···
Log in / Register

What are the techniques for reverse parking in an underground garage?

4 Answers
ClaraDella
07/29/25 8:41pm
First, determine if the parking space is 'qualified'. When the front wheels pass the parking space, start turning the steering wheel to make the car move in the direction away from the parking space. Utilize the available width of the passage to tilt the car's position as much as possible. This allows the driver to observe the rear danger points of the vehicle through the rearview mirror. When a 'gap' between your car and the vehicles on both sides is visible in the right rearview mirror, you can adjust the steering wheel to modify the car's reversing trajectory and try to straighten it for parking.
Was this review help?
8
4
Share
Roland
08/14/25 6:00pm
When I first started driving, I was always worried about scraping against pillars while reversing in underground garages, but now I handle it with ease because I go in and out of city garages several times a week. The trick lies in the preparation: first adjust the seat and mirrors to ensure clear visibility, and move slowly—don’t rush and accelerate. During the maneuver, keep a close eye on the mirrors to judge the distance from the pillars, turn the steering wheel gently without sudden movements, and once the car is straight, correct the direction and ease in slowly. In dimly lit areas, I always turn on the headlights and fog lights to see the surroundings clearly; if unsure about the position, I get out and walk around to check before continuing. Practicing a few times in a spacious garage on weekends helps build confidence. Safety comes first—always scan front and back while reversing to watch for pedestrians. Once it becomes a habit, parking in garages becomes natural and quick.
Was this review help?
1
2
Share
Expand All
DiIsabel
10/16/25 6:01am
Safety is the top priority, and I emphasize extreme caution and slow movement when reversing in underground parking lots. The first step is assessing the environment: turn on headlights when lighting is dim, and reduce the turning radius in tight spaces. Operate at an extremely slow speed, using rearview mirrors to monitor pillars or walls to prevent scratches; steering adjustments should be gradual—avoid sudden turns. As a frequent driver, I always check blind spots, and some suggest opening windows to listen for sounds as an additional aid. Regarding related aspects, if the vehicle has a reversing radar or camera, I use it to measure distance, but never rely solely on one point—multi-angle observation is more reliable. Beginners can practice basics in empty spaces to stay calm under pressure, ensuring both efficiency and accident prevention overall.
Was this review help?
9
1
Share
Expand All
DeclanMarie
11/29/25 6:49am
As a novice at reversing, I used to panic and make mistakes when parking in underground garages, but I improved quickly after learning key techniques. Slow operation is fundamental—control the throttle and avoid sudden acceleration. Watch the pillars' positions in the rearview mirror and steer the wheel gradually to adjust the angle. Since garage lighting is dim, I turn on the headlights to enhance visibility. I practiced repeatedly during off-peak hours to get familiar with steering feedback. When mistakes happen, don’t get discouraged—stop and readjust. Now, I’m no longer afraid, and my parking efficiency has significantly improved.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Can You Pass the Driving Test by Crossing the Dotted Line in Subject 3?

Crossing the dotted line in Subject 3 is permissible. According to China's Road Traffic Safety Law, the solid center line on the road must not be crossed or driven over, while the dotted line can be temporarily crossed. Therefore, if a vehicle runs over a solid line during the road test, it will be directly judged as a failure. The contents of the Subject 3 road driving skills test include: For large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission cars for the disabled, the test includes preparation before getting on the car, simulated nighttime lighting test, starting, driving in a straight line, and shifting gears. Changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night; the test contents for other types of vehicles are determined by the provincial traffic management departments of the public security authorities.
14
1
Share

How to Deal with the Failure of the Mechatronic Unit in the Magotan Transmission?

If the mechatronic unit in the Magotan transmission fails, the solution is to replace it and then upgrade the control software using a computer. Below are the specific details about the transmission mechatronic unit: 1. Working Principle: The transmission mechatronic unit controls the operation of the automatic transmission through solenoid valves. It processes input circuits, connecting signals from sensors and other devices. These signals are processed, impurities are filtered out, and then amplified. They are then converted into electrical signals to drive the solenoid valves. 2. Functions: Using the mechatronic unit for control allows precise management of the solenoid valves, enabling the transmission to operate more efficiently and accurately. This results in smoother vehicle driving and improved fuel efficiency. The mechatronic unit can connect to the system, fully enabling electronic gear shifting. After removing the transmission oil pan, the mechatronic unit becomes visible. Below the unit, there is an aluminum valve body with cylindrical plungers inside. The valve body is equipped with multiple solenoid valves that perform various detection functions.
17
0
Share

Where is the engine of the Hanteng X5 produced?

