···
Log in / Register

What are the test items for C2 Subject 3?

5 Answers
LaAlessandra
07/29/25 3:20am

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", the C2 Subject 3 test items include: preparation for getting on the car, starting, driving in a straight line, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. C2 permitted vehicle types: According to the "Permitted Vehicle Types and Codes", a C2 driver's license allows driving small and micro automatic transmission passenger cars, as well as light and micro automatic transmission cargo vehicles. It also includes light and micro automatic transmission special-purpose vehicles and small automatic transmission passenger cars specially designed for upper limb disabled persons. Precautions for the C2 Subject 3 test: Starting the car (first adjust the seat, rearview mirror, check the brakes, gear, and accelerator to ensure they are normal, observe the surrounding environment, and start when safe); Left and right turns and U-turns (do not move the steering wheel within three seconds after turning on the turn signal, and the speed must match the gear); Passing bus stops, pedestrian crossings, and school zones (speed should not exceed 30 km/h, and check left and right for pedestrians); Gear shifting operations (complete the gear shifting operations within the specified time and distance); Lane changing and overtaking (do not move the steering wheel within three seconds after turning on the turn signal, and complete within the specified time and distance); Driving in a straight line (speed should not be lower than 40 km/h, steering wheel fluctuation should not exceed three degrees, and complete within the specified distance); Passing traffic lights (stop and wait at red lights, and always use first gear when starting after stopping); Parking by the roadside (choose a suitable section to park by the roadside within the specified distance). Subject 3 scoring criteria: The following situations will result in immediate failure: Not using the seat belt as required; Blocking or turning off the in-car audio and video monitoring equipment; Not following the examiner's instructions; Vehicle rolling backward more than 30 cm when starting; Using a gear that does not match the speed for a long time, causing the engine speed to be too high or too low; Failing to engage the gear twice in a row while driving; Coasting in neutral while driving; Not following traffic signals, signs, or markings; Not driving at the specified speed; Driving over the solid center line or lane edge line; Driving over the lane dividing line for a long time (more than 15 seconds); Changing two or more lanes continuously; Parking in prohibited areas such as pedestrian crossings or grid lines; Candidate not attending the test at the scheduled time; The following situations will result in a 10-point deduction: Vehicle rolling backward when starting, but less than 30 cm; Engaging the wrong gear when starting or driving; Not using or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking; Turning the steering wheel less than three seconds after turning on the turn signal before starting, turning, changing lanes, overtaking, or parking; Engine stalling once due to improper operation.

Was this review help?
9
1
Share
Clark
08/12/25 1:52pm

Last year, I took the C2 Subject 3 test, which had quite detailed requirements. First, you need to prepare by adjusting the seat, mirrors, and fastening the seatbelt. The lighting test is crucial—you must know how to turn on the low beams, high beams, and turn signals. Then, you start by shifting to D gear, releasing the handbrake, and gradually accelerating. For straight-line driving, you must maintain a steady course without wobbling the steering wheel. When changing lanes, you need to signal, check the rearview mirror for three seconds, and then proceed. The most challenging part is parallel parking—stopping within 30 cm of the curb without crossing the line. You’re also tested on passing intersections, crosswalks, and school zones, where you must slow down, stop, and observe. Overtaking, U-turns, and night driving scenarios often appear too, testing your adaptability. I practiced these points a lot, like parking accuracy, so the test felt easier. These tasks are designed to cultivate safe driving habits—don’t take them lightly. The test isn’t just about skills but also evaluates your composure; stable driving reduces accident risks. Remember, following standard procedures safeguards your life and others’—it’s vital.

Was this review help?
4
4
Share
Expand All
McKira
10/02/25 5:57am

When taking students for the C2 license Subject 3 test, it's essential to master the procedures. Start by adjusting the equipment and checking the lights before getting in the car. The light simulation test includes operations for low beam, high beam, and hazard lights. Begin smoothly, observe the surroundings, and then move. The straight-line driving test evaluates control—maintain an appropriate speed without veering off. When changing lanes, strictly use turn signals and check blind spots. Park accurately by the roadside, keeping within 30 cm of the curb. Slow down or stop at intersections, crosswalks, and bus stops to ensure safety. Nighttime or complex road sections test your ability to switch lights appropriately. These points represent basic driving skills—practice them thoroughly to minimize mistakes. I emphasize details: timely signaling, comprehensive observation, and safety are the core. The test isn’t about skill level but applying rules to develop good habits.

Was this review help?
2
1
Share
Expand All
ColinDella
11/15/25 7:41am

The basic items of the driving test (Subject 3) are consistent, including vehicle inspection, light operation, starting, driving, lane changing, and parking. The lighting section tests your ability to use different light types to adapt to road conditions. Drive straight for a while and maintain stability. When changing lanes, check the mirrors, signal, and don’t rush. Parking by the side requires precise positioning. Slow down at intersections and yield to pedestrians. These items teach you driving rules to avoid accidents. Safety is the most important, training judgment and reaction skills.

Was this review help?
16
3
Share
Expand All
Lyla
01/06/26 2:29am

I'm intensively practicing the Subject 3 items at the driving school to prepare for the exam. The steps of getting into the car—adjusting the seat, mirrors, and fastening the seatbelt—must not be taken lightly. The lighting simulation requires familiarity with all types of light switches to avoid mistakes. For starting operations, press the brake, shift gears, release the handbrake, observe the surroundings, and then proceed slowly. Keep the steering wheel steady during straight-line driving to avoid veering left or right. When changing lanes, signal for three seconds and check the rearview mirror to ensure safety. Parallel parking is the most challenging part—positioning must be precise. Slow down and stop when passing intersections, pedestrian crossings, and school zones. The driving instructor says these are essential skills, and the exam will randomly test them all. Practice details like parking distance repeatedly, stay calm during the exam, maintain a steady mindset, and pass safely.

