What are the test items for upgrading from C1 to B2 license?

1 Answers
DelaneyMarie
07/29/25 9:47pm
C1 license upgrading to B2 license includes the following test items: Upgrading from C1 to B2 requires retaking all tests starting from Subject 1. The contents of Subject 1, Subject 3, and Subject 4 remain unchanged, which are theoretical test, road test, and safe civilized driving test respectively. As for Subject 2, it includes: pole test, slope fixed-point parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, narrow gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnel driving, rain (fog) weather driving, slippery road driving, and emergency situation handling. C1 driver's license: The C1 driver's license is one type of motor vehicle driving license. The permitted driving scope of C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles; small passenger vehicles with seating capacity ≤9 persons. Application age: The minimum age limit for C1 license is 18 years old, with no upper age limit. However, applicants over 70 years old must pass tests on memory, judgment ability, and reaction capability.
Was this review help?
19
2
Share
More Forum Discussions

At what temperature does the Toyota Vios thermostat open?

Toyota Vios thermostat opens at 70 degrees. The thermostat is a valve that controls the flow path of coolant, serving as an automatic temperature-regulating device. It typically contains a temperature-sensing component that uses thermal expansion or contraction to open or close the flow of air, gas, or liquid. The steps for replacing the thermostat are as follows: 1. Turn off the engine and open the front hood. Disconnect the negative terminal of the battery to prevent the electric fan from suddenly operating during work, which could cause personal injury. 2. Remove the plastic cover outside the timing belt. 3. The position of the generator may affect the replacement of the thermostat, so the generator assembly needs to be removed. 4. Place a water tray under the car, then prepare to remove the water pipe and wait for the antifreeze to drain completely. 5. Remove the faulty thermostat and install the new one. After installing the thermostat, apply a layer of sealant to the water pipe area. Reinstall the removed water pipe, generator, and timing plastic cover to their original positions. Reconnect the negative terminal of the battery, add new antifreeze, and then start the car for testing.
20
0
Share

What Causes the Steering Wheel to Pull to One Side While Driving?

Steering wheel pull while driving can be caused by tire tread patterns, tire pressure, front shock absorber springs, and other factors. Below are the specific reasons: 1. Different tread patterns on the left and right tires or uneven tread depth. The entire vehicle should use the same type of tires, and the tread depth must be consistent. If the tread exceeds the wear limit, the tires must be replaced. 2. Unequal tire pressure on both sides. Uneven tire pressure will cause the tires to differ in size, inevitably leading to pulling while rolling. 3. Deformation of the front shock absorber springs, resulting in inconsistent damping on both sides. The condition of the shock absorber springs can be judged by pressing down or comparing after removal. 4. Failure of the front shock absorbers. When the front shock absorbers fail, the suspension on both sides will be uneven in height while driving, leading to uneven force distribution and pulling. A dedicated shock absorber tester can be used to measure the absorption rate and determine the condition of the shock absorbers for timely repairs. 5. Excessive wear or abnormal gaps in the vehicle's chassis components. Common parts prone to excessive gaps include the steering linkage ball joints, control arm bushings, and stabilizer bar bushings. The vehicle should be lifted for a thorough inspection.
6
1
Share

Which is more durable, Dimension White or Arctic White?

Arctic White is more durable. If a small area is scratched, you can just repaint the scratched area as long as the color difference is minimal. However, with Dimension White, the entire panel must be repainted. In terms of both the cost-effectiveness of touch-up paint and the car's resale value, Arctic White is the better choice. Of course, Dimension White is truly more visually appealing than Arctic White, especially under sunlight where it sparkles. Below are the hazards of not washing your car for a long time: 1. Increased fuel consumption: Dust or debris that falls on the car will accumulate over time, adding weight to the vehicle. Additionally, dust may enter various systems of the car, leading to higher fuel consumption. 2. Damage to the paint: Rain can cause oils from the dust to adhere to the car's paint, forming a layer of grime. Over time, this grime can cause damage to the underlying paint. Moreover, in some industrial areas, rainwater has higher acidity, and prolonged exposure to such acid rain can lead to paint oxidation and corrosion. 3. Increased maintenance costs: Washing your car every two weeks or once a month helps protect the paint and keeps it looking good. If you neglect washing your car for an extended period, the paint may get damaged, and repairing it will cost significantly more.
16
1
Share

How to Read the Oil Dipstick on Wuling Zhiguang?

