What are the techniques for parking 30cm from the curb?

3 Answers
LeAmara
07/24/25 10:40am
Techniques for parking 30cm from the curb: 1. Find the appropriate entry position for parking by aligning the one-third point of the car hood; 2. Observe the distance between the right side of the vehicle and the road edge, making slight left and right adjustments to the steering wheel; 3. When the right front door handle is about to align with the curb, quickly straighten the car body; 4. Look at the right front door handle from the right rearview mirror, and when it is tangent to the edge line, stop the car, shift to neutral, engage the handbrake, release the clutch and brake, check the left rearview mirror to ensure safety, then unbuckle the seatbelt and exit the vehicle. Parking by the curb is a clearly defined assessment item in the road test, requiring the student to drive the vehicle and park it close to the curb.
Was this review help?
2
0
Share
Rose
08/11/25 2:24am
I think the key to parallel parking within 30cm lies in practice and making good use of visual reference points. After years of driving, I usually start by finding a spacious area to slow down gradually, like beginning to decelerate about 30 meters away. Then, I glance at the right-side rearview mirror, aiming to align the outer edge of the wheels roughly with the curb. At this point, avoid turning the steering wheel sharply—use subtle adjustments instead. The moment I notice any deviation, I gently steer to guide the car closer. Remember, don’t focus too closely; assess the overall position comprehensively. After parking, I often step out to check, ensuring the actual distance is around 30cm. A few tries, and you’ll develop a feel for it. This distance is crucial—too close risks scraping the rims, while too far violates traffic rules. Every time I drive out, I practice once, and within two weeks, it becomes second nature. Always stay aware of road conditions, especially in crowded areas where speed control is vital to avoid accidents. This approach ensures both safety and precision.
Was this review help?
10
0
Share
Expand All
McLogan
09/25/25 3:52am
As a beginner driver, parking 30cm from the curb did give me headaches at first. I usually slow down to a low gear first, focus on the roadside line on the right, and use the center of the car hood or the line below the window as a reference. While slowly moving over, I frequently check the rearview mirror to judge the changing distance between the wheels and the roadside. Don’t panic over small mistakes—if you’re too far away, just turn slightly to the right, but keep the angle small. After parking, always step out to measure and confirm the 30cm distance before practicing again. After a few tries, it becomes easier. When I started, I practiced in an empty lot and avoided busy hours. For safety, I always check behind me, use the turn signal, and avoid affecting pedestrians. This technique helps develop good habits and makes driving more stable.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What to do if the automatic transmission is stuck in P gear?

Solutions for automatic transmission stuck in P gear: 1. If the car has a shift lock gear lock, press the switch; 2. If there is no gear lock or the button does not work, you can pry open the shift dust cover, find the emergency switch of the shift mechanism, and press the switch. The correct method for parking and shifting gears: 1. Shift into N gear before parking; 2. Tighten the handbrake and then release the pedal; 3. After the car stops completely, shift into P gear. This way, the car will not slide forward or backward due to its own weight, avoiding the situation of the gear getting stuck when parking. Automatic transmission means that the driver does not need to manually shift gears. The vehicle will automatically select the appropriate gear to drive based on the speed and traffic conditions.
10
2
Share

What is the function of the button on an automatic transmission?

The function of the button on an automatic transmission: The button on an automatic transmission is called the shift lock button, also known as the gear lock. If the gear is accidentally engaged, unintended forward or backward movement could cause an accident. This button can eliminate safety hazards caused by misoperation. When shifting out of P (Park) or into R (Reverse) or P (Park), this shift lock button must be pressed to engage the gear. Introduction to automatic transmission gears: 1. P stands for Park; after the car stops, engaging P gear applies the brake to prevent movement. 2. N stands for Neutral; temporarily stopping the vehicle by engaging this gear stops the vehicle's motion without interrupting power. 3. R stands for Reverse; this gear can only be engaged when the vehicle is stationary. 4. S stands for Sport, suitable for overtaking and climbing hills.
16
2
Share

What is a Salvage Car?

Salvage cars refer to vehicles that have suffered damage from non-natural wear and tear accidents, resulting in decreased mechanical performance and economic value. The following scenarios classify a vehicle as a salvage car: 1. Vehicles where the engine compartment or passenger compartment has been damaged due to impact; 2. Vehicles where the rear quarter panel has been damaged by more than one-third due to impact; 3. Vehicles with welded, cut, reshaped, or deformed longitudinal beams; 4. Vehicles with welded, cut, reshaped, or deformed shock absorber mounts; 5. Vehicles with welded, cut, reshaped, or deformed A, B, or C pillars; 6. Vehicles where the airbags have deployed due to impact; 7. Vehicles with severe welding, cutting, reshaping, or deformation in other non-removable parts; 8. Vehicles where the body has been submerged in water exceeding half of its height, or where water has entered the passenger compartment.
14
3
Share

What are the classifications of windshield wipers?

Windshield wipers are divided into beam wipers and conventional wipers. Windshield wipers are important accessories installed on the windshield, and their function is to remove rain, snow, and dust that obstruct the view on the windshield glass. Windshield wipers play a crucial role in driving safety. Windshield wiper maintenance guide: 1. When using the wiper to remove dust from the windshield surface on a sunny day, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn or hard contaminants on the glass, they should be cleaned manually; 3. When lifting the wiper blade during car washing or daily cleaning, hold the spine of the wiper and slowly return it, avoiding snapping the wiper blade back suddenly; 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to avoid increasing the burden on the wiper.
4
2
Share

How to Renew a Driver's License in a Different Location?

Methods for renewing a driver's license in a different location: 1. Go to a photo studio with driver's license photography qualifications to take photos, obtaining a one-inch white background photo without a hat and a digital image collection system receipt; 2. Make a copy of your ID card and bring the original. If you are from another province, also bring your residence permit and a copy of it; 3. Go to the hospital designated by the vehicle management office for a physical examination, verify your ID, submit one photo, and obtain the motor vehicle driver's physical condition certificate to fill out and undergo the physical examination; 4. Go to the vehicle management office to get a number and queue up, receive a driver's license application form, and attach the photo; 5. When your number is called, submit the materials to the police at the vehicle management office, then wait a moment for the review; 6. After passing the review, you will receive a form to pay the fee. After paying, submit the form with the payment stamp back to the police.
17
0
Share

What does intermittent braking mean?

The meaning of intermittent braking is: first press the brake slightly, then release the brake (but not completely) when you feel the car decelerating significantly, and press the brake again when you feel the braking effect is about to disappear. Repeat this cycle. The applicable objects of intermittent braking: mostly used for large vehicles without ABS and with air brakes in the past, but the intermittent braking method will affect the smoothness and comfort of the vehicle. Small cars are lightweight, and if intermittent braking is not used for long downhill slopes, the wheel hubs will not overheat. It is not recommended to use intermittent braking for small cars to decelerate. The reason for using intermittent braking: because large vehicles are heavier, but air brakes respond faster than hydraulic brakes. To avoid locking the wheels and preventing the inability to steer, intermittent braking technique is adopted. The function of intermittent braking is: to prevent wheel lock-up, thereby controlling the vehicle from skidding.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.