What are the test items for Subject 2 in Beijing?

1 Answers
JourneyFitz
07/30/25 3:23am
The test items for small vehicles (C1, C2) include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope (canceled for C2), turning at a right angle, and driving through curves (commonly known as S-curves). Some regions also include a sixth item: highway card collection. The test items for large vehicles (A1, A2, A3, B1, B2) include: stake test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, driving through curves, turning at a right angle, passing through a narrow gate, driving over continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, as well as simulated scenarios such as highways, continuous sharp turns on mountain roads, tunnels, rainy (foggy) weather, slippery roads, and emergency handling. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants applying for large passenger vehicles, trailers, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. Candidates who fail the Subject 2 test can retake it once. If they do not take the retest or fail the retest, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 (road driving skills) cannot exceed five times. If the fifth scheduled test is still failed, the passing scores of other subjects will be invalidated.
Was this review help?
4
1
Share
More Forum Discussions

What does zero tire pressure continued driving mean?

The meaning of zero tire pressure continued driving is run-flat tires. The following are the advantages and disadvantages of run-flat tires: 1. Advantages of run-flat tires: (1) Relatively higher safety. When a tire blows out or loses pressure, it will not deform severely and can continue to drive for up to 300km without air. (2) Increases trunk space. After a tire blowout, it can continue to drive for a certain distance, acting as a spare tire. 2. Disadvantages of run-flat tires: (1) High cost. The use and maintenance costs are higher than ordinary tires. (2) Poor comfort. The tire walls are thick and hard, resulting in greater tire noise. (3) High fuel consumption. Run-flat tires are heavier than ordinary tires.
4
4
Share

Which brand does the Qashqai belong to?

Qashqai is an SUV model launched under the Nissan automobile brand. More information about the Qashqai is as follows: 1. The Qashqai is the first product developed by Nissan's European Design Center. Its name originates from the nomadic tribes living in the desert regions of Iran, meaning "urban nomad," and it is positioned between a compact SUV and a hatchback. 2. The Qashqai is equipped with Nissan's newly developed 1.2-liter turbocharged gasoline engine, with peak horsepower and torque outputs reaching 113bhp and 190Nm respectively.
13
2
Share

What are the simple solutions for an inaccurate fuel gauge?

An inaccurate fuel gauge can be resolved by cleaning the fuel level sensor and choosing higher-quality gasoline. Additionally, regular cleaning of the fuel system and fuel tank is recommended. Clean gasoline reduces impurities in the fuel pump, significantly lowering the probability of fuel gauge malfunctions. Symptoms and causes of an inaccurate fuel gauge: 1. The fuel gauge needle moves inconsistently: This is a common issue, typically observed when the fuel gauge needle drops slowly in the first half but accelerates after passing the midpoint. However, this inconsistent movement is not necessarily a malfunction; it is related to the design of the fuel pump, which cannot uniformly reflect fuel consumption due to the difficulty in achieving a consistent rate of change, and cannot be altered by repairs or part replacements. 2. The fuel gauge suddenly drops to zero: The fuel gauge's indication depends on the fuel level sensor. This situation indicates a problem with the vehicle's fuel level sensor, likely due to contamination that wasn't cleaned promptly. Gasoline contains many impurities, and prolonged immersion of the fuel level sensor can lead to contamination, directly affecting the accuracy of the readings. 3. The fuel gauge reading increases: This occurs when the linkage between the fuel level sensor and the float gets stuck, preventing the float from moving up and down normally. As a result, the fuel level sensor doesn't change, causing the fuel gauge needle to remain fixed at a certain position.
1
3
Share

What do the car's internal and external circulation mean?

Air is circulated internally by the blower moving the air inside the car, while external circulation involves airflow entering the blower through wind pressure or air ducts. The two circulation modes are used as follows: 1. External circulation usage: (1) After purchasing a new car, turn on the external circulation to allow harmful gases inside the car to volatilize and dissipate. (2) When driving on the highway for extended periods, turn on the external circulation to replenish oxygen inside the car. 2. Internal circulation usage: (1) During traffic jams when exhaust fumes are dense, turn on the internal circulation to prevent outside exhaust from entering the car. (2) In sandy or dusty weather, turn on the internal circulation to prevent outside dust from entering and reduce the impact of sand on the air filter.
7
4
Share

What is the ground clearance of the Q7?

Audi Q7's minimum ground clearance is 201mm. The body dimensions of the Audi Q7 are 5086mm in length, 1983mm in width, and 1737mm in height, with a wheelbase of 3002mm. The greater the minimum ground clearance of a vehicle, the better its off-road capability. Conversely, the smaller the ground clearance, the worse the vehicle's off-road performance. Relevant details are as follows: 1. The Audi Q7 is positioned as a mid-to-large SUV, so its ground clearance is relatively higher compared to other models. 2. The minimum ground clearance of a vehicle refers to the clearance when the vehicle is fully loaded. 3. The minimum ground clearance of a vehicle affects its off-road capability.
3
2
Share

What is the best position for engine oil to reach on the dipstick?

Engine oil should be added to about three-quarters of the way between the upper and lower marks on the dipstick, which means slightly above the middle within the dipstick's range. Below is a standard image for measuring engine oil level, which should always be within the upper and lower limits of the dipstick. Before checking the dipstick, ensure the car is on a level surface. Since the oil pan is usually irregularly shaped, if the vehicle is tilted, the oil in the pan will flow to the lowest point while the dipstick position remains unchanged, leading to inaccurate oil level measurements. Both excessive and insufficient engine oil can negatively impact the engine. Too much oil increases oil pressure, causing some oil to seep into the combustion chamber through component gaps, leading to oil burning. This can result in incomplete combustion in the combustion chamber, producing more carbon deposits. Insufficient oil, on the other hand, leads to inadequate lubrication of engine components, increasing friction and wear. Additionally, engine oil plays a crucial role in cooling and heat dissipation. If oil levels are too low, the engine's cooling capacity decreases, causing internal overheating. This can further lead to bearing wear, cylinder scoring, and other issues. Drivers may experience symptoms like reduced power and excessive oil consumption during operation.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.