Introduction to reading the oil dipstick on Wuling Zhiguang: Unscrew the oil dipstick of the Wuling Zhiguang, wipe it clean with a soft cloth, then reinsert and remove it. There is an upper limit and a lower limit at the end of the dipstick. If the oil level is between these two marks, the oil quantity is just right. If the oil does not reach the lower limit, it means the oil is insufficient. If the oil level exceeds the upper limit, it indicates overfilling. Below is some related information about the oil dipstick: 1. The function of the oil dipstick is to measure the static oil level height, reflecting whether the engine oil level is within a reasonable range. Standard dipsticks have clear upper and lower limits; as long as the measured oil level is between these marks, it is acceptable. 2. More oil is not necessarily better. A higher oil level actually increases engine resistance because the crankshaft continuously agitates the oil in the oil pan for splash lubrication. Ideally, the oil level should be slightly below the middle mark, where engine resistance and fuel consumption are minimized while maintaining stable lubrication performance. 3. When checking the oil dipstick, ensure that all four wheels of the car are on the same level ground, meaning there should be no tilt in any direction. This is because any tilt in the car body will change the oil level in the oil pan, leading to inaccurate measurements.
19
3
Share

Does the Magotan have an automatic window roll-up feature when locking the car?

The Magotan does not have an automatic window roll-up feature when locking the car. You need to long-press the lock button on the key to roll up the windows. The automatic window roll-up system when locking the car is designed to automatically close all windows after locking without altering the original car wiring or affecting any original functions. It uses dedicated plug-and-play connectors, imported original car wires, and independently developed host technology to achieve this function. Methods to set up the automatic window roll-up when locking the car: 1. For models with a one-touch window roll-up feature when locking: Find the vehicle settings option in the central multimedia screen and enable the lock-and-roll-up function. If this option is not available in the multimedia screen, you can also use the multifunction steering wheel to access the settings in the instrument cluster and enable the feature. 2. For models with a hidden lock-and-roll-up feature: Activate it by long-pressing the lock button for 5 seconds or by using a hidden feature activation tool. Long-pressing the lock button can be done manually. If the one-touch window roll-up feature does not work after long-pressing the lock button, you will need to visit a repair shop to have it configured using specialized equipment. 3. For models without the lock-and-roll-up feature: These models completely lack the one-touch window roll-up function when locking, so it can only be achieved by modifying the wiring or installing an additional module.
11
2
Share

Is the Lavida XT the Same as the Santana?

Lavida XT and Santana are not the same. The Lavida XT, also known as the second-generation Lavida, is a sedan produced by Shanghai Volkswagen. It embodies a new design DNA—"fusion"—while continuing the "dynamic and stylish" theme of the A-segment car market. The Santana, on the other hand, is a brand of cars produced by Volkswagen in California, USA. The specific differences are as follows: 1. Exterior: The Lavida XT has a more youthful appearance, while the Santana lacks many highlights and has a simpler overall design. 2. Interior: The Lavida XT offers two color schemes—all-black and black/brown—and is equipped with features like the ESP electronic stability system and RKA intelligent tire pressure monitoring. The Santana's interior focuses on simplicity and restraint, with some differences in configuration compared to the Lavida XT. 3. Powertrain: The Lavida XT is powered by the EA211 series all-aluminum 1.5L naturally aspirated engine, with options for a 5MT or 6AT automatic transmission. The Santana is equipped with EA211 engines in 1.4L and 1.6L displacements, paired with a 5-speed manual or 6-speed Tiptronic automatic transmission.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.