What are the symptoms of water in the fuel tank?

1 Answers
ODerek
07/30/25 10:18am
When there is water in the fuel tank, the car may experience difficulties in starting, engine shaking, backfiring, high idle speed, or insufficient power. Water in the fuel tank can also cause rust, corrosion, and blockage in the fuel tank and fuel lines, affecting the normal fuel supply of the fuel system. This can lead to poor combustion, unstable idle speed, and poor acceleration. The presence of water in gasoline can cause rust on the inner walls of the metal fuel tank. When rust particles adhere to the fuel pump's filter screen, the resistance to fuel suction increases, resulting in insufficient fuel supply to the engine and reduced power. Over time, the fuel pump may fail. Gasoline is prone to mixing with water during production, storage, and transportation, especially in large oil tanks where the gasoline at the bottom tends to have higher water content.
Was this review help?
14
2
Share
More Forum Discussions

How to Remove Asphalt from a Car?

Methods for cleaning asphalt from a car: 1. Repeatedly apply car wax to remove the asphalt and tar stuck on the car body; 2. After wiping it off, use a clean cotton cloth to wipe the area again, which will thoroughly remove any residual tar stains from the car body. The principle is that the oil in the wax can dissolve the tar in the asphalt. If asphalt is still adhering to the car body, you can use a "tar remover" by evenly spraying it on the areas with asphalt and wiping with a cleaning cloth. This will quickly penetrate, dissolve, and remove stubborn stains such as tar, asphalt, and bird droppings from the car. However, this cleaner also has some corrosive properties, so be sure to rinse thoroughly after use.
11
0
Share

Is the BMW 3 Series fuel consumption high?

BMW 3 Series fuel consumption is 8.0 liters per 100 kilometers, which is not very high. Reasons for increased fuel consumption: Using higher viscosity engine oil increases resistance during engine operation; prolonged warm-up can lead to more carbon deposits and the engine injects more fuel to maintain operation at low temperatures; frequent short-distance driving; carrying heavy items in the car for extended periods; low tire pressure; switching to wider tires. Impact of temperature on fuel consumption: Fluctuations in fuel consumption due to temperature changes are normal. Generally, in winter when temperatures are low, fuel consumption increases slightly, almost comparable to fuel consumption when using air conditioning in summer. This is because lower temperatures cause the engine to dissipate more heat. If the vehicle hasn't been serviced for a long time, dirty engine oil and air filters can also lead to increased fuel consumption.
9
5
Share

What Causes the Steering Wheel Noise When BMW 3 Series Turns in Place?

BMW 3 Series steering wheel noise when turning in place is caused by lack of lubricant in the screws inside the steering wheel, or potential failure of the steering gear. Below are the reasons and solutions for the steering wheel noise in BMW 3 Series when turning in place: Lack of Lubricant in Screws: If there is a lack of lubricant in the screws inside the steering wheel, the steering wheel cover needs to be removed to add lubricant. This should make the tracks and pivots smoother, resolving the issue. Steering Gear Failure: The steering gear may malfunction. If the steering wheel is turned too sharply during normal driving, it increases the load on the steering gear, leading to severe wear and noise. It is recommended to inspect and replace the faulty parts. Coupler Oil Not Replaced: If the coupler oil has not been replaced for a long time, it can cause imbalance or shaking. It is advisable to check whether replacement is necessary. Uneven Tire Pressure: Uneven tire pressure in the left front or right front tire can cause the front of the car to pull to one side, resulting in unbalanced wheel bearings, misaligned steering gear, noise, and pulling.
1
4
Share

What Causes Steering Noise in BMW 3 Series?

BMW 3 Series steering noise is caused by aging of the steering tie rod ball joint and dirty power steering fluid. Below are the specific causes and solutions for BMW 3 Series steering noise: Aging of the steering tie rod ball joint: This requires replacing the steering tie rod ball joint, and after replacement, a four-wheel alignment is necessary. If the steering gear dust cover is leaking oil, replacing the dust cover and reapplying grease can solve the issue. Dirty power steering fluid: If the power steering fluid is too dirty, it increases the pressure in the power steering system, causing noise from the power steering pump. The steering system mainly consists of the steering column, steering wheel, steering shaft, and other components.
20
2
Share

What is the fuel consumption of the BMW 535?

BMW 535 official comprehensive fuel consumption: 8.3L/100km. How to check fuel consumption: The fuel consumption of BMW is displayed on the LCD screen of the central instrument panel. It needs to be adjusted by the display function toggle button. BMW X3 fuel consumption: 11.2L/100km. Methods to reduce fuel consumption: Regular maintenance should be performed to keep the engine in good condition, and unnecessary items should not be left in the car. Drive in the correct gear, release the accelerator early when approaching traffic lights, anticipate road conditions in advance to reduce unnecessary braking and sudden acceleration, and avoid traveling during peak traffic hours. All these methods help to reduce fuel consumption.
19
5
Share

How much horsepower does the BMW 525 have?

BMW 525 has a maximum horsepower of 184Ps, 135 kilowatts, at 5000-6500 rpm. BMW X2: The BMW X2 is equipped with a 2.0T turbocharged engine that can output 192 horsepower. Differences in horsepower: When comparing cars of the same displacement, the greater the horsepower, the more sufficient the car's power will be. Similarly, the greater the car's horsepower, the larger the car's displacement, and the larger the displacement, the higher the fuel consumption. Therefore, when buying a car, you should choose a car based on your actual situation. Meaning of horsepower: Horsepower is a commonly used unit of measurement for power in engineering. 1 horsepower is approximately equal to 735 watts. Generally, it refers to metric horsepower rather than imperial horsepower.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.