What Are the Tips for Buying a Car at an Auto Show?

What to Do When the Window Seal Strip Lifts Up?

Solution for the lifted window seal strip: It needs to be pressed back down. If the strip is deformed, it can only be replaced. When the outer seal strip of a vehicle has issues, timely repair is necessary. Otherwise, if the strip falls off while the vehicle is in motion, it poses a certain danger to vehicles behind. Below is more information: 1. If the outer window seal strip of a vehicle lifts up, it can be directly replaced or reattached. The outer seal strip on a vehicle's window plays a significant role, providing sealing, windproofing, and leak prevention. 2. Once damaged or lifted, it can affect the vehicle's future use, so immediate repair is required upon discovery.

14

0

Share

How to Deal with Window Fogging When Using Air Conditioning in the Car?

Here are the methods to solve the problem of window fogging when using air conditioning in the car: 1. Blow cold air: When the fogging is not severe, you can appropriately open both windows to allow air convection. Alternatively, turn on the cold air from the air conditioning, which can quickly eliminate the fogging. The advantage of both methods is their quick effectiveness, but the downside is that they are not suitable for prolonged use in cold weather or during rain or snow. 2. Blow hot air: Blowing cold air provides a quick but temporary solution, while blowing hot air can fundamentally solve the issue of window fogging. The fogging will not return after the hot air is turned off, nor will it make the car's occupants feel even colder in the winter. However, the biggest drawback of blowing hot air is its slow effectiveness, requiring a long wait to see results. 3. Anti-fog spray: The principle of anti-fog spray is simple. Spraying a layer of water on the windshield forms a protective film that prevents water vapor condensation. However, the effectiveness of this protective film is short-lived, requiring repeated applications to maintain the effect.

19

2

Share

Will Rear-End Collisions Result in Point Deductions?

Whether a rear-end collision results in point deductions depends on the circumstances. If it is purely a traffic accident, no points will be deducted; however, if it involves a violation of traffic laws, points will be deducted. Tips to Prevent Rear-End Collisions: When driving at speeds exceeding 100 km/h on highways, maintain a safe distance of at least 100 meters from the vehicle ahead. Regularly check the vehicle behind you. If you feel it is following too closely, lightly tap the brakes to alert the trailing driver. If traffic ahead is dense and moving slowly, turn on your hazard lights to remind the trailing vehicle to slow down. Liability Determination in Rear-End Collisions: Generally, the trailing vehicle bears full responsibility in a rear-end collision. However, if the leading vehicle reverses, rolls back, or forces a lane change, the leading vehicle may be at fault. The specific liability is determined based on the actions of the parties involved and the severity of their faults in causing the accident.

5

4

Share

What is the difference between BYD Tang DM and Tang Dmi?

The differences between BYD Tang D-M and Tang D-mi are as follows: 1. Different engines: Due to their different power strategy orientations, there are significant technical differences between the two. The D-M system uses a 2.0T engine, which, although more powerful in terms of data, is also more traditional in technology and has not been updated for many years. In contrast, the D-Mi system features the latest 1.5T Xiaoyun engine, which adopts the Miller cycle, making it more advanced in technology, with higher thermal efficiency and lower fuel consumption. 2. Different transmissions: The D-M is equipped with a traditional 6-speed wet dual-clutch transmission, while the D-Mi is equipped with an E-CVT continuously variable transmission. Just by the names, it's clear that the former is more spirited, while the latter is smoother. Although both can directly drive the wheels with the engine, the D-M is strong direct drive, whereas the D-Mi is weak direct drive, relying more on the electric motor. 3. Different motors: Although both are permanent magnet synchronous motors, the D-Mi series all feature a front-mounted single motor, available in two versions: 145kW and 160kW. The D-M, in addition to a 180kW rear-mounted single motor version, also has two models with front and rear motors (250kW + 180kW). Therefore, the entire D-M series are four-wheel-drive models, with two of them capable of achieving all-electric four-wheel drive, while the D-Mi models are all two-wheel drive.

16

0

Share

How to Change Windshield Washer Fluid in Winter?

When replacing windshield washer fluid in winter, it is essential to consider the freezing point of the fluid. Here are the detailed steps: 1. The freezing points of winter and summer windshield washer fluids are different. In cold weather, always use winter-specific windshield washer fluid: Using non-winter fluid may cause it to freeze, leading to unnecessary damage to the vehicle. If the fluid accidentally gets into your eyes, rinse immediately with clean water. 2. To add winter windshield washer fluid, first open the engine hood and locate the filler cap with the washer symbol: Open the cap and pour the fluid in until it reaches the marked level on the reservoir. 3. First, drain the summer windshield washer fluid completely, then pour in the winter fluid: To remove the summer fluid, press the windshield washer button continuously until the system is fully cleared.

14

0

Share

How to Remove a Broken Key from a Door Lock

Solutions for removing a broken key from a door lock: 1. If the key has just been inserted into the lock and hasn't been turned yet, the main goal is to extract the broken part. If a small portion of the broken key is protruding, gently tap the area around the keyhole with controlled force. The gap between the key and the keyhole allows the key to gradually come out due to inertia. 2. Utilize available tools such as eyebrow tweezers, small pliers, or needle-nose pliers to grip the broken end of the key and gently pull it out. Alternatively, adding pencil shavings, graphite powder, or carbon powder into the lock can increase lubrication, making it easier to remove the key. 3. Use a drill with a small bit to slowly create a thin hole in the center of the broken key. Insert a thin wire or steel thread into the hole and attempt to turn the key. If successful, rotate the key back to its original position and remove it. 4. Pour 502 glue or similar adhesive into the drilled hole. Once the glue has solidified, try removing the key again. If drilling tools or wires are unavailable, directly glue the two broken key parts together. Wait for the glue to set before gently turning and removing the key. Be extremely careful not to let glue drip into the lock cylinder.

16

5

Share

What Are the Tips for Buying a Car at an Auto Show?

What to Do When the Window Seal Strip Lifts Up?

How to Deal with Window Fogging When Using Air Conditioning in the Car?

Will Rear-End Collisions Result in Point Deductions?

What is the difference between BYD Tang DM and Tang Dmi?

How to Change Windshield Washer Fluid in Winter?

How to Remove a Broken Key from a Door Lock

Is it possible to overtake on highway curves?

How to Adjust High Beams by Yourself?

What is the correct parking sequence for one-button start?

How to Reset BMW Service Light?