···
Log in / Register

What are the tips for driving on the highway for the first time?

4 Answers
PaigeRose
07/29/25 10:24pm
Tips for novice drivers on the highway include: 1. Maintain a long field of vision and keep a safe distance. 2. When driving on the highway, try to look as far ahead as possible, and avoid focusing solely on the rear of the vehicle in front. Stay away from new cars without license plates. 3. Do not stop in the emergency lane. Procedures for dealing with traffic accidents on the highway are as follows: 1. While driving on the highway, if the information board indicates a traffic accident ahead at a certain kilometer mark, immediately slow down as instructed by the board or exit the highway at the nearest exit. 2. If there is no nearby exit, stay alert, reduce speed, and safely bypass or detour around the accident site under the direction of traffic police on the scene. 3. When passing through the section where the accident occurred, do not stop to watch, as this not only affects the passage of other vehicles and the traffic police's investigation of the scene but also increases the risk of another accident.
Was this review help?
15
4
Share
Leo
08/15/25 11:06pm
The first time I drove on the highway, I mainly focused on safety details. Before driving, I always check the tire pressure and brake performance to ensure there is no wear; then I warm up the engine and accelerate smoothly onto the highway, avoiding sharp turns. On the highway, I maintain a following distance of at least 100 meters, using the three-second rule to judge the distance: choose a fixed point ahead and count to three seconds—if I don’t catch up within that time, it’s safe. I keep my speed within the limit and avoid following others in overtaking; in heavy rain or fog, I immediately turn on the headlights and slow down, paying extra attention to the road ahead when visibility is poor. When fatigued, I pull over at a service area for a 15-minute break and drink some water to refresh myself. These habits help me drive steadily and without stress.
Was this review help?
1
0
Share
Expand All
AlexisMarie
10/18/25 2:45am
Reflecting on my first highway experience, psychological preparation is crucial. Before getting in the car, I took deep breaths to relax, adjusted the seat and music to prevent stress from controlling the wheel. I practiced lane changes and acceleration on regular roads first, only venturing onto the highway after gaining familiarity. During the drive, I stayed calm in heavy traffic, signaled early for lane changes, and avoided cutting in or slamming the brakes. I kept my eyes on road signs ahead and the distance, not just the speedometer. When feeling tense, I rolled down the window for fresh air or chatted with friends to ease the tension. With regular practice like this, highway driving soon became second nature.
Was this review help?
13
4
Share
Expand All
Keira
12/01/25 3:25am
I always prioritize vehicle inspections. High speeds can turn minor issues into major problems; before setting off, I check tire pressure and tread, and ensure oil and fluid levels are sufficient. Don’t overload the luggage to maintain balance and stability. Once on the highway, use cruise control for steady speed, which is more fuel-efficient and safer; keep an eye on the fuel gauge and don’t wait for the red light to find a gas station. During the trip, observe if the lights are working and the wipers are effective—address any issues by exiting the highway promptly for repairs. These simple steps can prevent unexpected hassles.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

What does a car tire pressure of 220kpa mean?

Car tire pressure of 220kpa means that the designed value of the tire pressure is 220kpa. During normal driving, the tire pressure needs to be inflated to 220kpa to ensure the designed performance of the car. Different cars may have slightly different designed tire pressures. 220kpa stands for 220 kilopascals, where kpa refers to kilopascals, a unit of pressure. Tire pressure refers to the air pressure inside the tire, which is like the blood pressure of the car. The level of tire pressure plays a crucial role in the performance and power of the car. Tire pressure is an indicator of the car's load capacity, and the size of the car's load depends on the level of tire pressure. Tires are circular elastic rubber products mounted on metal rims, used on various vehicles or machinery to support the vehicle body, absorb external shocks, achieve contact with the road surface, and ensure the driving performance of the vehicle.
7
0
Share

How to Drive Out When the Tire is Against the Curb?

The methods to drive out when the tire is against the curb are: 1. Start slowly and gently steer the wheel towards the middle of the road; 2. Release the vehicle's handbrake, get out of the car, and push it forward. The potential damages to the car from hitting the curb include: 1. Direct contact between the tire and the curb can cause the sidewall cords to break or bulge if not handled properly; 2. If the curb is too high, it may scratch or dent the wheel rim, affecting aesthetics and even causing deformation; 3. The suspension and various rods are prone to deformation; 4. If the curb is too high, it may lead to undercarriage scraping, oil pan leakage, or damage to the front bumper; 5. Glass on the curb can damage the tires.
15
1
Share

What does China V mean?

China V refers to the National Fifth Stage Emission Standard for Motor Vehicles, also known as the China V standard. The methods to check a vehicle's emission standard are: 1. Check the motor vehicle conformity certificate; 2. Look for the vehicle packing list; 3. Log in to the motor vehicle exhaust pollution supervision and management website; 4. Check the back of the environmental protection label on the car's front windshield; 5. Bring the vehicle registration form to the vehicle management office for inquiry. The main pollutants emitted by vehicles include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. Through the application of technologies such as the active layer of catalytic converters, secondary air injection, and exhaust gas recirculation systems with cooling devices, these vehicle emission pollutants are controlled and reduced to levels below the specified standards.
16
2
Share

What is dexos engine oil?

dexos is not an engine oil brand, but a certification provided by General Motors to enhance the performance level of engine oil and ensure the quality of aftermarket oil for vehicles. It stipulates that vehicles under General Motors must use engine oil with dexos certification. Engine oil, also known as engine lubricant, is composed of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of the base oil's performance. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention.
12
4
Share

Why is Infiniti called Dongfeng Infiniti?

Infiniti is called Dongfeng Infiniti because: Dongfeng Motor Co., Ltd. and Japan's Infiniti are joint ventures. Taking the 2019 Infiniti Q60 as an example, its body dimensions are: length 4685mm, width 1853mm, height 1397mm, wheelbase 2850mm, fuel tank capacity 76l, trunk capacity 415l, and the body structure is a 2-door 4-seater hardtop coupe. The 2019 Infiniti Q60 is equipped with a 2.0T turbocharged engine, with a maximum power of 155kW and a maximum torque of 350Nm, matched with a 7-speed automatic transmission. It adopts a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension.
1
1
Share

What to Bring for the First Maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; vehicle registration book; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice. Take these to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific timing varying by vehicle, typically after driving 1,000 to 3,000 kilometers. It's essential to attend the first maintenance promptly, neither early nor delayed. The completion of the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven under standard load and normal speed as required by the car. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first will be the standard. The first maintenance includes: oil change, oil filter replacement, cleaning the air filter, checking various fluid levels for normality, inspecting the generator belt and wiper blades for damage, checking tire pressure for normality, and examining tires for damage or bulges. Time required: Completing all tasks takes approximately 2 hours. The most crucial aspect of a new car's first maintenance is the oil and oil filter change. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models require different oil specifications. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It's important to note that the interior of the car body should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or take them out to brush with detergent, dry them, and then put them back. There are many holes under the rubber mats on the floor of the driver's compartment. Water entering these areas won't dry but will flow through the holes to parts like the transmission, causing erosion and corrosion. The best practice is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it's recommended to drain the antifreeze and add the same brand from the beginning. Different brands of antifreeze have significantly different chemical properties. Various functional additives may corrode others. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to bolts and nuts to prevent rust, but this poses a safety risk. At high speeds, bolts and nuts can loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI car: The starter of an EFI (Electronic Fuel Injection) car differs from that of a regular car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and working conditions, ensuring a smooth start.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.