What are the Ten Don'ts for Safe Driving?

2 Answers
MacBrandon
07/24/25 4:09am
Driver's "Ten Don'ts" for Safe Driving: Consciously abide by traffic regulations, do not drive illegally; Regularly maintain the vehicle, do not drive a faulty car; Pay attention to the balance between work and rest, do not drive while fatigued; Ensure safe loading, do not drive an overloaded vehicle; Drive in the designated lane, do not drive impatiently—better to stop for three minutes than to rush for one second; Practice civilized yielding, do not drive aggressively; Adhere to the speed limit, do not drive like a hero; Master driving patterns, stay focused, do not drive blindly; Be cautious on highways, do not drive with luck, stay fully alert; Prioritize prevention, do not take risks, safety first. Safe Driving Precautions: Do not press the accelerator pedal forcefully before the engine coolant low-temperature warning light goes off. Insufficient warm-up may cause abnormal combustion of unburned gas and damage the three-way catalytic converter. Before driving, always ensure all doors are closed. Otherwise, doors may suddenly open during driving, leading to serious accidents. If any door is not properly closed, a door ajar warning will appear on the dashboard. When snow or fallen leaves accumulate at the air intake under the lower edge of the windshield, remove them promptly. Otherwise, fresh air cannot be drawn in, resulting in insufficient ventilation inside the car. During rain, rising interior temperature may cause fog to form on the windows, impairing the driver's visibility.
Was this review help?
15
4
Share
LeStephanie
08/10/25 11:40pm
I've been driving for 20 years without any major accidents, all thanks to strictly following the Ten No-No Rules for safe driving. These rules are like golden principles when driving: no drunk driving - even a drop of alcohol can slow reactions and lead to tragedy; no fatigued driving - especially on long trips when drowsiness sets in, I stop every two hours; no speeding - losing control becomes easier at high speeds, particularly dangerous in rain; no driving without seatbelts - I buckle up immediately upon entering; no phone use - a second of distraction could cause a rear-end collision; no lane changes without signaling - letting trailing vehicles know my intentions; no running red lights - traffic signals are discipline; no tailgating - maintaining distance prevents collisions; no sudden braking in bad weather - slowing down is key in fog; no reversing or wrong-way driving on highways - driving against traffic is practically suicidal. These rules protect not just myself but also pedestrians. I remember one close call with a red light that became a lifelong wake-up call - safety first. Regular review of these rules gives me more confidence behind the wheel.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the normal RPM range for the Changan CS35?

Changan CS35's normal RPM range is above 2000-3500. Low gear with high RPM makes the engine work with less effort but consumes more fuel, which is better for climbing slopes; high gear with low RPM makes the engine struggle, and prolonged use can damage the engine, but it is more fuel-efficient. Below is the model introduction: 1. The Changan CS35 is a compact 5-door, 5-seat SUV with body dimensions of 4170mm in length, 1810mm in width, and 1670mm in height, and a wheelbase of 2560mm. 2. The Changan CS35 is equipped with a 1.6L engine and a 4-speed automatic transmission, with a maximum power of 92 kW and a maximum torque of 160 Nm. It features front-wheel drive, with a MacPherson independent front suspension and a torsion beam rear suspension.
1
1
Share

How to Use Toyota's Foot Brake

Here are the specific steps for using Toyota's foot brake: 1. After the vehicle comes to a complete stop, shift the transmission to the neutral (N) position. 2. Press the parking foot brake (this will engage the parking brake) and turn off the engine. 3. After pressing the automatic transmission foot brake, shift the transmission from the N position to the parking (P) position. Below is an introduction to parking brakes: 1. There are three types of parking brakes: electronic parking brake, foot parking brake, and mechanical handbrake. 2. Among them, the foot parking brake and mechanical handbrake both use mechanical mechanisms to achieve parking braking, while the electronic parking brake uses an electric motor-driven traction device to pull steel cables and lock the wheels. 3. Compared to electronic parking brakes, traditional mechanical handbrakes offer higher stability and reliability, and have a much lower failure rate than electronic parking brakes.
12
0
Share

What are the reasons for the lack of heating in Wuling Zhiguang?

