···
Log in / Register

What are the tips for driving straight in the Subject 3 test?

3 Answers
LaJasmine
09/05/25 3:06am
Here are the tips for driving straight in the Subject 3 test: 1. Vision: Keep your eyes focused as far ahead as possible while adjusting the direction, so you can promptly detect any deviation of the vehicle. 2. Observation direction: Look far ahead while also paying attention to the near distance, holding the steering wheel straight. The driver should adjust the viewing distance according to the speed. If the speed is faster, look farther ahead; if the speed is slower, look slightly closer. Also, use peripheral vision to monitor the surroundings of the vehicle. 3. Steering wheel: Operate the steering wheel by pulling with one hand and pushing with the other. Make minor adjustments to the steering wheel while driving, turning it slightly in the opposite direction of the vehicle's deviation each time. Generally, as long as the adjustment does not exceed 5 degrees left or right, it should be fine. 4. Speed: Do not exceed the speed limit, which ensures both driving safety and fuel efficiency. During the test, accelerate or decelerate as required.
Was this review help?
12
2
Share
OOmar
09/17/25 3:45am
Maintaining straight-line driving is quite important in the Driving Test Part 3, primarily focusing on keeping the vehicle centered in the lane. Here are my insights: during practice, the instructor emphasizes fixing your gaze on a distant target point, such as the end of the road ahead, to prevent unnecessary steering wheel movements. Also, keep your hands relaxed on the wheel—avoid gripping too tightly—and make slight adjustments, keeping the steering angle under 5 degrees to avoid point deductions by the examiner. Maintaining a speed around 30 km/h is most stable; going too slow or fast can easily cause deviation. Practice more on smooth roads to develop a feel for the car, and keep your shoulders relaxed. In case of crosswinds or uneven road surfaces, slow down in advance and stabilize the vehicle—these skills come with experience. Don’t stress; with more practice, you’ll get the hang of it. The pass rate for Driving Test Part 3 is relatively high.
Was this review help?
8
5
Share
Expand All
CameronLynn
10/31/25 4:16am
I really struggled with practicing straight-line driving before my driving test (Subject 3), always ending up with a snake-like path. Later, I summarized a few tips: find a long, straight, and empty road to drive slowly, gently guide the steering wheel without forceful turns, and remember the mantra "eyes far, hands light." Maintaining a speed between 25 to 35 km/h is the most worry-free, avoiding sudden acceleration or braking. Also, keep a calm mindset, don’t constantly check the dashboard, and just focus on the road ahead. At home, you can simulate the sitting posture and imagine the slight adjustments of the steering wheel to build a habit and reduce panic. If you encounter bumps during the test, take a deep breath and stay steady. These small tricks helped me pass on my first try, and now I drive quite smoothly.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

How to reset the raised rear sunroof of the Tiguan?

Tiguan sunroof rear reset method: It can be operated manually via the crank handle. After turning on the ignition, hold down the circular sunroof switch for a few seconds, and the sunroof will automatically open and close. Release the switch, and the sunroof will be reset. Before resetting, adjust the springs of the sunroof dust screen and lubricate the sunroof sliding rails. During the reset process, ensure the sunroof is fully closed. The Volkswagen Tiguan is a compact SUV with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, and a wheelbase of 2684mm. In terms of power, the Tiguan is equipped with a 1.8T engine across all models, delivering a maximum output of 118 kW and a peak torque of 250 Nm, paired with a 6-speed automatic transmission, achieving a top speed of 192 km/h.
17
0
Share

What transmission does the Dongfeng Fengdu MX6 use?

