What are the three suspension modes of the old Touareg?

Can a Cadillac Use 92 Octane Gasoline?

Cadillac cannot use 92 octane gasoline. According to the official vehicle manual recommendation, Cadillac should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, Cadillac owners can also find this information on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high compression ratio engines can also be tuned to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If a Cadillac occasionally uses the wrong gasoline grade, simply switching back to the correct grade after use is sufficient. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane number is significantly lower, the reduced ignition point may cause the gasoline to ignite prematurely during the compression stroke. If combustion occurs before the spark plug fires during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it may only increase noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

12

4

Share

What procedures are required for gas cylinder transfer?

Automobile gas cylinder transfer is generally processed together with used car transfer. The specific details are as follows: 1. Process: The procedure required for used car transfer is that when the vehicle applies for the "oil to gas" service, there should be change filing materials in the motor vehicle file. When the vehicle is transferred, if the materials are complete and valid, the automobile gas cylinder will be transferred together with the vehicle. 2. The materials required for the transfer of a used car gas cylinder (all original copies must be provided) are as follows: (1) "Motor Vehicle Transfer Registration Application Form". (2) The identity certificate and copy of the current motor vehicle owner (a temporary residence permit is also required if the registered residence is not in this city). (3) Proof or voucher of ownership transfer. (4) Motor vehicle registration certificate and driving license. If the motor vehicle license plate number is changed, the original motor vehicle license plate should also be submitted. (5) For motor vehicles under customs supervision, the "Certificate of Release from Supervision of the People's Republic of China Customs Supervision Vehicles" should be provided. (6) If the business is entrusted to be handled, a power of attorney issued by the unit (individual) and the identity certificate and copy of the entrusted person (a temporary residence permit is also required if the registered residence is not in this city) should also be provided. (7) Motor vehicle safety technical inspection certificate and compulsory insurance certificate for traffic accident liability (for motor vehicles exceeding the inspection validity period). (8) Other certificates and vouchers that should be provided as stipulated by laws and regulations.

3

5

Share

Automatic Transmission: Right Foot on Brake or Accelerator?

In an automatic transmission vehicle, the right foot operates the accelerator. Precautions for gear shifting in automatic transmission vehicles: 1. Do not press the accelerator pedal when shifting gears; 2. Do not immediately press the accelerator pedal hard after engaging a gear; 3. The vehicle can only be started in P or N gear; 4. Removing the gear lever from P gear requires pressing the brake pedal; 5. Do not shift into N gear while driving to coast; 6. Do not push into P gear while the vehicle is moving; 7. When changing direction, switching between D and R gears should only be done after the vehicle has come to a complete stop. The gears in an automatic transmission vehicle are: 1. P gear (Parking gear), used for long-term parking of the vehicle; 2. R gear (Reverse gear), engaged when the vehicle needs to move backward; 3. N gear (Neutral gear), engaged when the vehicle is parked for a short time without turning off the engine; 4. D gear (Drive gear), when the gear lever is in D gear, the vehicle automatically shifts gears based on throttle opening and speed data; 5. S gear (Sport mode), makes the vehicle drive more sportily; 6. M gear (Manual mode), when the gear lever is in M gear, shifting is done manually by the driver; 7. L gear (Low gear), used for low-speed driving.

2

5

Share

Why Was the 2021 Geely Vision X3 Discontinued?

Reasons for the discontinuation of the Vision X3: The Geely brand will fully transition to the CMA platform in the coming years, launching six main models (such as the Xingyue, Xingyue L, and Xingrui) based on this platform, while retaining two BMA models and several other non-mainstream products. The Vision X3 and other low-end models were only short-term strategies, and as consumer demand upgrades, such products will gradually phase out of the market. Here are the relevant details: 1. Lack of Competitiveness: With the introduction of the BMA1 and CMA platforms, as well as competitive models like the Borui, Boyue, and Emgrand, consumers have gradually developed an outdated impression of the Vision X3. Coupled with the market downturn caused by its old branding, the Vision X3 will gradually exit the stage. 2. Retained Models: Not all Vision series models have been discontinued. The compact SUV Vision X6, with its affordable price point for a small SUV, has won consumer favor, securing a spot in the top 20 sales rankings for domestic SUVs. Additionally, the newly added 1.4T 6AT powertrain has further enhanced its market competitiveness. This is why the Vision X6 has been retained in the market competition among new products. 3. Replacement Model: According to media reports, the new model replacing the Vision, codenamed SS11, is positioned as an entry-level compact sedan or small car. Its competitive advantages will focus on aspects like cost-performance ratio and size, aiming to capture market share from AO-class sedans.