There are two main reasons for the lack of heating in Wuling Zhiguang: 1. Engine cooling system issues. Check the temperature of the two inlet pipes of the heater core. If both pipes are hot, it indicates a problem with the air flow control mechanism. Conversely, if both pipes are cold, or if one is hot and the other is cold, it suggests an issue with the cooling system. 2. Malfunction of the heating control mechanism. The car's heating system uses a blower to direct heat from the heater core into the cabin. If the air flow is insufficient or the distribution of hot and cold air is poor, preventing the heat from the heater core from being effectively dispersed, the heating temperature will not rise. In this case, first check if the air filter is dirty or clogged, and clean or replace it if necessary. Then inspect the operation of the blower at each speed setting to ensure that each setting achieves sufficient rotation speed.
3
2
Share

What is the tire size of the Levin?

Levin's tire brand is Bridgestone. The tire size specifications of the Levin are 225/45R-17 and 205/55R-16, which vary depending on the model configuration. Below is more information about the Levin: 1. Exterior: The Levin is built on the GA-C platform under the TNGA architecture, with an overall design style that is more youthful and dynamic. The appearance of the new-generation Levin has undergone significant changes, with increased lines on the front face compared to the old model, raised front fenders on both sides, and headlights that have been changed to a hook style, complemented by a black grille, giving it a touch of fashion. At the rear, a black horizontal chrome strip runs through the taillights on both sides, with black lower trim wrapping around the rear. 2. Interior Space: The dashboard design is more streamlined and layered, with optimized button layouts and added commonly used storage spaces. 3. Interior: Through well-balanced lines, it creates a luxurious interior space that combines a sense of sophistication and refinement. The cabin extensively increases the use of soft plastic materials, featuring a Starry Gray interior that brings a sense of advancement and freshness with its bright blue-gray hue. The seats utilize the latest TNGA architecture, offering excellent wrap and support.
14
3
Share

How to turn on the heating in an Audi Q5L?

First, start the vehicle and allow the engine to warm up until the coolant temperature reaches above 60°C. Then, turn off the AC button, adjust the air volume and direction to a comfortable position, and set the temperature control to the red zone where you feel comfortable. Warm air will then come out of the vents. Below is an introduction to the heating system: 1. After turning on the heating, set the air circulation mode to internal circulation to help the interior warm up quickly. Later, switch to external circulation as needed to promote air circulation inside the car. When the engine is running, incomplete fuel combustion produces high concentrations of carbon monoxide. If the car is stationary with the heating on and the windows closed, the carbon monoxide emitted by the engine can accumulate and increase in concentration. Therefore, avoid running the heating while parked. 2. Do not turn on the heating immediately upon entering the car, especially in winter. Starting the car in winter can be difficult, and it is necessary to warm up the engine first before driving. The water tank temperature is still low when you first enter the car, so wait until the water tank temperature rises before turning on the heating. Otherwise, it may cause engine wear and other issues.
12
3
Share

How to Remove Automotive Glass Adhesive?

Automotive glass adhesive can be removed using the following methods: 1. Prepare a soft cloth, then pour alcohol or acetone onto the cloth and wipe the area with glass adhesive. Repeat the process several times until it is completely clean; 2. Use a heat gun to warm the glass adhesive, which reduces its stickiness, then wipe it off firmly with a soft cloth. Avoid using a blade to prevent scratching the car glass; 3. Use banana oil for removal. Glass adhesive does not dissolve in water but is easily soluble in many solvents. Banana oil contains butyl acetate, which can quickly dissolve glass adhesive; 4. Use nail polish remover. Nail polish has properties similar to glass adhesive, both being highly viscous substances that are difficult to clean once cured. Nail polish remover can effectively clean and remove stubborn stains.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.