What are the techniques for starting on a slope in an underground garage?

1 Answers
SanLaura
07/29/25 12:18pm
Techniques for starting on a slope in an underground garage: 1. For automatic transmission models, it's very simple. There's no need to press the clutch or shift gears. Just pull up the handbrake, and when starting, press the accelerator and release the handbrake. 2. For manual transmission cars, slowly release the clutch. When it's about halfway released, you'll feel the car body shake noticeably, and the car is about to stall. At this point, release the handbrake and the foot brake (it's recommended to add a bit of throttle), and the car will slowly climb up. When there are many cars queuing to exit the underground garage, pay attention to maintaining a distance from the car in front to prevent collisions if the car in front rolls back after starting. Also, keep a distance from the car behind to leave enough buffer space for your own start.
Was this review help?
4
2
Share
More Forum Discussions

Why are used Audi A7s relatively cheaper?

Audi A7 used cars are cheaper because the vehicle has wear and tear in all aspects, and its performance is not as good as a new car, hence the lower price. Below are some related introductions about the Audi A7: 1. Exterior: The overall design of the Audi A7 is dynamic, with a front face that looks aggressive. The headlights on both sides are quite sharp, and the matrix LED headlights appear very spirited when lit. The dimensions are 4976×1908×1405mm, with a wheelbase of 2928mm. 2. Powertrain: The Audi A7 is equipped with a 2.0 engine, delivering a maximum output power of 180kW and a maximum torque of 370Nm. The official 0-100km/h acceleration time is 7.0 seconds.
10
4
Share

How to Remove Adhesive Residue from Glass After Film Removal?

To remove adhesive residue from glass after film removal, you can apply a few drops of essential balm onto the adhesive and wipe it off with a towel. Below is relevant information about automotive window film: 1. Overview: Automotive window film (Auto-tint-film) refers to a thin layer applied to the front and rear windshields, side windows, and sunroof of a vehicle. This film is also known as solar film or heat-insulating film. 2. Functions: It primarily blocks ultraviolet rays, reduces heat transmission, prevents injuries caused by shattered glass, and minimizes glare. Additionally, due to its one-way visibility feature, it helps protect personal privacy. Furthermore, it reduces damage to interior items and passengers from UV exposure, lowers cabin temperature through physical reflection, decreases air conditioning usage, thereby improving fuel efficiency and saving costs.
17
2
Share

Can Ora Cars Drive on Highways?

Ora cars can drive on highways. Introduction to Ora: Ora is a brand under Great Wall Motors. The models under the Ora brand include Ora R1, Ora White Cat, Ora Black Cat, Ora Good Cat, and others. Taking the Ora White Cat as an example: 1. Body: The Ora White Cat is a micro pure electric vehicle with a wheelbase of 2490 mm, and its length, width, and height are 3625 mm, 1660 mm, and 1530 mm respectively. 2. Suspension: The Ora White Cat uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. The use of a torsion beam at the rear can expand the rear seating space and trunk space, and it also helps to reduce costs.
13
5
Share

Can You Turn Right Without Looking at the Red Light?

When making a right turn at an intersection with a right-turn arrow signal light, vehicles are not allowed to turn right if the signal light is red; if there is no right-turn arrow signal light at the intersection, vehicles in the right-turn lane can turn right even if the signal light is red, but they must not hinder the passage of vehicles and pedestrians that have been given the right of way. Below are specific details about right turns: Specific situations where you need to wait for a red light when turning right: At intersections with circular signal lights or without any auxiliary signs, you do not need to wait for a red light to turn right; if the signal light is an arrow type, you need to wait for a red light to turn right. When making a right turn, vehicles must drive in the right-turn lane. If you turn right from a straight lane or a left-turn lane, it will increase traffic congestion and may result in penalties from law enforcement for running a red light. Things to pay attention to when making a right turn: Check the traffic signal light. If it is a circular or spherical light, right turns are generally not restricted, but there may be exceptions where a sign near the light states "No Right Turn on Red," which requires special attention; check roadside signs. Sometimes, even if the signal light is a circular type, specific locations may have signs prohibiting right turns or limiting right turns to certain times, which requires special attention; observe the ground guide lines. On some roads, the rightmost guide line may not have a right-turn arrow, which also requires special attention.
16
0
Share

How to Repair a Faulty Igniter?

Igniter damage does not require repair; it should be replaced directly. An igniter refers to a device capable of providing sufficient energy in an instant to ignite pulverized coal, oil (gas) fuel, and stabilize the flame. The car igniter is a system used to start the vehicle's engine. The causes of igniter failure are as follows: 1. Poor contact: When using the igniter, the car may experience sudden stalling without obvious patterns. Replacing the platinum contacts can eliminate the issue. This is usually due to loose connections or damaged wiring grounding in the igniter circuit. 2. Replacing the igniter: After prolonged driving, the car may exhibit unstable operation or stalling, which returns to normal after cooling down. This phenomenon does not occur with platinum contacts, indicating that the igniter chip may have high-speed misfiring issues, necessitating the replacement of the igniter.
7
5
Share

What to Do When the Car Stalls on a Steep Slope?

Solutions for stalling on a steep slope are introduced as follows: 1. Slowly release the clutch and brake: When starting on a slope, first ensure the clutch and brake are fully depressed. Slowly release the clutch until the car body shakes significantly. Keep the clutch pedal steady with your left foot and slowly release the brake with your right foot. Once the car starts moving, fully release the brake and gently press the accelerator to complete the slope start. 2. Use the handbrake: You can also use the handbrake to start. When parking on a slope, pull up the handbrake. During the start, control the handbrake with your right hand and the clutch with your left foot. When the clutch reaches the semi-engaged state, keep the clutch steady, slightly press the accelerator, and release the handbrake to complete the slope start. The key to this method is mastering the semi-engaged state. 3. Use inertia: If the road before the slope is flat and traffic permits, you can increase the speed to use the car's inertia to complete the slope climb.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.