What Are the Tips for Parallel Parking in Subject 3?

3 Answers
Samantha
07/29/25 9:46am
1. Find the right position to pull over: When you hear the instruction "pull over," first determine the parking spot, then turn on the right turn signal and steer the wheel 90 degrees to the right. When the middle of the car's front aligns with the curb, quickly turn the steering wheel to the left by more than 180 degrees. When the curb is between 1/3 to 1/2 of the front hood (coaches usually prefer 1/3, adjust according to the car model), straighten the wheel. If the car deviates, make minor adjustments. 2. Adjust the right-side distance until the front door handle covers the curb edge: Observe the distance between the car's right side and the curb or edge, making adjustments until the front right door handle covers or almost touches the curb, then quickly straighten the car. 3. Check the left-side mirror—ensure the front left door handle doesn't extend beyond the rear car's body: Before exiting, check the left-side mirror again, ensuring the front door handle doesn't exceed the rear car's body. If there's no reference car, observe the distance between the car's edge and the parking line. This ensures your parking position doesn't obstruct other traffic participants, avoiding scratches or accidents.
Was this review help?
4
0
Share
McLola
08/13/25 11:27am
During my driving license training, I practiced the parallel parking in Subject 3 many times, and I believe the key points are slow speed and observation. First, drive the car to a position parallel to the front car, maintaining a gap of about half a meter, then shift into reverse gear and start backing up slowly. Pay attention to the rearview mirror; when your car's rearview mirror aligns with the center of the adjacent car's rear wheel, decisively turn the steering wheel all the way to the right. Continue reversing, and the car will gradually slide into the parking space. When the car body tilts to about a 45-degree angle, immediately straighten the steering wheel and make minor adjustments to ensure the car stops within the designated area. The whole process shouldn't be too fast—controlling the speed is crucial. During the test, check the rearview mirror multiple times to prevent scraping. With more practice, you'll pass easily. Trying it in an open area first will help you get the hang of it faster.
Was this review help?
15
4
Share
Expand All
GabrielaAnn
10/06/25 7:46am
Last year, I took the parallel parking test in Subject 3. The procedure was quite straightforward: first, park parallel to the front car with about 50 cm distance, then shift to reverse gear and back up. When the rear bumper of the adjacent car disappears from the side mirror, turn the steering wheel sharply to the right all the way. After reversing a short distance until the car body reaches a 45-degree angle, straighten the wheel and make minor adjustments. Don't panic if you make mistakes during practice—the examiner focuses on the final position. Just ensure you check the mirrors and adjust slowly when entering the parking space, keeping the speed low for safety. Repeat the process several times to build muscle memory—safety comes first.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How to Repair Scratched Car Paint?

Minor scratches on car paint can be repaired using fine polishing wax. The principle involves rearranging the molecules of the surface paint layer, effectively moving adjacent surface paint to cover the scratch. Below is an introduction to car paint scratches: 1. The role of the paint film: Car paint must have a paint film with good mechanical properties, excellent fullness, and high gloss. It should also possess strong adhesion, high hardness, and scratch resistance, along with good weather resistance, wear resistance, gloss retention, and resistance to gasoline, alcohol, acid, alkali, and salt spray. 2. Precautions: Unless absolutely necessary, avoid repainting body scratches. This is because the original factory paint includes an electrophoretic layer, which is absent in repainted areas. The lack of an electrophoretic layer can lead to poor adhesion, noticeable color differences, and other issues. Additionally, the original factory paint has more advanced application techniques, resulting in significantly better quality compared to repainted areas.
5
1
Share

Is it necessary to install a license plate bracket?

License plate brackets are necessary to install. Here is a detailed introduction to license plate brackets: 1. Function: A license plate bracket is a frame for holding the license plate, also known as a license plate frame or license plate holder. There is one each at the front and rear of the vehicle. It serves to fix the license plate, protect the license plate, protect the vehicle body, and prevent the license plate from damaging the body. Additionally, installing anti-theft screws on the bracket can provide anti-theft functionality. 2. Compatibility: Some imported vehicles have license plate mounting holes that differ from those of domestic vehicles. License plate brackets can also address the compatibility issues of installing license plates on imported vehicles.
17
2
Share

How Does Tire Pressure Monitoring Work?

There are two principles for automotive tire pressure monitoring. Below is an introduction to these two principles: 1. Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. When the tire pressure is too low or there is a leak, the system will automatically alert. 2. Indirect Tire Pressure Monitoring: The working principle of indirect tire pressure monitoring is that when the pressure of a tire decreases, the vehicle's weight will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speed between tires, the system monitors the tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of the tires to monitor pressure. 3. Characteristics of Both Tire Pressure Monitoring Systems: These two types of tire pressure monitoring devices each have their pros and cons. Direct tire pressure monitoring devices can provide more advanced features, such as measuring the actual instantaneous pressure inside each tire at any time, making it easy to identify the faulty tire. Indirect systems are relatively less expensive, and cars already equipped with 4-wheel ABS (each tire equipped with a wheel speed sensor) only require a software upgrade. However, indirect tire pressure monitoring devices are not as accurate as direct systems, cannot identify the faulty tire, and the system calibration is extremely complex. In some cases, the system may fail to work properly, such as when both tires on the same axle have low pressure.
15
3
Share

What is the emission standard for cars in 2016?

Cars from 2016 may comply with either the China IV or China V emission standards. The China V emission standard was implemented nationwide on January 1, 2017, but some cities adopted it earlier. Car owners can identify the emission standard of their vehicles through the invoice, environmental label, or vehicle registration certificate. Here are some related details: 1. The China VI standard is currently in effect: The China VI standard is divided into two levels, a and b. Level a reduces the limit for carbon monoxide emissions by 30%, while level b reduces it by 50%. The Guangzhou region is expected to directly implement the China VI b emission standard. 2. The China VI standard is more stringent: The implementation of the China VI standard means that cars meeting the China III standard face the risk of being scrapped. Additionally, due to the change in emission standards, used cars meeting the China V standard will depreciate rapidly. On the other hand, stricter emission standards will certainly help reduce air pollution. Moreover, the rapid updates and stringent requirements of emission standards have significantly boosted the development of new energy vehicles.
11
0
Share

How many months old can a baby sit in a car seat?

Generally speaking, babies should be at least six months old before they can sit in a car seat. Here are the relevant details: 1. The reason for 6 months: Babies under six months old have not yet developed their bones to a certain extent, and the support strength of their back muscles is also very weak. At this stage, placing them in a car seat could potentially cause harm to the baby. 2. Age stages for child car seats: Child car seats are typically designed for children under eight years old or weighing less than 36 kilograms. Of course, this is not a strict rule, as car seats do provide better safety for babies. However, car seats should be selected based on the child's age. For babies under one year old, a rear-facing infant car seat (or bassinet-style seat) should be chosen. For children aged one to three years, a fully enclosed car seat is recommended. For children over three years old, it is best to use an enclosed car seat.
6
5
Share

How to Quickly Adapt to the Test Car?

Methods to quickly adapt to the test car: 1. Familiarize yourself with the venue: Visit the test venue in advance to understand the situation. 2. Gather information: Find out about the vehicles used during the test beforehand. 3. Participate in mock test training whenever possible: There are institutions that specialize in mock tests, although they charge a fee. Students who feel the need can try them out. 4. Change vehicles: During regular practice, pay attention to practicing with different vehicles: some driving schools allow vehicle changes, while others do not. If changing vehicles is not possible, take every opportunity to familiarize yourself with different car models to maximize your speed in getting accustomed to the vehicle, which is also very helpful for passing the test.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.