What are the tips for answering B2 subject one questions?

1 Answers
DiFaith
07/29/25 5:19pm
Here are the tips for answering B2 subject one questions: 1. Do not cross solid lines or pass over dashed lines, give way more in front of obstacles. Turn left first, then right, when encountering water, use low gear and pass steadily, and yield when seeing someone cutting in line. Use low gear for uphill to have enough power, use low gear for downhill to reduce accidents, and give way to special vehicles. 2. On the road, watch the markings and signs, when overtaking, keep to the right. In case of a flat tire, stabilize the direction and brake lightly. Assembled vehicles are not allowed on the road, driving them will revoke the license. Do not drink and drive, walking home is much safer. 3. Do not stop at gas stations or fire hydrants, and keep a distance of 30 meters if parking is necessary. On turning roads, keep to the right, do not overtake or occupy the lane, and keep a distance of 50 meters when parking. On mountain roads, do not overtake, and give way to the side with the cliff. 4. When crossing water, stop first, stop, look, and then pass. When encountering deer, they are wild, when encountering cows, they are livestock. Pay attention to yellow road signs, children, pedestrians, and bicycles.
Was this review help?
18
5
Share
More Forum Discussions

What are the dimensions of a tractor head in terms of length, width, and height?

The maximum standard dimensions are a length of 13000mm (13 meters) and a width of 2500mm (2.5 meters). National regulations on trailer external dimensions: Single-axle semi-trailer: Length 8600mm, width 2500mm, height 4000mm; Two-axle semi-trailer: Length 10000mm, width 2500mm, height 4000mm; Three-axle semi-trailer: Length 13000mm, width 2500mm, height 4000mm; Center-axle (caravan) trailer: Length 8000mm, width 2500mm, height 4000mm. Combination schemes for tractors and semi-trailers: In terms of height, the height of the tractor's fifth wheel must be considered to determine the semi-trailer's height. Generally, the head heights of major domestic tractor manufacturers are not uniform, ranging from 1.35 meters to 1.42 meters. The size of the kingpin is divided into 90mm and 50mm. Since heavy cargo transportation is still predominant in China, most configurations use the 90mm kingpin.
10
1
Share

Does the Patrol have 7 seats?

The Patrol has 7 seats. Here is the extended information about the Patrol 7-seater: 1. The Patrol model adopts a 7-seat 2+3+2 layout. 2. The Nissan Patrol 7 has body dimensions of 5140×1985×1940mm, with a wheelbase reaching 3129mm. 3. Nissan Patrol configuration: 7 seats, 18-inch wheels, underbody spare tire, 2 airbags, halogen headlights, LED taillights, rear fog lights, power windows, smart key, one-button start, power-folding mirrors (body-colored), intelligent 4WD system (hill descent control, LSE+ rear differential lock, hill start assist, cruise control, diamond-patterned fabric seats, dual-zone automatic air conditioning, tire pressure monitoring, front and rear openable center armrest, multifunction steering wheel, leather-wrapped center console trim.
8
2
Share

How to Replace the Battery in a New BMW X6 Key?

To replace the battery in the key fob of a new BMW X6, follow these steps: 1. Gently press the small switch on the back of the key fob to remove the mechanical key. 2. Press the button on the back of the key fob to detach the rear cover. 3. Slide open the battery compartment on the left side of the key. 4. Remove the depleted old battery. 5. Insert the new battery, ensuring the positive side faces upward. 6. After installing the battery, reassemble the key. Here are some important notes regarding the key fob battery: 1. Most car remote keys use a CR2032 coin battery. CR stands for lithium-manganese coin battery with a voltage of 3 volts, and 2032 indicates a battery diameter of 20mm and a thickness of 3.2mm. 2. The specific model number is labeled on the original battery, and you can also refer to the car manual for details.
4
4
Share

How to Set Up Automatic Tilt-Down for Rearview Mirror When Reversing in Tayron?

Tayron rearview mirror automatic tilt-down setting mainly involves the following 5 steps: 1. Start the vehicle and pull up the handbrake. 2. Shift the vehicle into reverse gear, i.e., R gear. 3. Adjust the rearview mirror knob to the R position. 4. Use the rearview mirror knob to adjust the right rearview mirror to the desired tilt-down position. 5. Shift back into P gear, and the vehicle will record this automatic tilt-down position of the rearview mirror, which will automatically tilt down when reversing. The purpose of the rearview mirror tilting down is to allow the driver to see the road when parking on the roadside, avoiding scratches to the tires or rims during parking. When the vehicle speed exceeds 15km/h, or when the knob is turned from the right to the center or left position, the rearview mirror will return to its initial position.
18
0
Share

Where is Li Auto's production location?

Li Auto's production facility is located in Jiangsu, China. Below is relevant information about Li Auto: 1. Li Auto's manufacturing plant is situated in Changzhou, Jiangsu. The plant is primarily divided into stamping, welding, painting, assembly, and office areas. The stamping molds are sourced from Spain's Matrici, robotic arms mainly come from Japan's FANUC, large stamping lines are provided by Jinfeng Machinery, and the overhead cranes use Germany's DEMAG 50t-grade products. 2. Founding date: July 2015. 3. Founder: Li Xiang. 4. First vehicle model: Li ONE.
6
5
Share

How to Replace the Rear Brake Pads of an Audi Q5?

Audi Q5 rear brake pad replacement steps: 1. Connect to the vehicle's OBD port. 2. Select 'rear brake pad replacement' on the diagnostic tool. 3. Wait for the rear brake caliper pistons to retract. 4. Remove the rear wheels. 5. Loosen the two caliper mounting bolts. 6. Remove the brake caliper. 7. Install new brake pads. 8. Reinstall the caliper in reverse order. 9. Confirm completion on the diagnostic tool. Brake pad information: 1. Typically requires replacement every 60,000 km. 2. Service life depends on pad material and driving habits.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.