What are the tips for driving straight in the third subject of the small car driving test?

1 Answers
MacAbel
07/29/25 7:42pm
Tips for driving straight in the third subject of the small car driving test: Look ahead and pay attention to both sides, select a good reference point, maintain straight driving, correct the direction in time, and always pay attention to various traffic conditions ahead, so as to detect and deal with them in time; Look far and near to hold the right direction, the driver should adjust the distance of looking ahead according to the change of speed. If the speed is fast, you should look farther; If the speed is slow, you should look closer appropriately; And use the peripheral vision to pay attention to the situation around the vehicle in time; When operating the steering wheel, one hand pulls and the other pushes, and the two hands should operate the steering wheel smoothly and naturally. When correcting the direction, turn the steering wheel early, less, and with turns and returns, so as to pull with one hand and push with the other, and operate with the combined force of both hands; Keep the speed constant and drive straight.
Was this review help?
20
2
Share
More Forum Discussions

How many points are deducted for the car body touching the line during parallel parking?

Deduct 100 points if the car body touches the line during reverse parking. Below is a detailed introduction about the automobile driver's license test: Overview: The motor vehicle driver's license test is an official driving skills examination conducted within the territory of the People's Republic of China to obtain the legal right to drive a motor vehicle. Upon passing the test, the corresponding level of license is issued. Others: The Ministry of Public Security of China has published the revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" on its official website. According to these regulations, the content and passing standards of the driver's license test will be unified nationwide. On May 10, 2021, the Ministry of Public Security held a press conference to announce 12 convenience measures under the "I do practical things for the masses" initiative to deepen the reform of "streamlining administration, delegating power, and improving regulation and services" in public security and traffic management.
15
5
Share

How Many Degrees to Turn the Steering Wheel for a U-Turn in Subject Three?

For a U-turn in Subject Three, the steering wheel is typically turned more than 90 degrees and then adjusted to half a turn. Below is an introduction to the relevant aspects of Subject Three in the driving test: 1. Introduction: Subject Three includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Specific Test Content of Subject Three: The road driving skills test generally includes: preparation before getting on the car, simulated light test, starting, driving straight, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling after traffic accidents.
9
2
Share

Does a new car need an inspection in the second year?

Yes, a new car requires an inspection in the second year. The consequences of overdue vehicle inspection are as follows: 1. No compensation for accidents involving overdue inspection: Insurance policies explicitly state that un-inspected vehicles will be denied claims. If an accident occurs involving a vehicle that has not undergone the required inspection or fails the inspection, or if the vehicle lacks a valid driving license, the insurer will not be liable for compensation. This means the insurance policy only applies to qualified and legal vehicles. In addition to refusing compensation for accidents involving vehicles with overdue inspections, insurance companies will also deny claims for lost vehicles. 2. Vehicles not inspected for three consecutive cycles will be forcibly scrapped: According to Article 4 of the 'Compulsory Scrapping Standards for Motor Vehicles,' vehicles that fail to obtain an inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection period will be forcibly scrapped. Specifically, for private cars, inspections are required every two years for the first six years, annually from the 7th to the 15th year, and every six months after 15 years. If a vehicle fails to obtain an inspection qualification mark for three consecutive inspection cycles, it will be forcibly scrapped.
8
4
Share

Can a tire still be used after being patched 5 times?

A tire that has been patched 5 times can still be used as long as the patches hold air. Below is relevant information about automotive tires: 1. Overview: Automotive tires are one of the most important components of a vehicle. They directly contact the road surface and work together with the vehicle's suspension to absorb shocks during driving, ensuring good ride comfort and smooth operation. They also maintain good traction between the wheels and the road, improve the vehicle's traction, braking, and off-road capability, and bear the vehicle's weight. The critical role tires play in vehicle performance is increasingly recognized. 2. Usage tips: (1) Avoid abrupt starts; whether the vehicle is loaded or unloaded, always start smoothly at low speed to prevent tire drag on the ground and reduce tread wear. (2) On good road surfaces, maintain straight-line driving. Except for meeting other vehicles or avoiding obstacles, avoid swerving or making sharp turns to prevent lateral cutting damage between the tire and rim. (3) When descending long slopes, control your speed appropriately based on the slope's gradient, length, and road conditions. On long, steep, or complex slopes, use gear driving and apply light braking to control downhill speed. This not only avoids emergency braking and reduces tire wear but also enhances driving safety.
17
0
Share

How to Reset the Maintenance Light on a Toyota Highlander?

Toyota Highlander maintenance light reset method: 1. With the engine off, press and hold the short-distance trip meter reset button located below the tachometer. 2. Turn the ignition to the ON position, then release the short-distance trip meter reset button. The display will show the SERVICE indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to complete the reset of the reminder message. Additional information: 1. The Highlander will illuminate the maintenance light as a reminder when service is due. After an oil change, the oil light and maintenance data need to be reset. For some vehicles where manual reset isn't possible, a diagnostic tool may be required for resetting. 2. When the maintenance light comes on in a Toyota Highlander, it's advisable to visit an authorized Toyota service center promptly. Technicians will reset the light after servicing. While DIY maintenance is possible, remember to reset the maintenance light to prevent timing errors. 3. Regular maintenance is crucial. Oil changes are the most common service item. Prolonged oil use leads to degradation, reducing lubrication effectiveness, accelerating engine component wear, and significantly diminishing cooling performance. In severe cases, this can lead to engine seizure.
10
1
Share

What does it mean to drive without following the examiner's instructions?

Driving without following the examiner's instructions means not obeying the examiner's commands. Below are the exam precautions: 1. Before getting into the vehicle: Check if all four doors of the exam vehicle are closed. If any door is not closed, the exam result will be marked as failed. 2. After getting into the vehicle: Observe the vehicle's dashboard to see if the vehicle is turned off or idling. If the tachometer shows zero, start the vehicle, but ensure the gear is in neutral before starting. 3. Adjust the seat and mirrors, and fasten the seatbelt: Test if the handbrake can be released. If not, promptly contact the exam site staff. After completing these preparations, raise your hand to signal. The remote examiner will then send the instruction "Please scan your fingerprint." Use the same finger that was registered in the waiting room for verification. Upon successful verification, a voice prompt will say, "Verifying examinee information, please begin the exam." Only after hearing this instruction should you start driving into the exam items. Driving into the exam items without hearing the "please begin the exam" instruction will be automatically judged as failing to follow the examiner's instructions, resulting in disqualification.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.