···
Log in / Register

What are the techniques for identifying several types of traffic violations in Subject 4?

4 Answers
JanelleAnn
07/29/25 11:30pm

Subject 4 violation judgment techniques include: when counting violations in animations, pay attention to scene transitions; extend contextual clues from questions, and focus on daily knowledge accumulation. Below are judgment techniques for Subject 4 violations: 1. Match options with question stems and eliminate sequentially: Most violation judgment questions present a scenario in the stem, requiring candidates to select all violations committed by the driver from four options, appearing in both single-choice and multiple-choice formats. The approach is to cross-reference each option with the stem and eliminate incorrect choices. 2. Extend contextual clues from question stems and emphasize daily accumulation: Sometimes question stems provide indirect clues, requiring examinees to apply common sense for independent judgment.

Was this review help?
9
4
Share
DelVanessa
08/16/25 2:20am

I think when preparing for the illegal behavior section of Subject 4, the key is to memorize several common types such as speeding, drunk driving, and running red lights. For speeding questions, remember the urban limit of 60 km/h and the highway limit of 120 km/h, with the mnemonic 'slow in the city, fast on the highway.' For drunk driving questions, focus on the legal limit of over 20mg of alcohol—eliminate ambiguous options when answering. For red light violations, check whether the car crosses the line or runs a yellow light, and analyze the sequence of actions in animation questions. Other topics like not wearing seatbelts require everyone to buckle up, and illegal parking depends on whether the location blocks traffic. I practice daily with a test-prep app, and doing enough mock exams naturally makes me familiar with the material. Don’t worry about too many details; focus on the key points to pass. After all, the test is about driving safely—learning the rules protects lives, and this mindset has made me more vigilant when driving.

Was this review help?
1
3
Share
Expand All
RyleeLynn
10/19/25 2:28am

I passed Subject 4 last year, and the common violation techniques were quite practical. For speeding, remember the speed limits on different road sections, such as 80 on expressways. For drunk driving questions, pay attention to the testing value standards and don't mix them up. For running red lights, focus on the light color and timing of actions. Seat belts must be fastened tightly for both front and rear seats. When answering questions, it's recommended to practice by category. Don't just memorize when using apps for question practice; use examples to assist, such as imagining real-life scenarios, which significantly improves accuracy. During the exam, save time by first eliminating obviously wrong options in multiple-choice questions. Take your time with image-based questions to observe details carefully. Back then, this method made things easier for me, and now I remember the rules better when driving.

Was this review help?
19
2
Share
Expand All
MayaFitz
12/02/25 3:04am

For the subject four traffic violations, first understand that the core of speeding is memorizing speed limits, remember the threshold of 20mg for drunk driving, distinguish the timing for running red lights and avoid rushing yellow lights, and ensure all passengers fasten their seat belts without omission. In terms of techniques, practice more with question bank apps, especially mock exam questions, and use real-life examples to associate answers for better understanding rather than rote memorization. The strategy for multiple-choice questions is to quickly judge right or wrong from a safety perspective. Summarize patterns during daily study to prepare for the exam with ease.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

Does Turbocharging Make Noise?

Turbocharged engines are louder due to performance characteristics. The specific reasons and functions are as follows: Reasons for the louder sound in turbocharged engines: When the turbocharger activates, it's equivalent to two systems operating simultaneously. While the engine's operation remains unchanged, the rotation of the turbocharger's impeller (driven by exhaust gases) generates certain noise. Compared to non-activated turbochargers or vehicles of the same class without turbocharging, the sound naturally becomes louder. Function of turbocharging: The primary function of turbocharging is to increase the engine's air intake, thereby enhancing the engine's power and torque, making the vehicle more powerful.
6
0
Share

What is the Difference Between Turbocharging and Twin-Turbocharging?

A twin-turbocharged engine has two turbochargers, while a single-turbocharged engine has only one. Twin-turbocharged engines exhibit less turbo lag and provide faster power response. Twin-Turbocharging: Twin-turbocharging is one of the methods of turbocharging. To address the turbo lag phenomenon in exhaust turbocharging, two turbochargers—either one large and one small in series or two identical ones in parallel—are used. At low engine speeds, less exhaust gas is sufficient to drive the turbochargers to rotate at high speeds, generating adequate intake pressure and reducing the turbo lag effect. Turbocharging: A centrifugal compressor and a turbine are combined into a single unit, known as a turbocharger. In a turbocharger, the compressor impeller and the turbine are mounted on the same rotating shaft, forming the rotor. Other components, such as seals and thrust bearings, are also assembled on the same rotor shaft and rotate together.
18
4
Share

How High is the Temperature of a Turbocharger?

Turbochargers often operate under high-speed and high-temperature conditions, with the exhaust turbine side of the turbocharger reaching temperatures above 600 degrees Celsius. Introduction: A centrifugal compressor and turbine are combined into a single unit, known as a turbocharger. The main difference between it and a gas turbine is that the turbocharger does not have a combustion chamber or corresponding systems. The turbine operates using the exhaust energy from a reciprocating internal combustion engine, and the compressed air provided by its centrifugal compressor serves as the charge for the reciprocating internal combustion engine. Rotor: The rotor is the key component of a turbocharger. In addition, the turbocharger includes bearing assemblies necessary for normal operation, lubrication and cooling systems, sealing and insulation devices, as well as fixed components such as the compressor housing, intermediate housing, and turbine housing.
17
5
Share

Does Turbocharger Damage Affect the Engine?

Turbocharger damage can lead to a decrease in engine power. Turbocharger: A centrifugal compressor and turbine are combined into a single unit, known as a turbocharger. In a turbocharger, the compressor impeller and turbine are mounted on the same rotating shaft, referred to as the rotor. Also mounted on the same rotor shaft and rotating together are sealing components and thrust washers, among others. Turbocharged Engine: A turbocharged engine refers to an engine equipped with a turbocharger. A turbocharger is essentially an air compressor that increases the intake air volume by compressing air. It utilizes the inertial force of the exhaust gases expelled by the engine to drive the turbine in the turbine housing. The turbine, in turn, drives the coaxial impeller, which compresses the air delivered from the air filter duct, pressurizing it before it enters the cylinders.
14
0
Share

What are the symptoms of a turbocharger intake pipe leak?

The symptoms of a turbocharger air leak are that the car's exhaust pipe emits blue smoke during driving, the car's power decreases, fuel consumption increases, and it can also affect the engine's fuel consumption, causing unstable engine idle, engine noise, and unclear turbocharging effect. Turbocharger: A turbocharger is essentially an air compressor that increases the intake air volume by compressing air. It uses the inertial force of the exhaust gas from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller then pressurizes the air delivered from the air filter pipe, forcing it into the cylinders. Working Principle: The turbocharger utilizes pressure to rotate the pump impeller inside the housing, thereby driving the intake turbocharger impeller to compress air into the cylinders, thus enhancing the engine's output power as a control device.
1
2
Share

What does 'no TF card' mean?

When the dash cam does not detect a TF card, it means that no memory card is inserted into the dash cam, causing it to fail to operate normally. TF card, short for Trans-flash Card, serves as the recording medium for dash cams. Since dash cams need to capture footage of the driving route and store videos, they require a TF card. A dash cam without a TF card cannot store recorded videos, thus rendering it inoperable. Relevant information about dash cams is as follows: 1. Introduction: A dash cam is a device that records images, sounds, and other related information during vehicle travel. 2. Function: After installing a dash cam, it can record the entire driving process's video images and sounds, providing evidence for traffic accidents.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.