What are the test items for Subject 3 in Beijing?
2 Answers
Beijing Subject 3 driving test includes the following items: vehicle preparation, night driving, starting and turning around, driving straight through intersections, turning left at intersections, passing bus stops, gear shifting operations, meeting oncoming vehicles, overtaking, changing lanes, passing pedestrian crossings, passing school zones, and pulling over. Below are some precautions for the Subject 3 test: 1. Clutch pedal: Only use it when starting, shifting up, shifting down, or stopping. Do not press the clutch during normal driving. When slightly slowing down for situations, only use the brake pedal to avoid coasting in neutral. 2. Accelerator pedal: The traffic light will flash several times before changing from green to red. Depending on the distance to the intersection and vehicle speed, press the accelerator if the distance is short and the speed hasn't decreased enough. 3. Straightening and parking: Upon hearing the instruction and assessing the road condition, if there are no solid lines or you're too close to the intersection, quickly turn on the right signal, check the rearview mirror, brake to slow down and merge. When the vehicle reaches the middle-right position of the road, turn the steering wheel left, and when the vehicle can coast straight by inertia, press the clutch. When the vehicle is straight, turn the steering wheel right to align and park.
I just took the driving test (Subject 3) in Beijing a few days ago, and the whole process was quite nerve-wracking. The test content includes pre-driving preparations such as adjusting the seat, mirrors, and fastening the seatbelt, which the examiner will check. Then comes the starting part—you need to start smoothly without stalling or jerking. Next is driving in a straight line, maintaining a straight path without deviation on the designated road section. Changing lanes is also crucial: signal first, then check the mirrors and blind spots to ensure safety before switching lanes. At intersections, you must slow down, yield to traffic signals, and prioritize pedestrians. Near school zones or bus stops, you must decelerate, stop, and observe. Overtaking is only allowed in designated sections with proper signaling. Making a U-turn is another task—find a suitable spot to execute it. Finally, pull over accurately to the specified spot. If it’s a night test, you’ll also be tested on headlight and turn signal usage. During my test, I made a small mistake—forgot to check the blind spot while changing lanes, which cost me points. So, I recommend practicing real-road simulations more often to avoid anxiety. Passing means you’re qualified to get your driver’s license.
