What are the techniques for removing asphalt black spots on white cars?

1 Answers
OArabella
07/30/25 10:18am
First, use a cleaning agent to thoroughly wash the entire car. Spray tar remover on the asphalt black spots on the car body (tar remover can effectively decompose asphalt). After letting it sit for 3 minutes, wait for the cleaning agent to soften and decompose completely, then wipe it clean with a towel.
Was this review help?
7
0
Share
More Forum Discussions

Can the Honda Life be driven on highways?

"The Honda Life can be driven on highways, but the speed should not be too high, around 100 km/h is recommended, otherwise the vehicle may feel unstable. Precautions for driving on highways: Fasten seat belts: Both the driver and front passenger must fasten their seat belts and ensure they remain fastened throughout the entire journey on the highway. Do not unfasten them midway, and never take the risk of not wearing them, as the consequences in case of an accident could be severe. Observe speed limits: Accelerate to at least 50 km/h quickly, moving from the ramp to the acceleration lane before entering the main lane, while taking care not to obstruct other vehicles already in the main lane. During normal driving, do not exceed the maximum or minimum speed limits on the highway to avoid accidents. Maintain a safe distance: Adjust the following distance based on your speed, referring to the distance markers on the roadside. While keeping a safe distance from the vehicle in front, also pay attention to the vehicle behind. In case of emergency braking, always check the distance of the vehicle behind to prevent rear-end collisions. Avoid unnecessary lane changes: Do not change lanes unnecessarily. If you need to overtake, signal in advance and only overtake vehicles in the adjacent lane. Do not overtake multiple vehicles consecutively. After overtaking, return to your original lane promptly and avoid driving on lane markings."
2
4
Share

How Many Points Are Deducted for Illegal Use of Another Vehicle's License Plate?

Drivers who illegally use another vehicle's license plate will have 12 points deducted and be fined between 2,000 and 5,000 yuan according to the law. Below is an introduction to the penalty standards for counterfeit license plates: 1. According to the "Road Traffic Safety Law of the People's Republic of China": The use of another vehicle's motor vehicle registration certificate, license plate, driving license, inspection qualification mark, or insurance mark will result in confiscation by the traffic management department of the public security organ, detention of the motor vehicle, and a fine ranging from 2,000 to 5,000 yuan. 2. According to the "Scoring Standards for Road Traffic Safety Violations": Motor vehicle drivers who use forged or altered motor vehicle license plates, driving licenses, or use another vehicle's license plate or driving license will have 12 points deducted at once. 3. The use of a forged motor vehicle registration certificate, license plate, driving license, or inspection qualification mark may result in detention for up to 15 days under the "Public Security Administration Punishment Law". Whether intentionally obscuring a license plate or using another vehicle's license plate, both are serious traffic violations with severe legal consequences. Drivers should abide by the law.
10
0
Share

What is the speed for shifting from 3rd gear to 2nd gear?

The optimal speed for shifting from 3rd gear to 2nd gear is when the speed drops to 25 km/h, as 3rd gear corresponds to a driving speed between 20 to 40 km/h. This gear is commonly used in urban driving, while 2nd gear corresponds to a speed range of 5-20 km/h. Generally, the ideal shift timing for most cars is when the engine speed reaches 2000 rpm, preferably not exceeding 2500 rpm. For high-displacement, high-power engines, the maximum efficiency range is often delayed, so shifting around 3000 rpm may be considered. Different vehicles exhibit varying performance in terms of engine and transmission, and drivers can identify the right shift timing by listening to the engine sound. A dull engine sound usually indicates it's time to upshift. Driving in a gear that's too high increases engine pressure and fuel consumption, significantly affecting both the engine and transmission. Conversely, if the engine speed falls below around 1500 rpm, it's time to downshift. Upshift timing: When the engine has ample power, it emits a dull humming sound. After upshifting, if there's no power shortage or drivetrain vibration, and the vehicle accelerates smoothly and naturally, it indicates accurate upshift timing. Downshift timing: When the vehicle's speed and engine speed continuously decrease, and you feel the car losing power with the engine compartment starting to vibrate, it's time to downshift one gear. Downshifting too early can cause noticeable jerking, wasting engine power and increasing fuel consumption, while also negatively impacting the engine and transmission lifespan. Downshifting too late may result in insufficient power even after the shift, leading to continued jerking. Misjudging the shift timing can cause such irreversible consequences, affecting the driving experience. Manual gear shifting: Generally, to engage 1st gear, push the lever to the left and then forward; for 2nd gear, push left and then downward; for 3rd gear, return to neutral and push straight upward; for 4th gear, return to neutral and push straight downward; for 5th gear, push straight to the right and then upward (refer to your vehicle's gear markings for specifics). Manual transmission shifting tips: While shifting, coordinate the clutch and throttle properly. Press the clutch pedal fully, then release the throttle pedal, and quickly shift to the desired gear. Release your hand immediately after shifting; avoid keeping it on the gear lever (commonly known as the gear stick) for too long, as this can damage it. For manual transmission vehicles, always remember the principle of "accelerate before upshifting, decelerate before downshifting." Before upshifting, press the throttle to increase speed, and before downshifting, release the throttle to reduce speed. Always press the clutch pedal fully before shifting, and operate the gear lever gently, quickly, smoothly, and accurately.
3
1
Share

How to Determine When to Replace Power Steering Fluid

Methods to determine if power steering fluid needs replacement: 1. Feel the steering wheel response - if steering feels noticeably heavier, it's likely due to deteriorated power steering fluid reducing assist effectiveness; 2. Check the fluid color - normal fluid appears reddish, but if you observe significant darkening, immediate replacement is required. To prevent fluid deterioration, replacement is generally recommended every 2 years or 30,000 kilometers. Power steering fluid is a special hydraulic liquid used in the power steering pump system, which facilitates smoother steering operation through hydraulic pressure.
5
1
Share

Why was the Geely Emgrand GS discontinued?

Emgrand GS automatic transmission has not been discontinued. The official announcement only states that orders are temporarily suspended due to high demand exceeding production capacity, meaning supply cannot meet demand. However, after 2017, with the completion of new factories, the issue of insufficient production capacity no longer exists. Rapid brand development often faces production capacity shortages. Currently, Geely has a large number of orders, but popular models may face longer waiting times. Delays in vehicle delivery could lead to customer dissatisfaction, and ensuring high-quality after-sales service is another challenge Geely needs to address.
8
5
Share

How to reset the maintenance light on Dongfeng Honda Inspire?

Dongfeng Honda Inspire maintenance light reset steps: Turn the ignition switch to the ON position, release the short-distance counter button, when the SERVICE sign appears on the display, pull out the minute button on the clock, turn the minute button to the right, the mileage will appear on the display, turn off the engine, reset the reminder message, turn the ignition switch to the ON position, wait until the SERVICE sign disappears. Dongfeng Honda Inspire is the flagship sedan of Dongfeng Honda, with a body size of 4910mm in length, 1862mm in width, 1450mm in height, and a wheelbase of 2830mm.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.