Dongfeng Fengdu MX6 uses a CVT transmission, which has a relatively unique structure. The CVT transmission is a common type of automatic transmission with a very simple internal structure, consisting of only two pulleys and a steel belt. The steel belt can move along the pulleys, allowing the transmission to change gears and torque. The CVT transmission can achieve continuously variable transmission within a fixed ratio range without any jerking during gear shifts. However, this type of transmission cannot be paired with high-power engines. The CVT transmission relies on the friction between the steel belt and the pulleys to transmit power. If the engine torque is too high, the steel belt may slip. Therefore, CVT transmissions are typically used in family cars, not performance vehicles. The Dongfeng Fengdu MX6 has body dimensions of 4625mm in length, 1790mm in width, and 1735mm in height, with a wheelbase of 2630mm. It offers front-wheel drive and all-wheel drive options, and has a fuel tank capacity of 65L.
7
4
Share

What does 102Y tire mean?

102 indicates a load index of 850kg, and Y means the maximum speed of this tire is 300 km/h. Some tires also have speed limit symbols marked with letters such as P, R, S, T, H, V, Z representing various speed limits. The following are the functions of car tires: 1. Support the full weight of the vehicle: Car tires support the full weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Improve vehicle performance: Car tires transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the car's power performance, braking performance, and off-road capability; they work together with the car suspension to cushion the impact during driving and dampen the resulting vibrations. 3. Prevent early damage to car components: Car tires prevent car components from suffering severe vibrations and early damage, adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel economy.
16
4
Share

What are the reasons for high fuel consumption in Wuling Rongguang?

Wuling Rongguang's high fuel consumption reasons are as follows: 1. Fuel consumption fluctuation caused by temperature influence: Generally in winter when temperatures are low, fuel consumption increases, almost comparable to fuel consumption when using air conditioning in summer. This is because low temperatures cause the engine to dissipate more heat. 2. Vehicle not maintained for a long time: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty oil results in poor lubrication, increasing resistance in various moving parts of the engine, requiring more energy to overcome this resistance, thus increasing fuel consumption. 3. Spark plugs need replacement: Spark plugs are often overlooked. Although they may still function, insufficient ignition energy can cause delayed ignition, missing the optimal ignition timing.
12
4
Share

Can I Stop and Adjust When Pulling Over?

When pulling over, you cannot stop and then readjust; you must complete the maneuver in one attempt. Here are some key points to note for the Subject 3 driving test: 1. Pre-drive inspection: Before starting the Subject 3 test, you must walk around the vehicle for inspection. The test vehicle usually has two sensors, one at the front and one at the rear. Pause briefly near these sensors during the walk-around to ensure they detect you. 2. Adjust before operating: Adjust the car's mirrors and seat height, then confirm they are properly set. Ensure you can see the rear wheels through the mirrors. Fasten your seatbelt and verify the gear is in neutral before ignition. 3. Light simulation test: This requires flexible mastery of light controls. Practice light operation techniques during training and respond to test instructions within 5 seconds. 4. Shoulder checks: During Subject 3 practice or testing, perform proper shoulder checks. Remember critical observation areas during routine practice and execute these actions correctly during the test to avoid point deductions.
11
3
Share

Does Manual AC Setting Affect Fuel Consumption?

Manual AC settings have minimal impact on fuel consumption. The core component of the AC system is the compressor, which is connected to the engine crankshaft via a belt. When the AC is off, the compressor pulley idles; when activated, the compressor engages, consuming engine power and increasing fuel usage. Behind the dashboard lies a heat exchanger with an accompanying fan. Since fan speed variations don't alter cooling capacity, they hardly affect engine fuel consumption. Key considerations for car AC usage: 1. Avoid minimum temperature settings: Many drivers excessively lower cabin temperature in hot weather, forcing continuous operation of the AC pump and blower. This not only increases fuel consumption and accelerates vehicle wear but also generates harmful emissions affecting occupant health. 2. Limit electrical device usage: Simultaneous operation of multiple in-car electronics can exceed 1KW power draw - nearly matching small cars' AC compressor consumption (typically 1.5KW). This electrical load converts directly into additional engine fuel consumption. Overloading electrical systems also accelerates vehicle deterioration.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.