of use to prevent the risk of blowouts.
2
1
Share

Are Baojun and Wuling the same company?

They belong to the same company. Both Wuling and Baojun are brands under SAIC-GM-Wuling Automobile Co., Ltd. Here are specific details about SAIC-GM-Wuling Automobile Co., Ltd: 1. Company Scale: The company covers an area of 892,000 square meters with over 20,000 employees. It has modern production workshops mainly for stamping, bodywork, painting, and assembly, forming a production structure focused on mini commercial vehicles and mini passenger vehicles. In 2005, it achieved annual production of 340,088 vehicles and sales of 337,188 vehicles, with a 43% year-on-year sales growth, setting a historical record. SAIC-GM-Wuling has 2,800 dealerships and 2,800 after-sales service outlets densely distributed across 29 provinces, municipalities, and autonomous regions in China. 2. Corporate Culture: Mission: To become a domestically leading and internationally competitive automobile company in the mini and small vehicle sector. Core Values: Customer satisfaction, teamwork, learning and innovation, honesty and trustworthiness, efficiency and pragmatism.
5
5
Share

Why don't 4S stores allow car selection?

4S stores not allowing car selection is only normal under two circumstances: the owner has already confirmed the vehicle to be purchased; there is only one vehicle in stock at the store. Apart from the aforementioned scenarios, it is illegal for 4S stores to prohibit car selection under any other circumstances. Below are a few points to pay attention to when inspecting a car: 1. Check the production dates of the tires and glass: if the dates differ significantly, it indicates a problem. 2. Start the vehicle: check if the lights are functioning properly, if the electronic instruments are working correctly, and if the windshield wipers, turn signal lever, dashboard, etc., are functioning normally.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.