Was this review help?
14
4
Share
Expand All
More Forum Discussions

Can cracks on the edge of the windshield be repaired by yourself?

It can be repaired, but it depends on the length of the glass crack. If the crack is too long, it cannot be repaired. Here is the relevant information: 1. Windshield repair: Refers to small dents caused by stones or other objects hitting the windshield. Special glass repair agents can be used to fill the dents without affecting the original glass structure and function. Cracks with significant length are not recommended for repair, as the repair effect is quite limited. In such cases, it is better to replace the entire windshield. 2. Advantages: Prevents holes or cracks from expanding, ensuring driving safety. No disassembly required, avoiding poor sealing and vehicle damage caused by glass replacement. Reduces waste glass, aligning with environmental trends. After repair, it is sturdy and durable, restoring the original strength of the glass, improving appearance, with clarity reaching over 95%.
1
0
Share

What does R15 on tires mean?

R is the abbreviation of Radial, indicating that the tire has a radial structure; 15 is the outer diameter size of the rim, meaning it is 15 inches. Generally, the width of tires ranges between 145-285mm, with intervals of 10mm; while the aspect ratio of tires is between 30%-80%. Under normal circumstances, ordinary cars should not use tires with an aspect ratio greater than 75%, and luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio less than 60%. Tires can be mainly classified by structure, tread pattern, type, and climate: 1. Tires classified by internal structure: can be divided into radial tires and bias tires. 2. Tires classified by surface tread pattern: can be divided into rib pattern tires, transverse pattern tires, mixed pattern tires, and off-road pattern tires. 3. Tires classified by vehicle type: can be divided into PC - passenger car tires, LT - light truck tires, TB - truck and bus tires, AG - agricultural vehicle tires, OTR - engineering vehicle tires, ID - industrial vehicle tires, AC - aircraft tires, MC - motorcycle tires. 4. Tires classified by climate: can be divided into winter snow tires, summer tires, and all-season tires.
5
1
Share

Can a car be blown away by strong wind if the handbrake is not engaged?

If the handbrake is not engaged, a car can be blown away by strong wind. Here are additional details: Consequences of not engaging the handbrake: If the handbrake is not engaged, the car may roll backward, which can easily lead to accidents. At this time, the driver's focus is on pressing the accelerator and releasing the clutch, neglecting the foot brake, causing the car to slide backward. The constant honking from vehicles behind adds to the driver's stress, and in a panic, lifting the clutch may cause the car to stall and rapidly roll backward, potentially colliding with the vehicle behind. Emergency measures: Whenever the car is stuck on a slope and starts rolling backward, the driver's first action should be to stay calm and not panic. Quickly press the foot brake to stop the car, then gently engage the handbrake and slowly release the foot brake. It's best to keep the foot on the foot brake until confirming the handbrake is securely engaged before releasing the foot brake completely.
6
0
Share

Can the Air Conditioner Be Turned On After the Engine Is Off?

You cannot turn on the air conditioner after the engine is off. Here is some relevant information about car maintenance: First Maintenance: Some manufacturers determine the first maintenance based on time or mileage. The exact timing for the first maintenance should be referred to the vehicle's user manual or warranty manual. The first maintenance is very important and free, so be sure to remember to do it to avoid missing it and affecting the car's three-year warranty. Maintenance Items: Main car maintenance items include replacing engine oil, oil filters, transmission fluid, spark plugs, air conditioning filters, air filters, brake fluid, etc. However, not all these items need to be replaced every time; it depends on their service life. In addition, maintenance also involves inspections and upkeep of dozens of items across multiple systems, including the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires.
16
3
Share

How Often Should the Clutch Three-piece Set Be Replaced?

Clutch three-piece sets are generally replaced every 100,000 kilometers. Here is some relevant information about the clutch: Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. Principle of Releasing the Clutch: The principle of releasing the clutch is: "slow at first, fast in the middle, and coordinated at the end." When initially pressing down, it should be done quickly and all the way to the bottom. When lifting the pedal, the free travel should be fast, but slow when nearing contact. At the semi-engagement point, pause briefly before fully releasing. The key to this process is finding the semi-engagement point accurately. To control the vehicle speed effectively, treat the semi-engagement point as the boundary: lift quickly above it and press down slowly below it, adjusting to find the speed that suits you best.
7
2
Share

Will the Car's Second Gear Automatically Pop Out When Engaged?

The car's second gear will not automatically pop out when engaged, because once the gear is properly engaged, the transmission will lock that gear in place. Downshift after deceleration: Before upshifting, increase the vehicle speed; before downshifting, release the throttle to reduce the speed first. Before shifting gears, the clutch pedal must be fully depressed, and the gearshift lever should be operated gently, quickly, smoothly, and accurately. Master the timing of gear shifting: Shift gears when the engine speed is around 2000 RPM. First press the accelerator, then depress the clutch, and the clutch will not be forcibly disengaged. Then proceed to shift gears. The downshift sequence is based on the vehicle speed. Depending on the car's condition, generally, when the engine speed drops below around 1500 RPM, a downshift is needed. Make the gear shifting action continuous: Depress the clutch fully in one motion, and engage the gear in one step. Familiarize yourself with the gear positions. If you encounter difficulty engaging a gear, shift to neutral, release the clutch briefly, depress the clutch again, and then you can engage the gear.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.