···
Log in / Register

What are the technique steps for starting on a slope in Subject 2?

1 Answers
JaylaFitz
07/25/25 1:36am

Without using the handbrake, while keeping the foot brake pressed, slowly release the clutch until the vehicle body vibrates, then release the brake and press the accelerator. Generally, press the brake firmly with the heel and the accelerator with the toe. While revving the engine, slowly release the clutch with the left foot, lift the right heel off the brake, press the accelerator while releasing the clutch to complete the slope start. This method is suitable for less strict situations, such as when there is no vehicle behind and the slope is not steep. Simply release the brake, quickly press the accelerator and lift the clutch to complete the start.

Was this review help?
1
5
Share
More Forum Discussions

What are the deduction criteria for meeting oncoming vehicles in Subject 3?

Subject 3 meeting oncoming vehicles deduction criteria are as follows: Incorrect turn signal usage: Failing to use the turn signal as required before meeting an oncoming vehicle results in a 20-point deduction, and if the turn signal is activated for less than three seconds, a 10-point deduction is applied. Incorrect meeting distance: On roads without a centerline or central divider, failing to slow down and keep to the right as required, and not maintaining a safe distance from other vehicles or pedestrians, results in disqualification. Other disqualifying situations: Failing to yield as required when meeting is difficult, poor judgment of lateral safety distance, and not completing the meeting within the specified time and road section. All three of these meeting situations are treated as disqualifications.
11
2
Share

What does it mean to not follow the examiner's instructions?

Not following the examiner's instructions means: During the Subject 3 driving test, if you do not operate the vehicle according to the examiner's commands, you will be judged as failing the test. Remember the lighting test well: Before driving on the road, ensure all aspects are checked properly. During the lighting test, listen carefully and stay focused. Operations must be performed correctly: When starting the car, depress the clutch, shift gears, honk the horn, turn on the signal, release the handbrake, etc. Each step must be executed accurately. Changing lanes and making U-turns: Remember to signal and wait for 3 seconds before turning the steering wheel, gradually changing lanes and straightening the car. Hold the steering wheel steady: During straight-line driving and overtaking, maintain a steady grip on the steering wheel without unnecessary movements to avoid crossing the lane markings.
11
0
Share

What Type of Window Tinting is Allowed for Vans by Traffic Police?

Traffic police allow vans to use window tinting that meets the following requirements: Front windows: The visible light transmittance of the front windshield and the side windows used by the driver to observe the rearview mirrors must reach 70%. Additionally, no mirrored reflective film is allowed on any window glass. Rear windows: To facilitate law enforcement officers in observing the interior of the vehicle and promptly detecting illegal transportation activities, vans are prohibited from using opaque or mirrored reflective tinting films on any window glass. The visible light transmittance of the side windows and rear windshield must reach 50%. Other requirements: For vans that comply with the standard requirements, during daylight and under natural lighting conditions, law enforcement officers outside the vehicle should be able to clearly observe the interior through the side windows and rear windshield.
19
1
Share

What is the method to activate ETC?

The method to activate ETC is: 1. Follow the relevant ETC software; 2. Click on 'Online Activation' in the software and enter the vehicle and owner's information; 3. Activate and upload photos of the front and front face of the vehicle; 4. Insert and remove the ETC card from the device twice consecutively until the display shows 'Bluetooth Connected,' and it automatically indicates successful activation. Notes for using ETC: 1. Maintain a distance of more than 10 meters from the vehicle in front to prevent automatic sensing from charging the wrong vehicle; 2. When using a debit card linked to ETC, insufficient balance may also cause payment failure; 3. The ETC lane recognizes vehicle speed at 20 km/h, and if the speed is too fast, it may fail to read the vehicle's device information, leading to payment failure.
18
5
Share

Can I still enjoy the three guarantees without going to the 4S store for maintenance?

Can I still enjoy the three guarantees without going to the 4S store for maintenance? As long as the first maintenance of a new car is carried out at the 4S store, subsequent maintenance can still enjoy the three guarantees even if it is not done at the 4S store. The following is a related introduction about the three guarantees for automobiles: Introduction: The three guarantees policy for automobiles is the abbreviation of "repair, replacement, and refund" implemented by retail businesses for the goods they sell. It refers to a credit guarantee method adopted by the seller for the goods purchased by the buyer within a certain period after the goods enter the consumer field. Content: If the same fault is repaired more than 5 times, the car can be replaced. During the validity period of the three guarantees, if the cumulative repair time of the car exceeds 35 days, or the cumulative number of repairs caused by the same product quality problem exceeds 5 times, the consumer can replace the car. If the repair time exceeds 5 days, the owner has the right to drive a spare car.
4
4
Share

What is the method to start a manual transmission car?

Manual transmission car starting method is: 1. Press the clutch pedal all the way down; 2. Push the gear lever to engage the 1st gear; 3. Gently press the turn signal lever downward to turn on the left turn signal, indicating the front and rear of the car; 4. Press the horn button to alert pedestrians in front of the vehicle to prepare for starting; 5. Release the vehicle's handbrake; 6. Lift the left foot until the clutch is in a semi-engaged state, and the vehicle begins to vibrate slightly; 7. The vehicle starts to move, release the clutch and gently press the accelerator. The correct sequence for stopping a manual transmission car: 1. Turn on the right or left turn signal; 2. Gently press the brake to reduce speed, observe the right rearview mirror and drive to the right; 3. When the speed is relatively low, press the clutch pedal, and pay attention to the surrounding distance when stopping; 4. After the car is stationary, shift the gear to neutral, turn off the turn signal, pull the handbrake, and turn off the engine.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.