What are the tips for point deduction questions in the driving test?

1 Answers
Lyla
07/29/25 11:16am
Here are some tips for point deduction questions in the driving test: 1. Scoring cycle: A scoring cycle lasts 12 months. If the points are fully deducted within a cycle, you must undergo education and retake the test. 2. Point reset: The reset of driving license points is not at the end of the year but depends on the date you obtained the license. 3. Point deduction scenarios: In the subject one test, there are no scenarios of deducting 1 or 2 points; the most frequent deductions are 6 and 12 points. 4. Speeding: Speeding less than 20% results in a 3-point deduction; speeding less than 50% results in a 6-point deduction; and speeding more than 50% results in a 12-point deduction.
Was this review help?
2
1
Share
More Forum Discussions

How to Replace the Wiper Blades on a Santana?

To replace the wiper blades on a Santana, follow these steps: 1. Press the clip onto the pin in the middle of the wiper blade; 2. Insert the U-shaped wiper arm into the clip and press it down firmly; 3. After ensuring it is fully in place, straighten the wiper blade and gently place it on the windshield. The functions of the wiper blades are: 1. To remove raindrops and dust from the vehicle's windshield; 2. To improve the driver's visibility; 3. To enhance driving safety. Taking the 2021 Santana as an example, it is a compact car with the following dimensions: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8 liters, and trunk capacity 466 liters. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112 PS, maximum power of 82 kW, and maximum torque of 145 Nm, paired with a 5-speed manual transmission.
16
3
Share

What Causes the Steering Wheel to Pull to the Right When Letting Go?

The reasons why the steering wheel pulls to the right when letting go are: 1. The toe-in and camber angles are not within the standard range; 2. The tires are not dynamically balanced; 3. The upper and lower suspension bushings are loose; 4. The steering linkage ball joints are loose; 5. The vehicle chassis is too soft or the tire pressure is insufficient. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft to achieve the purpose of changing the vehicle's direction. Steering wheels are categorized into: single-spoke steering wheels, dual-spoke steering wheels, triple-spoke steering wheels, and quad-spoke steering wheels. Precautions for using the steering wheel include: 1. Do not turn the steering wheel too forcefully or make sudden turns; avoid turning the steering wheel when the vehicle is stationary; 2. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and accidents; 3. Reduce speed when turning; 4. Gradually turn the steering wheel according to the curvature of the bend when entering a curve.
16
3
Share

Can I Use S Gear on the Highway?

You can use S gear on the highway, but it is not recommended to drive at high speeds for extended periods in S gear. This is because S gear only delays upshifting without altering other operational aspects, which inevitably increases the transmission load in the short term, raises the temperature, and accelerates wear and tear. Additionally, vehicle comfort is slightly reduced in S gear mode, so it's best to avoid prolonged use of S gear. Additional Information: 1. S stands for "sport," which is the car's sports mode. When the gear is shifted to S mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPMs for a longer period. This allows the car to operate at low gears with high RPMs for an extended time, resulting in greater torque output and acceleration. 2. Due to its strong power, S gear is typically used for overtaking or climbing hills. After completing these actions, it is advisable to switch back to the more economical D gear. From a fuel consumption perspective, S gear mode consumes significantly more fuel than normal mode because of the increased fuel injection at high RPMs. It also tends to wear out the transmission more quickly, making it unnecessary for everyday driving.
11
0
Share

What is the Chinese name for the Ford EVOS?

EVOS does not have a Chinese name. The Ford EVOS, as its name inspired by 'Evolution' suggests the meaning of 'evolution,' leads the design direction of Ford's new generation of models, becoming the first mass-produced vehicle to adopt Ford's new generation design language. In terms of configuration: The large horizontal screen in the intelligent cockpit integrates Baidu's artificial intelligence technology and the domestic internet application ecosystem's 'best in-vehicle system for joint venture brands,' the SYNC+ system, which has been upgraded to the second generation in the Ford EVOS. The Ford China SYNC+ 2.0 intelligent connectivity system is equipped with the industry-leading Qualcomm Snapdragon 820A automotive-grade processor, providing high-performance, high-stability, and high-scalability in-vehicle computing power and cloud computing platform, supporting powerful AI functions and smooth, lag-free multitasking. In terms of power: The Ford EVOS is equipped with a 2.0T four-cylinder turbocharged engine across the entire lineup, with a maximum power of 238 horsepower (175 kW) and a maximum torque of 376 Nm, paired with an 8-speed automatic transmission. The official combined fuel consumption is announced as 7.5L/100km.
20
4
Share

Are All Dodge Cars Imported?

Currently, most Dodge cars sold in China are imported. Here is some relevant information: 1. Dodge has a relatively limited sales presence in China, but its performance is absolutely excellent. It can be said to be more high-end and less suited for everyday use. 2. Dodge has developed multiple model series to date. The sedan models include: Viper, Interpid, Stealth, Spirit, Shadow, Neon, Colt, etc.
18
5
Share

What's the matter with the tire pressure warning light on the 2021 Camry?

21 Camry tire pressure warning reasons are as follows: Tire puncture: This situation usually causes very slow air leakage, making it difficult to immediately identify which tire is affected. At this time, you can use a tire pressure gauge to measure. The front tires should be 2.3 bar, and the rear tires 2.5 bar. If any tire is underinflated, inflate it to the proper level and then observe the tire pressure warning light. Excessive tire pressure: According to the international GBT2978-2008 standard, the inflation pressure of car tires should meet the requirements in Tables 1-15: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Therefore, when any tire exceeds 3.0 bar, it will trigger the tire pressure monitoring light to turn on. Long-term lack of inflation: When the tire pressure drops below 1.8 bar, it will cause the tire pressure monitoring light to turn on. Therefore, regular checks should be performed to ensure the tire pressure monitor is functioning properly. If the car experiences issues and the tire pressure monitor does not alert in time, it indicates a problem with the tire pressure monitor.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.