What are the techniques for left and right turns in Subject Three of the driving test?

1 Answers
LaLeah
07/29/25 11:50am
Subject Three left turn techniques are as follows: When making a left turn at an intersection, you should slow down in advance and enter the left turn lane (if there is a left turn waiting area, enter it when the traffic light turns green) or wait on the left side of the road. When the traffic light turns green or the green left turn arrow lights up, promptly observe the traffic conditions ahead and to the side or check the left and rear traffic conditions through the interior and exterior rearview mirrors. At the same time, pay attention to whether there are right-turning vehicles from the opposite direction encroaching on your path to ensure a safe turn. Subject Three right turn techniques are as follows: Right turns must be made from the right lane, and the speed should not exceed 30 km/h. Observe the traffic conditions on both sides of the intersection.
Was this review help?
9
4
Share
More Forum Discussions

What to Do After Failing the Driving Test 5 Times?

If you fail the subject two or subject three driving test five times, you need to pay the fee again and re-register for the exam. Here are the relevant details: 1. All previously passed subjects will be invalidated, and no make-up exams will be offered. All previous results will be canceled, and you must retake the exam starting from subject one. 2. Within the validity period of the driving skill test permit, the number of scheduled exams for subject two and subject three road driving skills tests cannot exceed five. If you still fail the fifth scheduled exam, the results of other previously passed subjects will be invalidated. If you fail subject one or subject four five times, you can reapply without any limit on the number of attempts.
17
5
Share

What are some clever tips to deal with water on rearview mirrors during rain?

Here are some clever tips to handle water on rearview mirrors during rain: 1. Soap or toothpaste: Soap can disrupt the surface tension of water. When soap molecules enter the water, their polar hydrophilic parts break the attraction between water molecules, reducing the surface tension. This causes water to spread evenly over the treated glass surface, forming a thin film that adheres to the glass. The more rainwater hits the glass, the larger the film becomes, maintaining clear visibility. 2. Install rain deflectors: Adding rain deflectors to rearview mirrors is a common and cost-effective solution with noticeable results, especially suitable for drivers living in rainy areas. 3. Apply water repellent: Coating the rearview mirror with a water repellent can also keep the view clear. Many commercially available glass water repellents primarily contain silicone oil, which alters the surface tension of water on the glass, preventing water from sticking to the mirror's surface.
5
2
Share

Reasons Why the Car Air Conditioning Is Not Cold Enough

Reasons why the car air conditioning is not cold enough are as follows: 1. When the car is moving, the wind speed around the condenser is high, resulting in better heat exchange efficiency, which naturally improves performance. At idle speed, the temperature around the condenser is high, and the wind speed is low, preventing the refrigerant from cooling down effectively, leading to poor performance. If the system was working fine before but not now, it could be due to a damaged condenser fan. 2. Another possible reason is that the condenser is not dissipating heat, causing the air conditioning to not cool properly, especially the gap between the condenser and the radiator. If it hasn't been cleaned for years, it might be completely blocked. In this case, the high-pressure air pump needs to be blown or removed for cleaning. 3. It could also be due to a lack of refrigerant, leading to insufficient refrigerant in the air conditioning system's pipelines, reduced pressure, and less heat being removed, giving the impression that the air conditioning is only blowing air without cooling. Generally, there might be slight leaks in the air conditioning pipelines or condenser, which is a normal phenomenon.
11
4
Share

Does replacing the windshield count as an accident vehicle?

If the glass was damaged and replaced due to a collision caused by an accident, then it is considered an accident vehicle; if it was caused by an unexpected and uncontrollable event, such as a flying stone, leading to glass damage and replacement, then it does not count as an accident vehicle. Below is relevant information: 1. The car's front windshield has a large surface area and is prone to damage during driving. When severely damaged, it needs to be replaced promptly. 2. Replacing the front windshield should be done at a formal, professional repair shop, glass specialty store, or 4S shop. 3. There are many reasons for glass replacement, so it is necessary to determine whether the replacement was due to an accident or an unexpected event.
8
2
Share

Is Cleaning the Throttle Important?

The throttle is one of the most important components in today's electronic fuel injection engine systems. Its upper part connects to the air filter, and the lower part connects to the engine block, acting as the throat of the car engine. Benefits of regular throttle cleaning: 1. It can remove carbon deposits, improve the precision of air intake and fuel injection, enhance fuel efficiency, and extend the engine's lifespan. 2. Not cleaning the throttle for a long time can lead to throttle opening errors and allow impurities from the air to enter the engine combustion chamber. 3. Both of these outcomes can cause the engine to operate abnormally, mainly manifesting as unstable idling and a sudden opening of the throttle while driving, which can reduce power.
10
0
Share

How to Start a Car?

The steps to start a car are: 1. Press the clutch and wait for 5 to 8 seconds after turning the ignition key to the ON position; 2. Then turn the key to the start position to ignite the engine; 3. Immediately release the ignition key after the engine starts successfully, allowing it to automatically return to the ON position. Precautions for starting a car include: 1. Do not start the engine immediately after inserting the key; 2. For vehicles with a one-button start, do not press the brake when starting; 3. When using an ignition timing light or ignition timing tester, connect the instrument as instructed; 4. Let the car warm up for about 1 to 3 minutes after ignition.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.