Hanteng X5 uses a self-produced engine. The following is an introduction to the Hanteng X5 engine and related information about the Hanteng X5: Introduction to the Hanteng X5 engine: This car is equipped with a 1.5-liter turbocharged engine across all models, paired with either a 5-speed manual transmission or a 6-speed automatic manual transmission. Related information about the Hanteng X5: The Hanteng X5 is a model under the Hanteng brand. The car has a length of 4501 mm, a width of 1820 mm, and a height of 1648 mm, with a wheelbase of 2600 mm. In terms of interior design, the car features a warm dual-tone interior with wood grain trim, a 9-inch central control screen, and the Hanteng Cloud Intelligent Internet Service System, which provides remote diagnostics, remote control, navigation, and other functions. In terms of configuration, the car is equipped with one-button start-stop, EPB electronic parking brake, automatic parking, panoramic sunroof, and more.
19
1
Share

What is BBL car?

BBL stands for "Benz, BMW, Lexus". In recent years, the automotive market has witnessed a surge in popularity for Lexus, with increasing acclaim. Both its growth trajectory and sales figures indicate strong potential to overtake Cadillac as the leader among second-tier luxury brands, and even show signs of entering the first-tier luxury segment. Its high rankings in J.D. Power reliability studies, stellar reputation, and sustained momentum rival that of BBA. More details are as follows: Origin: Many netizens speculate that the BBA landscape may be reshaped, with Lexus potentially replacing Audi in the future to form the first-tier luxury brand trio alongside Mercedes-Benz and BMW, collectively referred to as "BBL". International context: This notion isn't unrealistic, as it has already materialized in the U.S. Based on the top 10 luxury brand sales rankings in the U.S. for 2019, Lexus' sales figures are comparable to those of Mercedes-Benz and BMW, placing them firmly in the first tier, while Audi shows a significant sales gap, relegating it to the second-tier. The BBL grouping closely reflects this reality.
19
2
Share

What are the standards for exceeding height and length in pickup trucks?

The "Implementation Regulations of the Road Traffic Safety Law" Article 54 stipulates: Small vehicles must not exceed the approved load capacity specified on the driving license, and the length and width of the load must not exceed the vehicle compartment; the height from the ground must not exceed 2.5 meters. The cargo must not extend beyond the rear of the vehicle compartment, otherwise it is considered overlength. Below is additional information: 1. Introduction: Pickup trucks are an important part of the automotive market. A pickup (pick-up) is a vehicle model that combines a car's front end and cab with an open cargo compartment. Its characteristics include the comfort of a sedan, strong power, and better cargo capacity and adaptability to rough roads compared to sedans. 2. Features of Pickup Trucks: The functional advantages of pickup trucks lie in their dual characteristics of both family and commercial use (passenger and cargo), with notable features as a utility vehicle for both units and families; diverse structures meet a wider range of needs (two-door or four-door, long or short cargo compartments, two-wheel or four-wheel drive, gasoline or diesel engines). Compared to sedans, they have advantages in load-bearing and off-road capability, while compared to light and mini trucks, they offer better safety and driving comfort.
14
2
Share

Can Sedans Travel on National Highway 318?

Sedans can travel on National Highway 318. The specific details are as follows: 1. Chassis Issue: The overall road conditions of National Highway 318 on the Sichuan-Tibet route are not ideal. Firstly, the roads are steep with numerous high peaks; there are 15 peaks to cross along the way, including continuous curves like those at Zheduo Mountain. Secondly, the road conditions are poor, often encountering flash floods, mudslides, landslides, and falling rocks. Although National Highway 318 on the Sichuan-Tibet route has undergone large-scale road repairs in recent years, many sections are still affected by natural disasters, making it impossible for vehicles with low ground clearance to pass. 2. Tire Issue: Some sections of National Highway 318 on the Sichuan-Tibet route are gravel roads, which are very demanding on tires. Sedan tires are designed for asphalt roads and are relatively thin, unable to withstand the significant damage caused by gravel roads. Additionally, there are few tire repair points along National Highway 318. 3. Vehicle Popularity Issue: The most commonly seen vehicles in Tibet are the Toyota Prado, Mitsubishi Pajero, and Toyota Land Cruiser. Gas stations and repair shops along the route mainly supply fuel and parts for these models.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.