···
Log in / Register

What are the test contents and marking criteria for Subject 3?

6Answers
VanRuth
07/23/2025, 06:57:51 PM

Subject 3 test contents and marking criteria are: 1. Test contents: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. Marking criteria: coasting in neutral while driving deducts 100 points, taking eyes off the driving direction for more than 2 seconds deducts 100 points, violating traffic safety laws and regulations affecting traffic safety deducts 100 points, not driving according to traffic lights, signs, markings, or police command signals deducts 100 points, not driving at the prescribed speed deducts 100 points, riding or pressing the solid center line or edge line of the lane while driving deducts 100 points, and driving for a long time on the lane dividing line deducts 100 points.

Was this review help?
106
Share
LaNevaeh
08/10/2025, 02:43:25 PM

I remember when I was young and taking my driving test, the third subject was quite challenging. The test content included pre-driving preparations such as walking around the vehicle for inspection, adjusting the seat and seatbelt; followed by the actual driving portion, like starting, driving straight, changing lanes, pulling over, turning, making U-turns, and passing through intersections. Each maneuver required precise execution. The scoring criteria were detailed: failing to signal when starting or forgetting to check the rearview mirror would deduct 10 points, while changing lanes without checking the blind spot by turning your head would result in an immediate 100-point deduction and failure. Stalling the engine once deducted 5 points, and touching the solid roadside line deducted 10 points—accumulating over 100 points meant failing the test. For night tests, there was also a simulation of light usage, with mistakes leading to point deductions. Safety was the core focus, with the examiner monitoring throughout; any slight carelessness could affect the score. The best approach was to practice simulations frequently and maintain a calm mindset.

Was this review help?
10
Share
Expand All
Kathleen
09/23/2025, 03:06:32 AM

I just passed my driving test (Subject 3) recently, and the process was quite nerve-wracking! The test is mainly divided into on-site and off-site driving: first, you need to demonstrate smooth starting and stopping without rolling back; then, when changing lanes, you must use the turn signal, check the mirrors, and look over your shoulder. Additionally, you must slow down and yield at pedestrian crossings—going too fast will result in point deductions. Regarding the scoring criteria, forgetting to fasten the seatbelt deducts 10 points, failing to observe or crossing solid lines during lane changes deducts 10-20 points, and stalling the engine once deducts 5 points. Serious mistakes, such as running a red light or failing to slow down in a school zone, result in an immediate fail. The examiner sits in the passenger seat, recording every small action. My friend failed because they didn’t use the turn signal when turning. I recommend reviewing traffic rules before the test and getting more practical road experience to minimize mistakes.

Was this review help?
17
Share
Expand All
VonCaden
11/06/2025, 09:34:15 PM

The content of the Subject 3 driving test is designed to closely simulate real-world driving scenarios, covering basic operations such as starting, stopping, turning, and lane changing. The test includes simulated emergency braking, which requires quick yet smooth reactions. Regarding the scoring rules, common mistakes include forgetting to turn on the lights at the start (deducting 10 points), parking too far from the side line (deducting 10 points), and failing to slow down as required (deducting 15 points). Accumulating 100 penalty points results in test termination, so even minor errors like forgetting to bring an ID card should be avoided. The core focus remains on safe driving habits, and ample practice is essential to reduce nervousness. The pass rate largely depends on attention to detail.

Was this review help?
14
Share
Expand All
OliviaDella
12/27/2025, 11:21:27 PM

The content of Subject 3 is very practical, testing your ability to handle real road conditions. It includes items such as starting and warming up, driving in a straight line, making sharp turns, and reversing into a parking space. The deduction criteria are clear: stalling once deducts 5 points, changing lanes without signaling deducts 10 points, and serious offenses like failing to yield to pedestrians result in an immediate fail. These are crucial in real driving life—not following them poses safety risks. The exam helps cultivate good habits, such as testing light usage during the night section; mistakes may deduct points but teach you to save energy and fuel. It's recommended to simulate these scenarios during daily driving to improve exam pass rates. The rules are simple and straightforward, with the key being the unity of knowledge and action.

Was this review help?
9
Share
Expand All
ColeLee
03/25/2026, 02:25:41 AM

As a parent, I accompany my child in preparing for the Subject 3 driving test, which involves multiple actions: checking around the vehicle before getting in, starting correctly, slowing down at intersections, etc. Each item is scored in detail, such as 5 points deducted for crossing the line, 10 points for forgetting to turn off the turn signal, and 20 points for speeding or sudden braking. Accumulating 100 penalty points results in disqualification, with safety being the top priority. My child tends to make mistakes in looking back for observation, and forgetting even once can be dangerous. I believe the standards are reasonable, ensuring new drivers don't act carelessly. I often advise them to take their time and do things carefully, as passing in one go is the most worry-free.

Was this review help?
15
Share
Expand All
More Q&A

What is the method for replacing valve stem seals on BMW N13?

