What are the test items for the automatic transmission driving test (Subject 3)?
2 Answers
Driving school automatic transmission Subject 3 test items include: vehicle preparation, starting, straight-line driving, gear shifting operations, lane changing, pulling over, passing through intersections straight, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Test items and precautions: Adjust the seat and rearview mirror before getting in the car, check if the brakes and acceleration are normal. For left and right turns and U-turns (do not move the steering wheel within three seconds of turning on the turn signal, and ensure the speed matches the gear). When passing bus stops, pedestrian crossings, and school zones (speed should not exceed 30 km/h, and look left and right to check for pedestrians). Gear shifting operations (complete gear shifting within the specified time and distance). Lane changing and overtaking (do not turn the steering wheel within three seconds of turning on the turn signal, and complete within the specified time and distance). Straight-line driving (speed should not be lower than 40 km/h, steering wheel movement should not exceed three degrees, and complete within the specified distance). Passing through traffic lights (stop and wait at red lights, and always use first gear when starting after stopping). Pulling over (choose an appropriate spot to pull over within the specified distance). The Subject 3 test includes road driving skills and safe and civilized driving knowledge, both with a full score of 100, and passing scores of 80 and 90 respectively. Automatic transmission is easier than manual transmission because it only requires the D gear, and you just need to press the accelerator or brake. However, both manual and automatic transmissions are unfamiliar to beginners, and both require diligent practice to master the essence of the test. Without sufficient practice, even an automatic transmission vehicle cannot pass the test.
The automatic transmission subject three test mainly assesses practical road driving skills, which I just passed last month. The test starts with a lighting simulation, such as using low beams for oncoming vehicles and turning on fog lights in foggy conditions. Then, when starting, you must use the turn signal and check the rearview mirror. After the car moves, the test evaluates straight-line driving, requiring steady steering to avoid deviation. Lane changing and overtaking are also key points—you need to signal in advance and observe traffic conditions. When encountering pedestrian crossings or school zones, you must slow down to below 30 km/h, as this is an area where points are easily deducted. Finally, pulling over is particularly crucial; the wheels must be within 30 cm of the curb. Throughout the test, avoid crossing solid lines and running red lights, as the examiner will focus on safety awareness and standardized operations. Remember to adjust the seat and mirrors before starting, as these small details also matter.
