···
Log in / Register

What are the three mirrors on a car called?

1 Answers
MacIvan
07/29/2025, 02:48 AM

Left side mirror, center rearview mirror, right side mirror. Here are the detailed instructions: 1. Reversing: Pay attention to both sides of the car when reversing and observe the reversing situation. Before reversing, ensure the side mirrors are properly positioned, hold the steering wheel firmly with both hands, and then proceed to observe the mirrors from a conventional angle. Adjust your seating position until you achieve the maximum field of view. Engage reverse gear, adjust the rearview mirror angle, and follow this sequence when reversing. 2. Parallel parking: During parallel parking, ensure the car body is parallel to the edge line of the parking space before stopping. When the car body is straightened, try to reverse in a straight line. For beginners, it's helpful to note the time or number of wheel rotations when fully reversing into the parking space for future reference.

Was this review help?
20
5
Share
More Forum Discussions

What is the reason why the Chery windshield defogging button cannot be turned off?

If it cannot be turned off, the switch may be damaged. It is recommended to check at a 4S shop whether the switch is internally damaged or if there is a short circuit in the wiring. Below are the reasons for car window fogging: 1. Reason one: When the air humidity is constant, if the window temperature is lower than the dew point temperature, condensation will form on the window surface, which is the commonly seen phenomenon of fogging on the front windshield. 2. Reason two: When there is a certain temperature difference on both sides of the window, and the saturated vapor pressure of water on the surface with lower temperature is lower than the surrounding environment's vapor pressure, water vapor will gather on the glass surface, forming tiny water droplets that seep out and create fog. If the dew point temperature is above zero degrees Celsius, fogging occurs; if it is below zero degrees Celsius, frost forms.
1
4
Share

Is Tianjin GS Battery the Original Battery for Toyota Vehicles?

Tianjin GS Battery is the original battery for Toyota vehicles. Relevant information about Toyota is as follows: 1. Introduction: Toyota Motor Corporation (English: Toyota Motor Corporation) is a Japanese multinational automobile manufacturer listed on the Tokyo Stock Exchange (TYO), Nagoya Stock Exchange (NAG), New York Stock Exchange (NYSE), and London Stock Exchange (LSE). Its headquarters are located in Toyota City, Aichi Prefecture, Japan, and Bunkyo Ward, Tokyo. 2. Meaning of the Logo: Toyota's three-ellipse logo has been in use since the early 1990s. The large ellipse in the logo represents the Earth, while the two vertically combined ellipses forming a 'T' in the middle represent Toyota. It symbolizes Toyota's foundation in the future, its confidence and ambition, as well as its commitment to customers, ensuring a mutual trust between the hearts of users and the automaker. It also signifies Toyota's advanced technology and innovative potential.
15
2
Share

What does the autohold light mean?

autohold light on means automatic parking, here is an extended introduction: 1. Introduction to autohold: autohold refers to the car's automatic parking system, which can only be activated when the seat belt is fastened. After activation, the vehicle will automatically activate four-wheel braking when stopping at a red light or on a slope, equivalent to not needing to pull the handbrake, and the car will always remain stationary. To release the stationary state, just lightly press the accelerator to release the brake. 2. Function introduction of autohold: 1) Short stops such as encountering a red light while driving. The system will automatically brake the wheels after the vehicle stops to prevent rolling. This eliminates the need for the driver to constantly think about pulling the handbrake. When the light turns green, simply press the accelerator to start, and the system will automatically release the wheels. 2) Starting on a slope. The function is similar to the previous point. When starting on a slope, the system will automatically brake to prevent rolling backward. When the traction force reaches the level needed to move up the slope, the system will automatically release the wheels and move forward directly. 3) No need to pull the handbrake when parking and locking. The system will automatically brake the wheels at this time, but the third function is not available in some models, and manual handbrake is still required when parking.
9
2
Share

What is the torque specification for the cylinder head bolts of the EA888 engine?

90N is the approximate torque value for the cylinder head bolts of the EA888 engine. The EA888 engine is a design by Volkswagen, integrating advanced technologies such as direct fuel injection, turbocharging, and variable valve timing, achieving a balance between power, economy, and environmental friendliness. It is installed in various models under the Volkswagen brand, including the Magotan, CC, Tiguan, Passat, and the Audi Q5. Cylinder head with valve lift switching function: The EA888 engine features a newly developed cylinder head that integrates the exhaust manifold into the cylinder head. This allows for exhaust gas recirculation cooling to occur within the cylinder head, with the exhaust gases flowing inside it. The intake and exhaust camshafts have variable valve timing functionality. The exhaust camshaft also has a valve lift switching function, enabling the valves to open and close on two different cam profiles. The EA888 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power output of 118kW (160PS) at 5000-6200rpm and a maximum torque of 250Nm at 1500-4500rpm. The 2.0TSI can achieve a maximum power of 147kW (200PS) at 5100-6000rpm and a maximum torque of 280Nm at 1700-5000rpm. The mechanical structures of these two displacement engines are fundamentally the same, with the main differences being the length of the connecting rods between the crankshaft and pistons. The 2.0TSI has shorter connecting rods than the 1.8TSI, with an increased crankshaft radius to enhance displacement. Additionally, the piston top structures differ slightly, primarily to adjust the working volume of the combustion chamber, ensuring a consistent compression ratio and achieving the same combustion effect.
4
3
Share

What is the reason for the lack of airflow from the rear vents in the new RAV4?

New RAV4 rear vents not blowing air may be caused by air leaks or issues with the cabin air filter. Presence of air leaks: There may be air leaks at the connection between the evaporator case and the air ducts. If there are air leaks at the connection between the evaporator case and the air ducts, the cold air that should be released from the rear air vents continuously escapes from the leak points, resulting in no airflow from the rear vents. Issues with the cabin air filter: The cabin air filter is located at the intake of the blower motor. All cold or hot air blown out by the car's air conditioning system must pass through the cabin air filter. However, the cabin air filter is prone to accumulating dirt. If the owner does not replace the cabin air filter in time, a large amount of debris can easily accumulate on the filter. This debris naturally reduces the airflow passing through the cabin air filter, leading to no airflow from the rear vents.
6
4
Share

Where is the rear wiper switch of Wuling Hongguang?

The rear wiper control lever of Wuling Hongguang is located on the right side behind the steering wheel. Push the entire lever forward one gear to activate the rear wiper. Additional information: 1. Types of wipers: One is the traditional intermittent type, which requires the driver to adjust according to the rain intensity and visibility conditions; the other is the sensor-activated automatic wiper, commonly used in high-end cars. 2. Precautions for using wipers: (1) When using the wiper to remove dust from the windshield on sunny days, always spray glass cleaner and avoid dry wiping. (2) If there are stubborn or hard contaminants on the glass, clean them manually. These substances can easily damage the wiper blade, causing the wiper to not clean effectively. (3) If the contaminants on the wiper are difficult to remove or the wiper itself has issues, it is best to seek professional repair promptly.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.