···
Log in / Register

What are the timed items in Subject 2?

4 Answers
MacPatrick
07/29/25 10:53pm

Parallel parking and reverse parking are timed, with the timer starting when the vehicle reaches the starting point of these maneuvers. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1, C2), the test items include five mandatory components: reverse parking into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Below are some important notes for the Subject 2 test: 1. Fasten your seatbelt: Always buckle up immediately after getting in the car. Make sure not to fasten it backward or to the passenger seat, as the system will directly deem the test as failed. Do not unfasten the seatbelt during the entire test. 2. Adjust the seat and mirrors: After entering the vehicle, adjust the seat and mirrors, fasten the seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are essential. Ensure all preparations are complete before starting. 3. No stopping during the test: There is no time limit for reverse parking, but it is crucial not to stop during the maneuver. If the wheels remain stationary for 3 seconds, the system will judge it as an intermediate stop. Therefore, controlling the speed is key. 4. The time limit for starting on a slope is 30 seconds: The system will provide an audio reminder every 10 seconds during the 30-second period for starting on a slope. Exceeding this time will result in an automatic failure.

Was this review help?
13
5
Share
DePiper
08/16/25 12:28am

In the Subject 2 driving test, the timed items mainly include reversing into the garage and parallel parking. Reversing into the garage is typically limited to 120 seconds, while parallel parking must be completed within 90 seconds. When I was learning to drive, I felt the pressure of these timed sections. For reversing into the garage, it's crucial to plan the route in advance and avoid hesitation—exceeding the time limit results in an automatic failure. On my first attempt, I was so nervous that I ran out of time and had to retry. The instructor always emphasized practicing reference points and maintaining smooth movements to save time. Other items, like stopping on a slope, are not individually timed, but the entire Subject 2 test has an overall time limit of approximately 15 minutes. The timed elements test efficiency in real parking scenarios, and practicing with a stopwatch during preparation is very helpful—just don’t panic. Staying steady while aiming for speed is key. It took me intensive training to finally pass.

Was this review help?
17
3
Share
Expand All
VonHaley
10/18/25 5:29am

The timed portion of Subject 2 focuses on several key items, with reverse parking and parallel parking being the most critical. Reverse parking must be completed within 120 seconds, while parallel parking allows only 90 seconds. As a training instructor, I often emphasize not to underestimate these timing requirements—they assess accurate operations under emergency situations, such as quickly deciding the parking angle. During regular lessons, I have students practice repeatedly to ensure each movement is concise and efficient. Timeouts commonly occur due to unfamiliarity with the vehicle or nervousness. I recommend beginners set a timer during field practice. Other maneuvers like right-angle turns aren't individually timed, but the overall pace must be well managed. Mastering these will make the test go smoothly.

Was this review help?
8
3
Share
Expand All
SanCarter
12/01/25 6:08am

The timed items in Subject 2 are reversing into the garage and parallel parking. The time limit for reversing into the garage is 120 seconds, and for parallel parking it's 90 seconds. I felt a lot of pressure during the test, especially with reversing into the garage—if I was a bit slow, I'd exceed the time limit. Remembering the key points is most important; with enough practice, you'll naturally get faster. Parking on the slope isn't timed separately, but the whole process needs to be quick. Practice more and don't be nervous.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

Where to add water to the Chevrolet Malibu XL radiator?

Steps to add water to the Malibu XL radiator are as follows: 1. Turn the pressure cap counterclockwise. If a hissing sound is heard, wait until the sound disappears before opening; 2. Add an appropriate amount of coolant into the coolant expansion tank, ensuring the level is between the MAX and MIN marks on the tank; 3. Start the engine with the coolant expansion tank cap open; 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add an appropriate amount of coolant to the expansion tank until the level reaches between the MAX and MIN marks on the coolant expansion tank; 5. Reinstall the cap, ensuring the pressure cap is hand-tightened and fully seated.
18
4
Share

What Causes Abnormal Noise in Car Air Conditioners?

Reasons for abnormal noise in car air conditioners: 1. Lack of lubricating refrigerant oil inside the compressor, causing metal friction sounds when the compressor's electromagnetic clutch engages. 2. Abnormal noise due to excessive tension on the air conditioning belt. 3. Faulty electromagnetic clutch, with damaged internal bearings producing abnormal noise. The following is an introduction to the car air conditioning system: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle. It includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure that is easy to operate. The air conditioning system can provide a comfortable environment for passengers and reduce driver fatigue.
12
2
Share

Will there be any problems if the Verano's chassis is hit while driving?

Hitting the chassis while driving the Verano can cause problems. Below are the main impacts of chassis scraping during driving: 1. Fuel tank - Impact can deform the fuel tank. 2. Wiring - Some wiring is located on the chassis, which may lead to wiring failures. 3. Exhaust pipe - Frequent impacts can damage the exhaust pipe. 4. Engine oil pan - Wear can affect engine performance. Here is additional information: 1. The chassis typically refers to the automobile chassis, which is the main framework of the vehicle's underside. All power components of the vehicle, including the engine, transmission, differential, and suspension system, are installed on the chassis. 2. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life.
8
1
Share

How to turn on the rear wiper of Honda CR-V

Here are the methods to turn on the rear wiper of Honda CR-V: 1. Push the wiper lever backward (press down to the first gear) to activate the rear window wiper. 2. Lift the wiper lever upward to activate the front wiper spray, and pull the wiper lever downward to activate the rear wiper spray (for cleaning the glass water). More information about Honda CR-V is as follows: 1. Honda CR-V is a compact SUV with a 1.5T L4 engine and turbocharged intake. 2. The dimensions of this car are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, equipped with a 6-speed manual transmission and front-wheel drive.
9
1
Share

Why Can't the Car Key Be Turned?

Reasons why the car key can't be turned: The car key may not turn because the steering wheel has automatically locked. This is part of the car's automatic anti-theft system. When the vehicle is turned off, the steering lock pin engages with the steering column, preventing the steering wheel from moving. Even if the key is inserted, it cannot be turned. This is a safety feature designed to protect the vehicle. Here are some solutions: If the car key cannot be turned, you can unlock the steering wheel by inserting the mechanical key, pressing the brake pedal, and then gently turning the steering wheel. Although the steering wheel is locked, it can still be moved slightly. While turning the steering wheel, turn the key at the same time to complete the steering wheel unlocking process. At this point, the vehicle can be started normally.
16
5
Share

How to Replace Brake Pads on a Mercedes-Benz C200?

Mercedes-Benz C200 brake pad replacement steps are as follows: 1. Remove the tire. 2. Loosen the caliper fixing screws and remove the caliper. 3. Release the brake pad clips and take out the brake pads. 4. Use large pliers or a specialized piston pushing tool to push the caliper piston back. 5. Install the new brake pads. 6. Secure the clips and reassemble following the original steps. Additional relevant information is as follows: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking is decisively influenced by the brake pads, making high-quality brake pads the protector of both the driver and the vehicle. 2. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.