What are the techniques for hand-cranking a diesel engine to start?

How to Resolve the Automatic Parking Failure in Haval H6?

When the electronic parking system fails, it is necessary to go to a repair shop to read the fault code with a decoder and repair it according to the fault code to resolve the issue. Below is a detailed introduction about the automatic parking system: 1. Automatic parking refers to a function of automatic braking. After activating this function, it simplifies the operation by avoiding the use of the handbrake or electronic handbrake, and automatic transmission models do not need to frequently switch between D to N or D to P. 2. Automatic parking relies on an intelligent braking system, and only vehicles equipped with brake control systems like ESP can achieve the automatic parking function. 3. Traditional handbrakes require the driver to manually release the handbrake or skillfully coordinate the throttle and clutch for a smooth start on a slope. The automatic parking function, through a slope sensor, provides an accurate parking force from the controller. When the driving force exceeds the driving resistance, the parking brake is automatically released, allowing the car to start smoothly.

15

1

Share

What is the function of the B gear in the Corolla hybrid version?

The function of the B gear in the Corolla hybrid version is to utilize the engine to restrain the vehicle. The B gear is a braking gear, typically used on some continuous long downhill sections. Here is an introduction to the B gear in the Corolla hybrid version: 1. After engaging the B gear, the transmission is restricted by the locking mechanism to the low gears of 1-2, and then the vehicle uses the low gear braking by leveraging the engine's restraining effect, thereby relieving most of the pressure on the brakes. 2. The function of the B gear is similar to that of the L gear. The B gear can also be used for starting on steep slopes, providing the effect of low speed and high torque.

4

Share

How to Maintain a Car Battery?

Car battery maintenance methods: 1. Turn off all lights before turning off the engine: Manually turn off the car lights and interior reading lights before shutting down the engine. If you need to find something in the car or require lighting, you can use a mobile phone or flashlight for illumination, to avoid forgetting to turn off the reading light and causing battery power loss. 2. Turn off the air conditioning and audio system before turning off the engine: The air conditioning system involves the compressor and blower, and the audio is also a high-power electrical device. If not turned off before shutting down the engine, they will automatically start the next time the car is turned on, placing a heavy burden on the battery and causing damage. 3. Avoid leaving the vehicle parked for long periods: The battery installed in the car will self-discharge over time when left idle, so it's best to drive the car at least once a week, with a trip duration of at least 20 minutes, to facilitate charging the battery while driving. 4. Close all windows before turning off the engine: The operation of car windows and sunroofs relies on battery power, so it's best to close all windows before shutting down the engine.

10

5

Share

What are the differences between BYD DMp and DMi?

The differences between BYD DMp and DMi are as follows: 1. Displacement: Both are equipped with turbocharged engines, but the DMp comes with a 2.0T engine with a maximum power of 192 horsepower (141KW) and maximum torque of 320Nm, while the DMi features a smaller 1.5T engine with a maximum power of 139 horsepower (102KW) and maximum torque of 231Nm. 2. Technology: The 2.0T engine in the DMp, though more powerful, uses more conventional technology; the DMi system's latest 1.5T Xiaoyun engine employs the Miller cycle, making it more advanced, with higher thermal efficiency and lower fuel consumption. 3. Transmission: The DMp is equipped with a traditional 6-speed wet dual-clutch transmission, whereas the DMi uses an E-CVT continuously variable transmission. 4. Motor: Both use permanent magnet synchronous motors, but the DMi models all feature a front-mounted single motor, available in two versions: 145kw and 160kw. The DMp, in addition to a rear-mounted single motor version with 180kw, also offers two dual-motor models with front + rear (250kw + 180kw) configurations. 5. Drive: All DMp models are four-wheel drive, while the DMi models are all two-wheel drive.

10

0

Share

Is Cruise Control More Fuel-Efficient or Is Manual Driving More Fuel-Efficient?

Whether cruise control is more fuel-efficient or manual driving is more fuel-efficient depends on the actual road conditions: 1. The cruise control function, during long-distance driving on highways, reduces fatigue and minimizes unnecessary speed variations. Since the computer can automatically control fuel injection and the vehicle operates at a constant speed and under consistent load, it is undoubtedly more fuel-efficient under such road conditions. 2. However, on uphill or downhill roads, to maintain the set speed requirement, the cruise control system may frequently apply brakes or accelerate, leading to higher fuel consumption compared to manual driving.

4

2

Share

Where are the motors used in Tesla produced?

Tesla's motors are three-phase induction motors produced by Taiwan's Fukuta Electric. An induction motor is a device where the rotor is placed in a rotating magnetic field, and under the influence of this field, it obtains a rotational torque, causing the rotor to turn. The electrical braking methods of Tesla's three-phase induction motor are as follows: 1. Dynamic Braking: During dynamic braking, the three-phase AC power supply to the motor is cut off, and DC power is supplied to the stator windings. At the moment the AC power is cut off, due to inertia, the motor continues to rotate in the original direction. This method is characterized by smooth braking but requires a DC power source and high-power motors, making the DC equipment costly, and the braking force is small at low speeds. 2. Plug Braking: Plug braking is further divided into load plug braking and power plug braking. (1) Load plug braking is also known as load reverse plug braking. This torque allows heavy objects to descend slowly at a stable speed. The characteristics of this braking method are: the power supply does not need to be reversed, no special braking equipment is required, and the braking speed can be adjusted. However, it is only suitable for wound-rotor motors, whose rotor circuit needs to be connected in series with a large resistor to make the slip ratio greater than 1. (2) Power plug braking: When the motor needs to be braked, simply swap any two-phase power lines to reverse the rotating magnetic field for quick braking. When the motor speed reaches zero, the power supply is immediately cut off. The characteristics of this braking method are: fast stopping, strong braking force, and no need for braking equipment. However, during braking, due to the high current, the impact force is also large, which can easily cause the motor to overheat or damage parts of the transmission system. 3. Regenerative Braking: Also known as feedback braking, under the influence of heavy objects, the motor's speed exceeds the synchronous speed of the rotating magnetic field. At this time, the rotor conductors generate an induced current, which produces a torque in the opposite direction of rotation under the influence of the rotating magnetic field. However, since the motor speed is high, a speed reduction device is needed to slow it down.

20

2

Share

What are the techniques for hand-cranking a diesel engine to start?

How to Resolve the Automatic Parking Failure in Haval H6?

What is the function of the B gear in the Corolla hybrid version?

How to Maintain a Car Battery?

What are the differences between BYD DMp and DMi?

Is Cruise Control More Fuel-Efficient or Is Manual Driving More Fuel-Efficient?

Where are the motors used in Tesla produced?

What is the normal tire pressure range for the Lavida?

What to Do When Mercedes-Benz Cannot Detect the Key and Fails to Start?

Where Are Lexus Factories Located?

What model is the Honda Life?