What are the techniques for aligning with arrows in Subject 2?

2 Answers
Luca
07/28/25 8:04pm
Here are the relevant techniques for aligning with arrows in Subject 2: 1. Rearview mirror method: When the door handle of the car body is almost aligned with the sideline in the rearview mirror, the 30 cm alignment is very accurate at this time; 2. Hood method: Many test vehicles are from the Poussin series, so to find the 30 cm alignment, you can directly align the 1/3 point of the vehicle's hood with the sideline. For vehicles like Jetta, you can use the small central dot of the wiper to align with the sideline, and then combine it with the first method for observation, which also makes it easy to maintain the 30 cm distance; 3. Simple auxiliary judgment method: During the test in the examination area, there are often tire marks. If you really can't find the alignment, look for these marks, although there may be some risks, or they may not be visible in rainy weather. Additionally, there are auxiliary arrows in the examination area. You can also align the steering wheel with the arrow and follow it. For example, many driving schools have arrows in the slope starting project, and aligning with the arrow makes it easy to solve the 30 cm alignment problem.
Was this review help?
17
3
Share
LaKatherine
08/12/25 12:53am
A few days ago, I took my students to practice the slope stopping technique, where the key to aligning with the arrow lies in identifying the right reference point. I usually have them focus on the raised part on the right side of the engine hood. When this point aligns with the tip of the arrow on the ground, it means the front bumper is in the correct position. At this moment, they must decisively press the clutch and brake—even a delay of a fraction of a second can cause the car to roll back. The steering wheel should be straightened in advance, as any deviation to the left or right will result in point deductions. A similar method can be applied in reverse parking by observing the distance between the car body and the arrow in the rearview mirror. A common mistake students make is focusing solely on the arrow while neglecting speed control, so I always remind them of the importance of maintaining the semi-clutch state. Mastering these details can significantly improve their exam pass rate.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What are the dimensions of the Honda XR-V?

Honda XR-V has dimensions of 4270/1772/1605mm with a wheelbase of 2610mm. More information about the XR-V is as follows: 1. Exterior: As a new masterpiece in the subcompact SUV segment by Dongfeng Honda, the XR-V inherits the excellent quality and manufacturing craftsmanship of the CR-V, featuring a "stylish and dynamic" exterior and a refined interior. Aligning with the tastes of young consumers, the XR-V boasts a fashionable yet not flashy appearance, masculine yet not rugged. 2. Features: Adopting the "Solid Wing Face" design concept, the streamlined arc-wing front grille offers a rich sense of depth. The soft and glossy piano black trim on the center console and the brown-red metallic brushed texture of the gear shift area panel create a stylish and premium interior atmosphere.
6
0
Share

Why does the Geely Emgrand trunk automatically pop open?

Geely Emgrand's trunk popping open after being closed may be due to the car key being mistakenly placed in the trunk, causing it to open automatically. Reasons for automatic opening: The Geely Emgrand is equipped with an anti-lock trunk feature, primarily to prevent drivers and passengers from leaving the car key inside the trunk. If the car key is accidentally placed in the trunk or is very close to the trunk, the Geely Emgrand's trunk will sense the presence of the key, resulting in the trunk opening and then popping open again. Measures to prevent automatic opening: As long as the owner ensures the key is properly held and not left in the trunk when closing the vehicle's trunk, the situation of the trunk being closed and then opening again can be avoided.
18
5
Share

How to reset the tire pressure light on Volkswagen T-Roc?

To reset the tire pressure on the Volkswagen T-Roc, follow these steps: 1. Start the car's ignition, and locate a black button below the instrument panel with the label "0.0"; 2. After starting the car, press and hold the black button below the instrument panel for a while. The instrument panel will display a message asking to confirm the reset of maintenance service data or vehicle condition check service data. Once this interface appears, press the black button again. Here are some additional details: 1. The Volkswagen T-Roc is a compact SUV with dimensions of 4318 mm in length, 1819 mm in width, and 1582 mm in height, and a wheelbase of 2680 mm. 2. Suspension: The front suspension of the Volkswagen T-Roc is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension.
15
1
Share

Why Does the Land Rover Range Rover Always Lack Coolant?

Land Rover Range Rover lacks coolant due to coolant leakage. The reasons for coolant leakage include radiator damage, poor sealing of the upper and lower water chambers causing coolant leakage, and loose sealing at the junction surfaces of the overflow tank, water pump, and various pipe connections in the cooling system leading to coolant leakage. Methods to determine if coolant is lacking: Observe the coolant warning light on the dashboard. If it lights up, it is likely due to a lack of coolant, although it could also be caused by excessively high cylinder temperatures. Check the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Check the water level markings on the coolant reservoir. The normal coolant level should be between the maximum and minimum marks. Whether coolant is lacking depends on the markings. If the coolant level is below the minimum mark, it indicates a lack of coolant.
6
1
Share

What are the differences between the 2021 and 2022 Sylphy models?

The differences between the 2021 and 2022 Sylphy models lie in exterior dimensions, rear brakes, and powertrain. Dimensions: The 2021 model measures 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm. The 2020 model measures 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. Rear brakes: The 2020 Sylphy features disc rear brakes, while the 2021 model uses drum rear brakes. Powertrain: The 2021 model is equipped with a 1.6L naturally aspirated engine with a maximum output of 139 horsepower, which complies with China's National VI emission standards. The 2021 model has 4 fewer horsepower than the 2020 model.
1
5
Share

What are the dimensions of the Rolls-Royce Phantom?

The long-wheelbase version of the Rolls-Royce Phantom measures 5990 mm in length, 2018 mm in width, and 1656 mm in height, with a wheelbase of 3772 mm. The standard-wheelbase version measures 5770 mm in length, 2018 mm in width, and 1648 mm in height, with a wheelbase of 3552 mm. Details about the Rolls-Royce Phantom are as follows: 1. The Rolls-Royce Phantom is a large luxury sedan, equipped with a 6.7-liter V12 twin-turbocharged engine across all models. This engine delivers 571 horsepower and a maximum torque of 900 Nm, achieving peak power at 5000 rpm and maximum torque at 1700 rpm. The engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Rolls-Royce Phantom employs a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The multi-link suspension enhances the tire's ground contact performance, thereby improving traction.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.