What are the test items for the C2 license subject 2 exam?

2 Answers
VanJosephine
07/29/25 2:15am
C2 subject 2 exam items include: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Below are the details for subject 2: 1. Reversing into a garage: This assesses the driver's ability to maneuver the vehicle in a confined space. Reversing into a garage is a key evaluation point in the driver's test, requiring the driver to correctly reverse the vehicle into the garage from both sides while in motion. 2. Parallel parking: Parallel parking is increasingly common in urban areas, especially as parking spaces in formal lots become scarce. Many areas now designate street-side spaces as 'parallel parking spots.' 3. Stopping and starting on a slope: This is another key evaluation point in subject 2. The test requires stopping at a fixed position on a slope with ≥10% gradient and ≥30 meters in length, assessing the coordination of steering, braking, and clutch control. The goal is to train drivers to accurately judge vehicle positioning and correctly use the brake, gear, and clutch for stopping and starting on uphill sections. 4. Right-angle turns: This evaluates the driver's ability to correctly steer and judge the difference between the inner and outer wheels when navigating sharp turns. The driver should engage first gear, release the handbrake, and slowly lift the clutch to maintain semi-clutch engagement while moving forward at a steady speed. The left wiper's left dot (first rivet) should align with the yellow line on the right edge of the road, maintaining a 20 cm distance. Then, focus on a point slightly ahead of the middle door lock on the left front door. 5. Curve driving: Commonly known as the S-curve, this test requires driving on an S-shaped road of specified width without crossing the edge lines, demonstrating smooth steering control. It assesses the driver's ability to steer and control the vehicle through curves, aiming to develop skills in steering application and wheel trajectory management.
Was this review help?
7
4
Share
LaGage
08/12/25 6:14am
I remember when taking the C-license Subject 2 test, there were five main items to pass. Reversing into a parking space is fundamental, requiring precise backing without crossing the lines; parallel parking simulates roadside parking, needing judgment of wheel positions; hill start and stop tests pedal sensitivity, as poor clutch control can easily stall the car; curve driving is like navigating a serpentine path, requiring steady steering; and right-angle turns demand careful timing to avoid hitting the corner lines. I practiced a lot at the driving school, with hill starts giving me the most trouble—I was always worried about the car rolling back. The instructor always said to take it slow and keep a calm mindset. Practice makes perfect, and during the test, checking seat belts and mirror adjustments is crucial. These skills are especially practical for daily driving, like reversing into parking spaces at malls. I think Subject 2 tests patience and attention to detail—don’t rush, just take it step by step.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What is metallic car paint?

Metallic car paint refers to an automotive coating formulated with metal powders such as copper or aluminum as pigments. This type of paint incorporates metallic particles into the paint mixture, giving the painted panel surface a sparkling appearance. Under different viewing angles, the refraction of light causes variations in the vehicle's color and contours. Methods for maintaining automotive paint include: 1. Promptly remove dust from the vehicle body to minimize static electricity's attraction of dust; 2. Rinse rain stains with clean water as soon as possible after rainfall to prevent paint damage; 3. Avoid washing the vehicle under direct sunlight or high temperatures; 4. Use clean, soft cloths or sponges when cleaning to prevent mixing in metal shavings or sand particles that could leave scratches.
8
3
Share

What are the body dimensions of the BMW 3 Series?

The body dimensions of the BMW 3 Series are: length 4719mm, width 1827mm, height 1459mm, with a wheelbase of 2851mm. The BMW 3 Series models include: BMW 320i, BMW 325iM, BMW 320LiM, BMW 325Li xDrive M, BMW 320Li, etc. Taking the 2021 BMW 320i as an example, it is a mid-size car with a fuel tank capacity of 59L. The 2021 BMW 320i is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 250Nm, and a maximum power of 115kW, paired with an 8-speed automatic transmission.
20
4
Share

What is the size of the Baojun e100 windshield?

The size of the Baojun e100 windshield is 124 cm in width and 75 cm in height. Classification of automotive windshields: Automotive windshields mainly include laminated glass, tempered glass, zone-tempered glass, laminated tempered glass, and laminated zone-tempered glass. Laminated glass refers to a type of glass where a transparent adhesive plastic film is placed between two or three layers of glass, combining the toughness of the plastic with the hardness of the glass, thereby enhancing the glass's resistance to breakage. Regulations on automotive windshield size: The length-to-width ratio of the glass must not exceed 2.5. According to the national industry standard JC433-91, the thickness of wired glass is divided into: 6, 7, and 10 mm, with standard dimensions generally not less than 600mm × 400mm and not exceeding 2000mm × 1200mm.
10
2
Share

How many cylinders does the Lingpai 1.8 engine have?

The Lingpai 1.8-liter naturally aspirated engine is a four-cylinder engine, and models equipped with this engine have been discontinued. Here are some details about the Lingpai: 1. The Lingpai's 1.8-liter naturally aspirated engine delivers 136 horsepower and a maximum torque of 169 Nm. This engine can output maximum power at 6,500 rpm and maximum torque at 4,300 rpm. 2. This engine features i-VTEC technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 3. The Lingpai uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. Compact cars typically use torsion beam non-independent suspensions for the rear. The torsion beam suspension is compact, simple in structure, and occupies minimal space.
11
3
Share

When to Use the N Gear?

N gear is the neutral gear, which can be engaged during prolonged idling. Additionally, the N gear plays an indispensable role when parking. Below are the scenarios for using the N gear in an automatic transmission car: 1. Starting the vehicle: Shift into N gear, start the vehicle, then shift to D or R gear, release the handbrake, and slowly release the brake. Note that when starting the car, always observe the surroundings to ensure safety before releasing the brake. 2. Parking: Press the brake, shift into N gear, engage the handbrake, shift to P gear, and turn off the engine. If on a slope, the third step is to first engage the handbrake, then release the foot brake, turn off the engine, and finally shift to P gear. In summary, ensure the car is completely stopped or firmly stabilized with the handbrake before shifting to P gear and turning off the engine.
5
2
Share

Can a vehicle be driven during the transfer process for out-of-town relocation?

Can a vehicle be driven during the transfer process for out-of-town relocation? The answer is yes. Below is relevant information about vehicle transfer procedures: 1. Concept: For vehicles applying for transfer registration, the owner must complete an application form, present the vehicle for inspection, and submit required documents and proofs. 2. Transfer process: Obtain a used car transaction invoice, take rubbings of the chassis and engine numbers (for invisible numbers, get rubbings done at a repair shop), remove license plates for photography, verify records at the archives office, conduct vehicle inspection, process at the DMV office, and package the DMV archives ("major records"). When ownership of a registered vehicle is transferred, the new owner must apply for transfer registration at the local vehicle management office within 30 days from the date of vehicle delivery.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.