What are the tips for passing Subject Three in one go?

1 Answers
SanAlejandro
07/24/25 8:02pm
Subject Three passing tips are as follows: 1. Reversing into the garage: When aligning and turning the steering wheel, it's better to turn early rather than late. Turning early allows for correction, while turning late may result in directly crossing the line. After entering the garage, adjust the car body, following the principle of turning towards the wider side. Adjustments should be quick with small angles, while also checking the rearview mirror to see if the stopping point is reached. 2. Parallel parking: Keep a moderate distance from the curb to avoid the left wheel crossing the line when entering the garage. Turn the steering wheel quickly to avoid missing alignment points. When exiting the garage and returning the steering wheel, the speed may suddenly increase, so keep the clutch steady. 3. Hill start and stop: While going uphill, observe the distance between the car body and the side line through the rearview mirror. If the distance is too large, adjust right; if close to the line, adjust left—quick turns with small angles. Slightly release the clutch to prevent stalling due to insufficient power, and always check if the designated stopping point is reached. When starting, lift the clutch slowly to avoid stalling; lift to the semi-engaged point before releasing the brake to prevent rolling back.
Was this review help?
16
2
Share
More Forum Discussions

What does idle operation mean?

Idle speed refers to the operation of the engine under no-load conditions, where it only needs to overcome the frictional resistance of its internal components without delivering power externally. The minimum rotational speed required to maintain stable engine operation is referred to as idle speed. Below is an introduction related to engine idle operation: 1. Explanation: When the engine is idling, the reading on the oil pressure gauge indicates the idle working pressure of the fuel supply system, which is generally 0.25MPa or complies with the technical specifications of the vehicle model. When checking the idle working pressure, the oil pressure should rise to 0.3MPa after removing the vacuum tube from the fuel pressure regulator; otherwise, the oil pressure regulator should be replaced. 2. Precautions: During engine operation, it is essential to frequently monitor the readings of the oil pressure gauge and coolant temperature gauge. If the oil pressure and coolant temperature values significantly deviate from the norm, the engine should be shut down immediately for inspection, or a car service station should be contacted.
15
5
Share

What is the model positioning of the Haval H2?

Haval H2 is positioned as a compact SUV, with body dimensions of 4335mm in length, 1814mm in width, and 1710mm in height, meeting the standards for this vehicle class. All Haval H2 models are from the 2018 lineup, equipped with a 1.5-liter turbocharged engine delivering a maximum horsepower of 159, which can satisfy the power demands of most users. In terms of transmission, the Haval H2 offers a choice between a 6-speed manual and a 7-speed dual-clutch transmission. For the drivetrain, all Haval H2 models feature a front-wheel-drive system. The Haval H2 comes with a leather-wrapped multifunction steering wheel, and the three-spoke steering wheel adopts a sporty design, making it both practical and aesthetically pleasing.
13
5
Share

What is the reason why a dual-fuel vehicle suddenly cannot switch to gas?

Conversion switch or the circuit controlling the conversion switch may have problems, and it needs to be repaired at a 4S shop. The following is a detailed introduction about dual-fuel vehicles: 1. Overview: A dual-fuel vehicle refers to a vehicle that uses both fuel and liquefied petroleum gas (LPG) as fuel, mainly existing in the taxi market. 2. Advantages: Stable combustion, no knocking, and convenient cold and hot starts. The storage, transportation, decompression, and combustion of compressed natural gas are carried out under strict sealing conditions, making leakage unlikely. In addition, the gas cylinders have undergone various special destructive tests, ensuring safety and reliability. Compressed natural gas burns safely, produces less carbon deposits, reduces vapor lock and knocking, which helps extend the service life of various engine components, reduces the number of maintenance and repairs, and significantly lowers maintenance costs. 3. Disadvantages: Due to the low energy density of gaseous fuels, natural gas vehicles carry less fuel and generally have a shorter driving range than gasoline vehicles. Since gaseous fuels occupy a certain volume in the combustible mixture in the cylinder (the volume occupied by liquid fuel in gasoline engine cylinders is negligible), the work done when using natural gas as fuel is less under the same cylinder working volume.
5
5
Share

Where is the positioning system of the Haval H2 located?

Haval H2's positioning system is located on the center console. Navigation usage method: 1. Turn on the navigation switch button; 2. The initial interface will be displayed after turning it on; 3. Click the menu button in the lower left corner of the interface; 4. Enter the navigation interface; 5. Determine the vehicle's position based on GPS satellite positioning, and then search for the route to the desired destination. The Haval H2 is a compact SUV, available in both China V and China VI versions, with dimensions of 4335mm in length, 1814mm in width, and 1695mm in height, and a wheelbase of 2560mm. The front and rear suspensions of the Haval H2 are MacPherson independent suspension and multi-link independent suspension respectively, and it adopts front-wheel drive.
16
5
Share

Does V Represent Five or Four?

V represents five. Below are the specific details of automotive emission standards: 1. China III Emission Standard: Implementation times were July 1, 2009, for light-duty diesel vehicles; July 1, 2010, for heavy-duty gasoline vehicles; and July 1, 2008, for heavy-duty gas vehicles and heavy-duty diesel vehicles. 2. China IV Emission Standard: Nationwide implementation times were July 1, 2013, for light-duty diesel vehicles and heavy-duty gasoline vehicles; January 1, 2011, for heavy-duty gas vehicles; and July 1, 2013, for heavy-duty diesel vehicles. 3. China V Emission Standard: The nationwide implementation of the China V emission standard began on July 1, 2017, which reduces nitrogen oxide emissions by 25% compared to the China IV standard and introduces stricter PM emission limits. 4. China VI Emission Standard: The China VI standard will be divided into two phases, 6A and 6B. The first phase, starting from July 1, 2020, prohibits the sale, registration, and licensing of vehicles below the 6A emission standard. The second phase, starting from July 1, 2023, prohibits the sale, registration, and licensing of vehicles below the 6B emission standard.
4
2
Share

What transmission does the Haval H2 use?

Haval H2 uses a 6-speed manual transmission and a 7-speed dual-clutch transmission. According to different types, manual transmissions are divided into 5-speed manual and 6-speed manual, while automatic transmissions include manual-automatic transmissions, dual-clutch transmissions, CVT continuously variable transmissions, and AMT transmissions. The Haval H2 comes standard with Bosch's ninth-generation ESP body stability control system, RMI rollover mitigation system, CDP emergency braking, TCS traction control, HHC hill start assist, HDC hill descent control, smartphone connectivity system, daytime running lights, intelligent start-stop, rearview camera, cruise control, keyless entry system, one-button start system, Bluetooth hands-free calling system, dual airbags, electric power steering, front and rear disc brakes, tire pressure monitoring, and other practical configurations.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.