What are the techniques for the fixed-point parking and starting on a slope in Subject 2?
1 Answers
The techniques for the fixed-point parking and starting on a slope in Subject 2 are as follows: 1. Drive the vehicle to the test area for fixed-point parking and starting on a slope. (In-car voice prompt: Next test item is uphill starting, please begin—entering uphill starting.) 2. After hearing the voice command, turn on the right turn signal, observe the left, center, and right rearview mirrors, control the speed with semi-engaged clutch, and slightly steer towards the right side of the field. 3. Observe the point at the right 1/3 of the engine hood; when it aligns with the roadside line, the distance between the car body and the roadside is about 30 cm. 4. Continue to control the speed with semi-engaged clutch, slowly approach the parking point. When the lower edge of the left rearview mirror aligns with the second thick yellow line, first press the foot brake, then press the clutch to stop the car steadily, and turn off the right turn signal. Another method to determine the parking position is to look at the raised point on the right wiper, the pole of the parking sign, and your eyes forming a straight line; then you can press the clutch and brake to stop. After stopping the car steadily, wait for the voice prompt. (In-car voice prompt: Fixed-point accurate.) 5. Within 30 seconds after hearing the voice prompt, you need to complete the slope starting. When starting on the slope, slowly lift the clutch (do not lift too quickly) and turn on the left turn signal. When the front of the car tilts up and the car body feels like shaking, keep the left foot on the clutch without moving, release the brake with the right foot, and the car will start smoothly towards the slope. Turn off the left turn signal, finally fully ascend the slope, smoothly descend, and exit the fixed-point parking and starting test area on the slope.
