What are the tips for practicing straight-line driving in Subject 3?

1 Answers
LaLucille
07/29/25 6:40pm
When driving in a straight line, the most crucial point is to look far ahead, and if you feel any deviation, promptly adjust the steering wheel to quickly straighten the direction; otherwise, the car may veer off in another direction. The key challenges in the Subject 3 test are as follows: 1. Speed and gear mismatch: Be cautious about the errors of high gear at low speed and low gear at high speed during the test. Before shifting gears, always adjust the speed to match the gear, then switch gears. During driving, remember to glance at the speedometer every eight seconds to prevent such mistakes. 2. Straight-line driving deviation: Many students deliberately slow down during driving due to concerns about not maintaining a straight trajectory, which is not advisable. This behavior can actually increase the likelihood of the vehicle deviating from its path, so it's better to maintain a reasonable and consistent speed.
Was this review help?
20
0
Share
More Forum Discussions

Is the Mercedes GLC spacious?

Mercedes GLC offers relatively spacious interior with a capacity of 550 liters. Exterior Design: At the front, the polygonal grille paired with a starry mesh creates a visually stylish and imposing look. The latest matrix-style LED headlights on both sides are very sharp, and the bottom-through ventilation design makes the front face appear wider. Powertrain Configuration: The Mercedes GLC is equipped with three 2.0T turbocharged engines, with maximum power outputs of 184 horsepower, 211 horsepower, and 245 horsepower respectively. The stronger the power, the higher the price. The entire system is matched with a 9-speed automatic transmission, and the Mercedes GLC is also an all-wheel-drive model.
2
3
Share

What size are the rims on a Civic?

The Civic comes with 16-inch and 17-inch rims. Introduction to rims: Rims are the rotating part of the wheel that connects the tire's inner contour to the wheel hub via spokes, which is the metal component mounted on the axle that supports the tire. Also known as wheel rims, steel rims, wheels, or wheel discs. Rims come in various types based on diameter, width, manufacturing method, and material. Function of rims: They serve as the mounting point for the axle, support the tire, absorb external shocks, facilitate contact between the tire and the road, and ensure the vehicle's driving performance. Evolution of rims: In the past, car wheel bearings were mostly used in pairs with single-row tapered roller or ball bearings. With technological advancements, cars now widely use wheel hub units, and the application and usage of wheel bearing units have been increasing, evolving to the third generation.
9
5
Share

What causes water accumulation in the Song Pro car door?

The reason for water accumulation in the Song Pro car door is the absence of sealing strips around the door or improper installation of the sealing strips. Opening the drainage valve of the car door: There are usually drainage valves at the bottom edge of the car door, with three drainage valves per door. Therefore, water accumulation in the door can be drained by opening these valves. Under normal circumstances, when the car door is closed, the drainage valves are squeezed and automatically open, serving the primary function of automatic drainage. Precautions for drainage: If the car door is deformed or there is a large amount of dust, asphalt, or mud around the valves, it can lead to blockage of the drainage valves, thereby affecting the drainage rate. In such cases, pressing the drainage valve manually will widen the gap, allowing water to be drained by gently lifting the valve. Repeat this process for all three doors. Once the water is drained, the valves will lift and automatically retract.
2
2
Share

What is the matching method for the Besturn B70 window regulator switch?

The matching method for the Besturn B70 window regulator switch is to hold the switch until the window reaches the top and continue holding it for five seconds to complete the matching process. Structure of the window regulator: The window regulator consists of a control mechanism, transmission mechanism, window lifting mechanism, window support mechanism, as well as a stop spring and balance spring. The basic working path of the window regulator is: control mechanism, transmission mechanism, lifting mechanism, and window support mechanism. The balance spring is used to counterbalance the weight of the window, reducing the operating force. The stop spring, installed between the pinion and the support seat, is used to secure the window in the desired position. Working principle of the window regulator: When the motor is activated, it drives the reducer to output power. The active arm and passive arm, or the pulling wire rope, move the window mounting bracket, forcing the window glass to move in a straight line upwards or downwards.
12
4
Share

Where is the anti-theft horn located on the Venucia T70?

The anti-theft horn of the Venucia T70 is located behind the vehicle's bumper. By removing the decorative cover on the upper part of the vehicle's grille, you can see the horn. Working principle of the car horn: The car electric horn produces sound through the vibration of a metal diaphragm. When the driver presses the horn switch, current flows through the contacts to the coil, generating a magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature disconnects the contacts, interrupting the current and causing the coil's magnetic force to disappear. The diaphragm, along with the armature, returns to its original position due to its own elasticity and the spring plate. The contacts then close again, allowing current to flow through the coil once more, repeating the cycle. This continuous vibration of the diaphragm produces the sound. Introduction to the car horn: The horn is the acoustic signal device of a car. During driving, the driver can emit necessary sound signals as required or by regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and conveying signals.
11
4
Share

Why is the Xingyue L a compact model?

Xingyue L is classified as a compact model to highlight its advantages in size, power, and configuration. Exterior design of Xingyue L: The front face of Xingyue L adopts Geely's family design style, with a larger grille compared to previous Geely models. The sporty bumper exudes a bold presence, while the side profile appears robust and solid. The character line extending from the headlights to the taillights gives the side of the body a clean and sharp look. The straight roofline also contributes to better interior space. Powertrain configuration: The Xingyue L is equipped with the Drive-E series 2.0T engine across the lineup, offering two power options. The low-power version delivers 218 horsepower and 325 N·m, while the high-power version provides 238 horsepower and 350 N·m.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.