Replacing valve stem seals typically requires removing the engine cylinder head, supporting the valves, and then performing operations such as replacing the valve stem seals. Method for removing valve stem seals: Remove the camshaft and hydraulic lifters, storing them face down. Please note that during the operation, the lifters are not interchangeable. Use a spark plug wrench to remove the spark plugs, adjust the piston of the corresponding cylinder to top dead center, and screw the pressure hose into the spark plug thread hole. Install the spring compression tool onto the cylinder head using a bolt. Adjust the relevant valve to the correct position, lightly tap the valve spring retainer, and remove the valve lock. Use a tool to pull out the valve stem seal. Function of valve stem seals: Prevent engine oil from entering the exhaust pipe and intake pipe, leading to oil loss; prevent the mixing of gasoline and air; prevent engine oil from entering the combustion chamber; prevent exhaust gas leakage. Valve stem seals mainly consist of lock pieces, spring retainers, seals, inner and outer springs, valves, valve guides, valve seats, etc. They are generally made of materials with good heat resistance and oil resistance, with fluororubber being the primary material used.
117
Share

How to Quickly Remove Frost from Car Windows?

Methods for quickly removing frost from car windows are as follows: Built-in Defroster in the Car: First, turn on the air conditioning button inside the car and switch the air circulation mode to the external circulation mode. After a short while, the frost will disappear. However, this method has a drawback: turning on the air conditioning button in winter will inevitably increase fuel consumption, and switching to external circulation will cause the temperature inside the car to drop suddenly, making it unsuitable for long drives. Opening the Windows: The fastest and most effective emergency method is to roll down the windows. Letting the wind circulate inside and outside the car for a minute or two will naturally remove the frost. This method saves time and does not increase fuel consumption. Turning on the Heater: Simply turn on the heater inside the car and adjust the airflow direction to blow directly onto the windows. The heater will effectively dry the air inside the car, and once the air is dry, frost will not form on the windows. However, this method also has a drawback: when the car is first started in winter, the coolant temperature has not yet reached the normal level, so the air blown out at this time is not warm.
105
Share

Can I directly pull down from 1st gear to 2nd gear in Subject 3 driving test?

It is not advisable to directly pull down from 1st gear to 2nd gear in the Subject 3 driving test. Many operations must follow the correct steps, otherwise the system may fail to detect the action, leading to point deductions. Therefore, it is more appropriate to first shift to neutral before pulling down to 2nd gear when changing from 1st to 2nd gear in Subject 3. Even if directly pulling down from 1st to 2nd gear is allowed in Subject 3, it is still not recommended. This method carries the risk of failing to engage the gear or engaging the wrong gear. Following the proper steps—fully depressing the clutch, shifting to neutral, and then shifting to 2nd gear—ensures higher accuracy and safety. During gear shifting operations in Subject 3, after shifting to neutral, pause for 0.5-1 second before shifting to another gear. There is no specific requirement for the duration of staying in each gear during gear shifting. Upon hearing the gear shift command, complete the shift within 5 seconds. The reason for pausing 0.5-1 second is mainly to prevent the system from failing to detect the shift due to excessive speed, which could result in point deductions for not following the correct procedure.
106
Share

What is the fuel tank capacity of the 2013 Peugeot 508 in liters?

2013 Peugeot 508 has a fuel tank capacity of 70 liters, and it requires 92-octane or higher unleaded gasoline. It is a mid-size car under Dongfeng Peugeot. Among similar models, the Volkswagen Magotan has a fuel tank capacity of 66 liters, and the Buick Regal has a fuel tank capacity of 60 liters. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, ensure that the ventilation holes are clear. The filter screen at the fuel filler inlet should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out during driving.
108
Share

At What Age Can You Obtain a Driver's License?

You can obtain a driver's license if you are between 18 and 70 years old. However, since there are various types of driver's licenses, the age requirements may differ accordingly. A driver's license is a legal document issued by the relevant authorities to individuals who have legally learned to drive motor vehicles, mastered traffic regulations and driving skills, and passed the required examinations, permitting them to operate specific types of motor vehicles. According to Article 11 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' (Ministry of Public Security Order No. 71), the age requirements for applying for a motor vehicle driver's license are as follows: For small cars, small automatic transmission cars, and light motorcycles, applicants must be between 18 and 70 years old. For low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, applicants must be between 18 and 60 years old. For urban buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, applicants must be between 21 and 50 years old. For tractor-trailers, applicants must be between 24 and 50 years old. For large passenger vehicles, applicants must be between 26 and 50 years old.
107
Share

Is it necessary to continue practicing driving after failing the subject two test?

It is necessary to continue practicing driving after failing the subject two test. The main reasons for failing are mostly due to unfamiliarity with the driving test items or insufficient proficiency in vehicle operation. Therefore, during the test, any unexpected situation can lead to failure. Many candidates feel nervous during the test, some even to the point of shaking hands and feet. However, overall, most candidates lack confidence in their operation skills. If each driving test item is practiced to a very proficient level, there would be no lack of confidence in operation. Failing the subject two test is often due to unfamiliarity with the test items or insufficient operational proficiency, so practicing after failing is essential. Notes for the subject two test: Dress comfortably and prepare mentally before the test; pay attention to key points when reversing into the garage, avoiding turning left or right; when parking sideways, ensure the rear wheels exceed the edge line of the garage, adjust the distance properly, remember to turn on the signal light and honk. When making a sharp turn, quickly turn the steering wheel after identifying the correct position point; when driving on a curve, make wide turns after entering the curve, maintain a steady speed, and avoid crossing any lines. After the test, drive the car back to the starting position, confirm by signing, and then turn off the engine.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.