What are the Three Guarantees for 4S Car Tires?

Is the power of the GLB200 sufficient?

The power of the Mercedes-Benz GLB200 1.3T is sufficient, equipped with a 1.6T all-aluminum direct-injection turbocharged engine delivering a maximum horsepower of 156ps. The technology is relatively advanced, and it comes with a 7-speed dual-clutch transmission, with a combined fuel consumption of around 10.1 liters. Below are the relevant details: 1. Exterior: Although it is a compact SUV, the front still features the large star emblem, highlighting its luxurious, grand, and dynamic appeal. The hollowed-out grille is a distinctive Mercedes-Benz feature with high recognition, complemented perfectly by LED headlights. The design of the taillights and dual exhaust pipes also carries the Mercedes-Benz DNA. 2. Interior: The dual-barrel instrument cluster and Mercedes-patented air vents exude a luxurious feel. The center console screen is a floating tablet but uses mechanical knobs as function keys, allowing all functions to be controlled with a single press, which is much safer than touch-sensitive buttons. The interior materials are of high quality with exquisite craftsmanship, and the overall design is simple, clean, and practical, showcasing technological advancement. 3. Space: The front seats are fully adequate, but the rear seats are slightly cramped, and the backrest angle is not adjustable. However, the column shifter is satisfactory, offering both a high-tech feel and space-saving benefits.

15

0

Share

What does 'AC off to protect the engine' mean?

When a car displays the message 'AC off to protect the engine', it indicates an automatic protection mechanism triggered by starting the vehicle without turning off the air conditioning. During startup, the engine requires a significant instantaneous current, and having the AC on consumes additional current. Simultaneously, the starter motor also bears the extra load from the AC compressor, which can cause substantial damage to the motor. Avoid turning off the engine before switching off the AC. Doing so harms the engine because the next startup will occur with the AC's load, imposing high stress that may damage the engine. Turn off the AC appropriately when necessary. During driving, situations like prolonged traffic jams or waiting may arise. Keeping the AC on while the engine idles for extended periods leads to incomplete fuel combustion, producing high concentrations of carbon monoxide. If surrounding airflow is poor, this exhaust gas may enter the cabin, posing a poisoning risk to occupants. Pointing vents upward cools faster. In summer, directing cool air upward accelerates cabin cooling. Conversely in winter, aiming warm air downward speeds up heating. This principle works because hot air rises, making this method highly fuel-efficient.

7

2

Share

How to spray windshield washer fluid and which button to use?

Here is the relevant introduction on how to spray windshield washer fluid and which button to use: 1. Windshield washer fluid button switch: Generally located on the right-hand control stalk of the steering wheel. The design of the stalk may vary between different car models, but the operation to spray the washer fluid is basically the same. 2. Pull the stalk switch toward yourself: This will spray the windshield washer fluid. While the fluid is being sprayed, the wipers will automatically activate to clean the windshield until you release the stalk to stop the operation. 3. Notes: When operating the windshield washer switch, if the fluid does not spray after pulling the stalk, do not hold the stalk for an extended period. Otherwise, it may cause the motor to overheat and malfunction.

9

3

Share

At what temperature does the BMW 320 thermostat open?

BMW 320's thermostat generally starts to open automatically when the temperature at the engine's coolant inlet reaches 103 degrees Celsius, without requiring DME control. Working principle of the thermostat: The commonly used thermostat is a wax-type thermostat. When the coolant temperature is below the specified value, the refined paraffin in the thermostat's temperature-sensing body remains solid, and the thermostat valve closes the passage between the engine and the radiator under the action of the spring. The coolant returns to the engine via the water pump, performing a small circulation within the engine. When the coolant temperature reaches the specified value, the paraffin begins to melt and gradually turns into a liquid, increasing in volume and compressing the rubber tube, causing it to contract. As the rubber tube contracts, it exerts an upward thrust on the push rod, which in turn exerts a downward counter-thrust on the valve, causing it to open. At this point, the coolant flows through the radiator and the thermostat valve, then returns to the engine via the water pump, performing a large circulation. Signs of a damaged thermostat: If coolant continues to flow out from the upper water chamber inlet pipe of the radiator when the engine starts cold, it indicates that the main valve of the thermostat cannot close. If there is no coolant flowing out from the upper water chamber inlet pipe of the radiator when the engine coolant temperature exceeds 70 degrees Celsius, it indicates that the main valve of the thermostat cannot open normally, and repair is needed at this time.

11

1

Share

How to Match a Car Remote Key?

Go to a 4S shop or a professional car lock company for matching. The basic components of a remote key are as follows: 1. Transmitter: Composed of a transmission switch, transmission antenna, integrated circuit, etc., containing an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery on the opposite side of the circuit. The transmission frequency uses radio waves, and the transmission switch button sends a signal once each time it is pressed; 2. Receiver: After the transmitter sends the identification code using shortwave modulation, it is received by the car's shortwave antenna, and then enters the shortwave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation, and is compared with the demodulator's identification code.

9

0

Share

Regulations on New Vehicle License Plate Registration Time?

There is no specific regulation on the time for new vehicle license plate registration, but temporary license plates or formal registration must be obtained before the vehicle can be driven on the road. The details are as follows: 1. Temporary driving within the administrative jurisdiction: For vehicle owners who have obtained a motor vehicle but have not yet registered it and need to drive temporarily within the administrative jurisdiction, temporary license plates with a validity period of no more than 15 days will be issued. 2. Temporary driving across administrative jurisdictions: For those who need to drive temporarily across administrative jurisdictions, temporary license plates with a validity period of no more than 30 days will be issued. If the vehicle owner needs to apply for temporary license plates multiple times, the vehicle management office may issue temporary license plates no more than three times.

10

3

Share

What are the Three Guarantees for 4S Car Tires?

Is the power of the GLB200 sufficient?

What does 'AC off to protect the engine' mean?

How to spray windshield washer fluid and which button to use?

At what temperature does the BMW 320 thermostat open?

How to Match a Car Remote Key?

Regulations on New Vehicle License Plate Registration Time?

Is Castrol Magnetec 5W40 Suitable for Lavida?

How is the battery life of BYD DM-i Super Hybrid?

What to Do If Your Car Is Vandalized with Scratches?

What is the fuel tank capacity of the Enclave?