What Are the Techniques for Right-Angle Turns on Narrow Roads?

[LeCourtney]

Techniques for right-angle turns on narrow roads are as follows: When preparing to make a right turn ahead, it's best to position the vehicle about 20 centimeters closer to the left side in advance to avoid obstacles on the right side of the car. When the rearview mirror aligns with the right corner, turn the steering wheel fully to the right. If the road width ahead allows, you can delay turning the wheel fully to the right, enabling the turn to be completed in one smooth motion. If the road ahead is not wide enough, you may need to make multiple adjustments to the steering wheel, positioning the vehicle as close as possible to the side farther from the corner to gain a larger turning angle. While continuing the turn, use the right rearview mirror to monitor the distance between the right side of the vehicle and the corner, paying attention to obstacles ahead as the front of the car arcs to the right. Maintain a slow speed and yield to pedestrians while driving. Ensure that neither the front of the car nor the right side will come into contact with pedestrians or obstacles before proceeding with the turn. Avoid forcing the turn. Timing for steering wheel movements during right-angle turns on narrow roads: Before turning, try to drive as close to the outer side as possible. When the front of the car is about 50-70 centimeters from the opposite edge, start turning inward. Keep an eye on the front while also checking the rearview mirror. When you feel the middle of the car is about to pass the vertex of the right angle, gradually straighten the wheel. When entering the right angle, position the right (left) side of the front of the car at the one-third point opposite the turning direction. At this point, the right (left) wheels should be about 30 centimeters from the edge. During the turn, when the small triangular window pillar of the right (left) front door aligns with the protruding point of the right angle, quickly turn the steering wheel fully to the left. As you exit the corner, swiftly straighten the wheel once aligned with the exit and continue driving forward until completely out of the right angle.

[DiDaisy]

My experience with making 90-degree turns on narrow roads is that controlling speed is more important than anything else—lightly press the accelerator to slow down to the minimum. Observing the surroundings is particularly crucial; check the mirrors thoroughly before turning, especially the right-side blind spot, to ensure there are no pedestrians or obstacles. Steering wheel control should be decisive—set the angle in one go without hesitation or partial turns followed by corrections. Align the car body properly, and if space is insufficient, don’t hesitate to reverse and adjust. Remember to use gentle braking to avoid skidding from sudden stops. These techniques come from long-term practice driving in tight urban alleys, ensuring a high success rate for safe navigation.

[LeFrank]

When I first started driving, I was extremely nervous about making sharp right-angle turns on narrow roads, always afraid of scraping against walls or other cars. Gradually, I realized the key is to slow down, observe the rear and side conditions in advance, and turn the steering wheel decisively without stopping halfway. Using rearview mirrors for positioning and making minor adjustments to the car body are very practical. With more practice, it becomes natural—patience is key, and don't let stress affect your operation. Safety should always be the top priority to avoid accidents.

[Katelyn]

When teaching someone to drive, the key to making a sharp turn on a narrow road is slow speed, accurate observation, and decisive steering. Control the speed in a low gear and observe surrounding obstacles and blind spots. When turning, steer the wheel fully at once, and use reverse gear for minor adjustments. The practice method is simple: practice more in open areas and gradually adapt. Safety comes first; ensure there are no risks before proceeding.