16

2

Share

How Many Days in Advance Can You Apply for a Driver's License Renewal?

Article 57 of the "Traffic Regulations and Penalty Points Rules": The motor vehicle driver shall apply for a renewal at the vehicle management office of the place where the driver's license was issued or elsewhere within 90 days before the expiration of the motor vehicle driver's license. If the driver's license has expired, the traffic police will impose a fine upon discovery, but no penalty points will be deducted. There is a deadline for renewing the driver's license. If it has been expired for less than one year, you can renew it through the normal process; if it has been expired for one to three years, the license will be canceled, and you can regain it by passing the subject one test; if it has been expired for more than three years, the license will be canceled. Article 57 of the "Traffic Regulations and Penalty Points Rules": The motor vehicle driver shall apply for a renewal at the vehicle management office of the place where the driver's license was issued or elsewhere within 90 days before the expiration of the motor vehicle driver's license. When applying, you should fill out the application form and submit the following documents and proofs: the identity proof of the motor vehicle driver, the motor vehicle driver's license, and a medical certificate of physical condition issued by a county-level or military regiment-level medical institution. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate of physical condition issued by a specialized medical institution designated by the provincial health authority should be submitted. Materials required for renewing the driver's license: original ID card and its copy, a qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white-background color photos, a completed driver's license renewal application form, and the processing fee. Photos and medical examination proofs required for renewal can be brought by yourself. If you are worried that your own documents may not meet the requirements, you can directly handle them at the traffic police department's certification hall to avoid delays. Relevant matters regarding the renewal of an expired driver's license: About renewal: For the annual review and renewal of an expired driver's license, the old driver's license must be surrendered to the vehicle management office. Before renewal, all traffic violations related to the driver's license must be resolved; otherwise, the application will not be accepted. The renewal of a motor vehicle driver's license can be done through the mobile app Traffic Management 12123, or through the vehicle management office, traffic management departments, or public security authorities, effectively renewing the motor vehicle driver's license.

4

Share

What is the difference between Haojue VF100 and VF100E?

VF100 is the carburetor version, while VF100E is the fuel-injected version. Currently, there are no carburetor models available; only the VF100E is offered. Here is some related information about Haojue: 1. Introduction: Haojue Motorcycle is a Chinese famous brand and a well-known trademark in China. It offers over a dozen series and more than a hundred models, with the classic Haojue model—the Leopard series—being a long-standing leader in the domestic motorcycle market. The brand boasts numerous renowned sub-brands, such as Leopard, Lishuang, Disuang, Ruishuang EN, Yueguan, GN Prince, Yinbao, KA Tianlongxing, Neptune, Fuxing, Yuexing, Tianying, Tianyu, Xiyun, Yuzuan, Red Treasure, and the high-performance sports bike GW250 Lichi, all of which enjoy excellent reputations. 2. Development: Haojue motorcycles are highly popular both domestically and internationally, with sales and service outlets covering nearly every large, medium, and small city, county, and major township across China. From the vast landscapes of China to its bustling streets, rural roads, and even farmlands, Haojue users can be seen everywhere. Due to the concentrated user base in many counties, towns, and villages, where most families own Haojue motorcycles, these areas are often referred to as 'Haojue County,' 'Haojue Town,' or 'Haojue Village.'

6

4

Share

What are the three suspension modes of the old Touareg?

Can a Cadillac Use 92 Octane Gasoline?

What procedures are required for gas cylinder transfer?

Automatic Transmission: Right Foot on Brake or Accelerator?

Why Was the 2021 Geely Vision X3 Discontinued?

How Many Days in Advance Can You Apply for a Driver's License Renewal?

What is the difference between Haojue VF100 and VF100E?

What is the highway fuel consumption of the Tank 300?

Steps to Use the Audi A4L Navigation System?

What does autohold mean on a car?

Where is the clutch pedal located?